Hi, I followed all the suggested solutions to mend the not responding keyboard on my sunblade 100 but unfortunately I didn't succeed. Here a quick overview:
- OpenBoot version is 4.17.1. ( I've applied sun patch 111179 as recommended in the install notes, hence I think the OpenBoot is running the newest firmware version.) - the keyboard works in OpenBoot mode and stops, except for the CapsLock and NumLock keys where I can see the LED blink when the keys are pressed, working after OpenBSD is booted. - I corrected the keyboard encoding using wsconsctl keyboard.enconding=sv (also made it permanent in /etc/wsconsctl.conf - wsconscfg -k issued on tty /dev/ttyp0 gives the following error message "wsconscfg: WSMUX_ADD_DEVICE: Device not configured" - unfortunately I've no usb keyboard with English layout to test with. Thanks for all your help mark dmesg: OpenBSD 3.8-beta (GENERIC) #596: Wed Aug 24 07:36:33 MDT 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC total memory = 1073741824 avail memory = 968990720 using 6553 buffers containing 53682176 bytes of memory bootpath: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],0/[EMAIL PROTECTED],0 mainbus0 (root): Sun Blade 100 (UltraSPARC-IIe) cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 502 MHz, version 0 FPU cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 1024K external (64 b/l) psycho0 at mainbus0 pci108e,a001: impl 0, version 0: ign 7c0 bus range 0 to 1; PCI bus 0 DVMA map: c0000000 to e0000000 IOTDB: 4d0a000 to 4d8a000 pci0 at psycho0 ebus0 at pci0 dev 12 function 0 "Sun PCIO Ebus2 (US III)" rev 0x01 flashprom at ebus0 addr 0-fffff not configured clock1 at ebus0 addr 0-1fff: mk48t59: hostid 83087c13 ebus_attach: idprom: incomplete gem0 at pci0 dev 12 function 1 "Sun ERI Ether" rev 0x01: ivec 3006, address 00:0 3:ba:08:7c:13 ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface ukphy0: OUI 0x0010dd, model 0x0002, rev. 1 "Sun FireWire" rev 0x01 at pci0 dev 12 function 2 not configured ohci0 at pci0 dev 12 function 3 "Sun USB" rev 0x01: ivec 24, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Sun OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ebus1 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00 dma at ebus1 addr 0-ffff ipl 42 not configured power at ebus1 addr 800-82f ipl 32 not configured com0 at ebus1 addr 3f8-3ff ipl 43: ns16550a, 16 byte fifo com1 at ebus1 addr 2e8-2ef ipl 43: ns16550a, 16 byte fifo "Acer Labs M7101 Power" rev 0x00 at pci0 dev 3 function 0 not configured autri0 at pci0 dev 8 function 0 "Acer Labs M5451 Audio" rev 0x01: ivec 23 ac97: codec id 0x41445348 (Analog Devices AD1881A) ac97: codec features headphone, Analog Devices Phat Stereo audio0 at autri0 midi0 at autri0: <4DWAVE MIDI UART> pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc3: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using ivec 180c for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <IBM-DJNA-372200> wd0: 16-sector PIO, LBA, 21557MB, 44150400 sectors atapiscsi0 at pciide0 channel 0 drive 1 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <PIONEER, 12X DVD-ROM, 1.14> SCSI0 5/cdrom removable wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) ppb0 at pci0 dev 5 function 0 "DEC 21152 PCI-PCI" rev 0x03 pci1 at ppb0 bus 1 vgafb0 at pci1 dev 1 function 0 "Intergraph Expert3D" rev 0x00 vgafb0: failed to find all ports vgafb1 at pci0 dev 19 function 0 "ATI Rage XL" rev 0x27 wsdisplay0 at vgafb1 wsdisplay0: screen 0 added (std, sun emulation) pcons0 at mainbus0 No counter-timer -- using %tick at 502MHz as system clock. uhidev0 at uhub0 port 1 configuration 1 interface 0 uhidev0: Sun Microsystems Type 6 Keyboard, rev 1.00/1.02, addr 2, iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd0 at ukbd0: console keyboard uhidev1 at uhub0 port 2 configuration 1 interface 0 uhidev1: Sun Microsystems Type 6 Mouse, rev 1.00/1.02, addr 3, iclass 3/1 ums0 at uhidev1: 3 buttons wsmouse0 at ums0 root on wd0a rootdev=0xc00 rrootdev=0x1a00 rawdev=0x1a02
