> Jonathan Weiss wrote:
>
>> Cheers,
>>
>> I have a Problem with a WRAP board (dmesg attached) and a MiniPCI WLAN card.
>> The card is a Wistron CM9. My /etc/hostname.ath0 looks like this:
>>
>> #cat /etc/hostname.ath
>> inet 192.168.1.1 255.255.255.0 NONE media autoselect \
>> mediaopt hostap nwid wrap chan 11
>>
>> #ifconfig ath0
>> ath0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>> address: 00:0b:6b:35:b0:1b
>> ieee80211: nwid wrap chan 11 bssid 00:0b:6b:35:b0:1b
>> media: IEEE802.11 autoselect hostap (autoselect mode 11a hostap)
>> status: active
>> inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
>> inet6 fe80::20b:6bff:fe35:b01b%ath0 prefixlen 64 scopeid 0x1
>>
>> But I cannot join the network and also cannot see it with a WLAN-scanner
>> (Kismac on a PowerBook with OS X).
>>
>> Lately there have been some reports about problems with WRAP/ath/OpenBSD.
>>
>> Does ath in hostap mode works in 3.7 or do I have to upgrade to current?
> I am still getting *my* feet wet with wireless in OpenBSD, but the ath
> device in my ThinkPad required that I update to -current (per Theo's
> suggestion). After that, I haven't had any problems with joining
> networks or creating them. I just tested setting up a network with the
> ThinkPad and it worked fine. I last updated Sunday, so I imagine it
> still works.
>
I upgraded to Current:
OpenBSD 3.7-current (GENERIC) #214: Thu Jun 30 11:43:53 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC"
586-class) 267 MHz
cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
cpu0: TSC disabled
real mem = 133804032 (130668K)
avail mem = 115535872 (112828K)
But still, no wireless network and I now get this:
# wicontrol ath0
wicontrol: SIOCGWAVELAN (0xfd0b): Invalid argument
With 3.7 I got no error.
--
Jonathan Weiss
[EMAIL PROTECTED]
http://blog.innerewut.de
> Steve Fettig
>
Greets,
Jonathan
---------------------------
OpenBSD 3.7-current (GENERIC) #214: Thu Jun 30 11:43:53 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC"
586-class) 267 MHz
cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
cpu0: TSC disabled
real mem = 133804032 (130668K)
avail mem = 115535872 (112828K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(fa) BIOS, date 05/02/05, BIOS32 rev. 0 @ 0xfc5f2
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xe0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Cyrix GXm PCI" rev 0x00
ath0 at pci0 dev 13 function 0 "Atheros AR5212" rev 0x01: irq 12
ath0: AR5212 5.9 phy 4.3 rf5112 3.6, FCC1A, address 00:0b:6b:35:b0:1b
sis0 at pci0 dev 14 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, irq
10, address 00:0d:b9:01:92:d0
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 15 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, irq
9, address 00:0d:b9:01:92:d1
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci0 dev 16 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, irq
11, address 00:0d:b9:01:92:d2
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
gscpcib0 at pci0 dev 18 function 0 "NS SC1100 ISA" rev 0x00
gpio0 at gscpcib0: 64 pins
"NS SC1100 SMI/ACPI" rev 0x00 at pci0 dev 18 function 1 not configured
pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG CF/ATA>
wd0: 1-sector PIO, LBA, 497MB, 1018080 sectors
wd0(pciide0:0:0): using PIO mode 4
"NS SCx200 AUDIO" rev 0x00 at pci0 dev 18 function 3 not configured
geodesc0 at pci0 dev 18 function 5 "NS SC1100 X-Bus" rev 0x00: iid 6
revision 3 wdstatus 0
ohci0 at pci0 dev 19 function 0 "Compaq USB OpenHost" rev 0x08: irq 9,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Compaq OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
isa0 at gscpcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
gscsio0 at isa0 port 0x2e/2: SC1100 SIO rev 1: ACB1 ACB2
iic0 at gscsio0
iic1 at gscsio0
lmtemp0 at iic1 addr 0x48: LM77
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
biomask e3ef netmask ffef ttymask ffef
pctr: no performance counters in CPU
nvram: invalid checksum
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
clock: unknown CMOS layout
