Hi,
Thanks for the held Jared,
I tried to disable pf (pfctl -d) and it continues to loss packets, i
changed the rules to use state on all and raised the limit on it to
about 300.000, so i think this is not a problem, and since pfctl -d
didn't resolve the packet lost i begin to suspect something on the
bridge code, as i don't see any error on the interface.
The count on in and out are different because the pf is blocking some
packets but the big problem is that some packets doesn't get even on the
interface, my setup is like "add em0 add em1 up" on bridgename.bridge0
and "up" on the ifs, i also enabled STP as my ISP told me it would help
their redundancy.
It happens to loss all kinds of packet, from now i detected on icmp and
tcp with hping, any help on how to trace better this problem?
Thanks, in advance,
To who might interest, bellow is my dmesg
$ dmesg
OpenBSD 3.7 (GENERIC.MP) #50: Sun Mar 20 00:17:19 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 2146459648 (2096152K)
avail mem = 1952657408 (1906892K)
using 4278 buffers containing 107425792 bytes (104908K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 05/31/04, BIOS32 rev. 0 @ 0xfd6e0
pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde80/352 (20 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000
0xd2000/0x1000 0xd3000/0x4800
mainbus0: Intel MP Specification (Version 1.4) ( PLACER CRB )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133 MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
cpu3 at mainbus0: apid 7 (application processor)
cpu3: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 6 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 3 pa 0xfec80000, version 20, 24 pins
ioapic2 at mainbus0: apid 4 pa 0xfec80100, version 20, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7505 MCH Host" rev 0x03
vendor "Intel", unknown product 0x2551 (class undefined unknown subclass
0x00, rev 0x03) at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 1 function 0 "Intel E7505 MCH AGP" rev 0x03
pci1 at ppb0 bus 1
ppb1 at pci0 dev 2 function 0 "Intel E7505 MCH PCI-PCI" rev 0x03
pci2 at ppb1 bus 2
"Intel P64H2 IOxAPIC" rev 0x04 at pci2 dev 28 function 0 not configured
ppb2 at pci2 dev 29 function 0 "Intel 82870P2 P64H2 PCI-PCI" rev 0x04
pci3 at ppb2 bus 3
em0 at pci3 dev 3 function 0 "Intel PRO/1000MT DP (82546EB)" rev 0x01:
apic 4 int 6 (irq 11), address: 00:30:48:72:95:1a
em1 at pci3 dev 3 function 1 "Intel PRO/1000MT DP (82546EB)" rev 0x01:
apic 4 int 7 (irq 11), address: 00:30:48:72:95:1b
"Intel P64H2 IOxAPIC" rev 0x04 at pci2 dev 30 function 0 not configured
ppb3 at pci2 dev 31 function 0 "Intel 82870P2 P64H2 PCI-PCI" rev 0x04
pci4 at ppb3 bus 4
pciide0 at pci4 dev 3 function 0 "CMD Technology SiI3112 SATA" rev 0x02: DMA
pciide0: using apic 3 int 2 (irq 11) for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <WDC WD360GD-00FNA0>
wd0: 16-sector PIO, LBA48, 35304MB, 72303840 sectors
wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 6
pciide0: port 1: device present, speed: 1.5Gb/s
wd1 at pciide0 channel 1 drive 0: <WDC WD360GD-00FNA0>
wd1: 16-sector PIO, LBA48, 35304MB, 72303840 sectors
wd1(pciide0:1:0): using BIOS timings, Ultra-DMA mode 6
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: apic 2 int
16 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: apic 2 int
19 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: apic 2 int
18 (irq 5)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: apic 2 int
23 (irq 11)
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x82
pci5 at ppb4 bus 5
vga1 at pci5 dev 1 function 0 vendor "SIS", unknown product 0x0325 rev
0x00: aperture at 0xe0000000, size 0x400000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
rl0 at pci5 dev 2 function 0 "Realtek 8139" rev 0x10: apic 2 int 17 (irq
12) address 00:08:54:2a:ee:26
rlphy0 at rl0 phy 0: RTL internal phy
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02
pciide1 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide1: channel 0 disabled (no drives)
pciide1: channel 1 disabled (no drives)
"Intel 82801DB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 0 netmask 0 ttymask 0
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
dkcsum: warning: dup BSD->BIOS disk mapping
dkcsum: wd1 had no matching BIOS disk
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
