Hi, I want to use a sunblade 100 with openbsd as my primary desktop. Unfortunately I'm not able to get the keyboard to work (sun usb type 6 swedish layout). After installing the miniroot.fs to the harddisk and resetting the machine it booted to the prompt where one can choose between shell, upgrade and install. I wasn't able to type anything here. I then installed over a serial line and it worked fine. After rebooting with the keyboard attached it booted to the login prompt but still I was not able to type anyhting here. Login over the network just works fine. I also can find the keyboard within the dmesg output. The eeprom command shows keyboard as input-device. The same behaviour can be seen with the 3.7 release and the latest snapshot. My OpenBoot version is 4.17.1. I'm new to openbsd maybe I'm missing something obvious here.
Thanks in advance, mark dmesg: OpenBSD 3.8-beta (GENERIC) #596: Wed Aug 24 07:36:33 MDT 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC total memory = 1073741824 avail memory = 968990720 using 6553 buffers containing 53682176 bytes of memory bootpath: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],0/[EMAIL PROTECTED],0 mainbus0 (root): Sun Blade 100 (UltraSPARC-IIe) cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 502 MHz, version 0 FPU cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 1024K external (64 b/l) psycho0 at mainbus0 pci108e,a001: impl 0, version 0: ign 7c0 bus range 0 to 1; PCI bus 0 DVMA map: c0000000 to e0000000 IOTDB: 4d0a000 to 4d8a000 pci0 at psycho0 ebus0 at pci0 dev 12 function 0 "Sun PCIO Ebus2 (US III)" rev 0x01 flashprom at ebus0 addr 0-fffff not configured clock1 at ebus0 addr 0-1fff: mk48t59: hostid 83087c13 ebus_attach: idprom: incomplete gem0 at pci0 dev 12 function 1 "Sun ERI Ether" rev 0x01: ivec 3006, address 00:0 3:ba:08:7c:13 ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface ukphy0: OUI 0x0010dd, model 0x0002, rev. 1 "Sun FireWire" rev 0x01 at pci0 dev 12 function 2 not configured ohci0 at pci0 dev 12 function 3 "Sun USB" rev 0x01: ivec 24, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Sun OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ebus1 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00 dma at ebus1 addr 0-ffff ipl 42 not configured power at ebus1 addr 800-82f ipl 32 not configured com0 at ebus1 addr 3f8-3ff ipl 43: ns16550a, 16 byte fifo com1 at ebus1 addr 2e8-2ef ipl 43: ns16550a, 16 byte fifo "Acer Labs M7101 Power" rev 0x00 at pci0 dev 3 function 0 not configured autri0 at pci0 dev 8 function 0 "Acer Labs M5451 Audio" rev 0x01: ivec 23 ac97: codec id 0x41445348 (Analog Devices AD1881A) ac97: codec features headphone, Analog Devices Phat Stereo audio0 at autri0 midi0 at autri0: <4DWAVE MIDI UART> pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc3: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using ivec 180c for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <IBM-DJNA-372200> wd0: 16-sector PIO, LBA, 21557MB, 44150400 sectors atapiscsi0 at pciide0 channel 0 drive 1 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <PIONEER, 12X DVD-ROM, 1.14> SCSI0 5/cdrom removable wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) ppb0 at pci0 dev 5 function 0 "DEC 21152 PCI-PCI" rev 0x03 pci1 at ppb0 bus 1 vgafb0 at pci1 dev 1 function 0 "Intergraph Expert3D" rev 0x00 vgafb0: failed to find all ports vgafb1 at pci0 dev 19 function 0 "ATI Rage XL" rev 0x27 wsdisplay0 at vgafb1 wsdisplay0: screen 0 added (std, sun emulation) pcons0 at mainbus0 No counter-timer -- using %tick at 502MHz as system clock. uhidev0 at uhub0 port 1 configuration 1 interface 0 uhidev0: Sun Microsystems Type 6 Keyboard, rev 1.00/1.02, addr 2, iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd0 at ukbd0: console keyboard uhidev1 at uhub0 port 2 configuration 1 interface 0 uhidev1: Sun Microsystems Type 6 Mouse, rev 1.00/1.02, addr 3, iclass 3/1 ums0 at uhidev1: 3 buttons wsmouse0 at ums0 root on wd0a rootdev=0xc00 rrootdev=0x1a00 rawdev=0x1a02
