>From the em driver:
The em driver provides support for PCI Gigabit Ethernet adapters
based on
the Intel 82540, 82541ER, 82541PI, 82542, 82543, 82544, 82545,
82546,
82546EB, 82546GB and 82547 Ethernet controller chips.
...
The card is an Intel Pro 1000MT DP on a PCI-Express riser with a 82546GB
chipset, it does detect them as em0 and em1, but it fails when it tries
to initalize them. (Full dmesg below:)
ppb2 at pci1 dev 0 function 2 "Intel IOP331 Channel 1" rev 0x06
pci3 at ppb2 bus 3
ppb3 at pci0 dev 4 function 0 "Intel E7710 MCH PCIE" rev 0x09
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 vendor "Intel", unknown product 0x0340 rev
0x09
pci5 at ppb4 bus 5
em0 at pci5 dev 4 function 0 "Intel PRO/1000MT DP (82546GB)" rev
0x03em0: Unknown MAC Type
: irq 11em0: The EEPROM Checksum Is Not Valid
em0: Unable to initialize the hardware
em1 at pci5 dev 4 function 1 "Intel PRO/1000MT DP (82546GB)" rev
0x03em1: Unknown MAC Type
: irq 3em1: The EEPROM Checksum Is Not Valid
em1: Unable to initialize the hardware
Any ideas have to get around this?
CH
OpenBSD 3.7 (GENERIC) #31: Sun Mar 20 00:42:28 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1073086464 (1047936K)
avail mem = 909189120 (887880K)
using 22937 buffers containing 107515904 bytes (104996K) of memory
mainbus0 (root) cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Xeon(TM) CPU 3.00GHz, 2993.08 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG
cpu0: 1MB 64b/line 8-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0
function 0 "Intel E7710 SMCH" rev 0x09 ppb0 at pci0 dev 2 function 0
"Intel E7710 MCH PCIE" rev 0x09
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel IOP331 Channel 0" rev 0x06
pci2 at ppb1 bus 2
ami0 at pci2 dev 14 function 0 "Dell PERC 4e/Di" rev 0x06: irq 7 Dell
16c/32b
ami0: FW 516A, BIOS vH418, 256MB RAM
ami0: 1 channels, 0 FC loops, 1 logical drives scsibus0 at ami0: 40
targets sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2
0/direct fixed
sd0: 69880MB, 8908 cyl, 255 head, 63 sec, 512 bytes/sec, 143114240 sec
total
ppb2 at pci1 dev 0 function 2 "Intel IOP331 Channel 1" rev 0x06
pci3 at ppb2 bus 3
ppb3 at pci0 dev 4 function 0 "Intel E7710 MCH PCIE" rev 0x09
pci4 at ppb3 bus 4
ppb4 at pci0 dev 5 function 0 "Intel E7710 MCH PCIE" rev 0x09
pci5 at ppb4 bus 5
ppb5 at pci5 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci6 at ppb5 bus 6
em0 at pci6 dev 7 function 0 "Intel PRO/1000MT (82541EI)" rev 0x05: irq
11, address: 00:11:43:e4:bd:b7
ppb6 at pci5 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci7 at ppb6 bus 7
em1 at pci7 dev 8 function 0 "Intel PRO/1000MT (82541EI)" rev 0x05: irq
3, address: 00:11:43:e4:bd:b8
ppb7 at pci0 dev 6 function 0 "Intel E7710 MCH PCIE" rev 0x09
pci8 at ppb7 bus 8
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0 uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 7
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29
function 7 "Intel 82801EB/ER USB" rev 0x02: irq 5
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
ppb8 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci9 at ppb8 bus 9
vga1 at pci9 dev 13 function 0 "ATI Radeon VE QY" rev 0x00 wsdisplay0 at
vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation) "Intel 82801EB/ER
LPC" rev 0x02 at pci0 dev 31 function 0 not configured pciide0 at pci0
dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, DVD-ROM DV-28E-C, D.4E> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0
port 0x60/5 pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0 pcppi0 at isa0 port 0x61 sysbeep0 at pcppi0
uhub4 at uhub3 port 3
uhub4: Dell product 0xa001, class 9/0, rev 2.00/0.00, addr 2
uhub4: multiple transaction translators
uhub4: 2 ports with 2 removable, self powered
dkcsum: sd0 matched BIOS disk 80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
