>> 64bit 360mhz CPU (IIi) >> 128mb RAM >> 1 x 18gb 10krpm >> 2 x integrated NIC >> 1x PCI (which I intend to put a dual port compaq/intel NIC in) > > I have a T1 105, I don't know if it's a problem with my particular > machine or a more general one, but I've tried to use hifn and em in the > PCI slot - cards get detected OK, but don't actually work - I don't > know whether or not it's a hardware problem so haven't looked into it > much (especially as I don't actually need them). Might work for you, > but I'm not sure I'd buy one if you're counting on this unless you can > test it first (you can fairly easily setup a portable computer to allow > you to netboot an OpenBSD bsd.rd if you want to try this out).
I had exactly same problem on two netra T1 105 (with 440Mhz CPU and 512M RAM) but with network cards. I have tried a qfe pci (with 4 hme chips), double fxp cards and single fxp ones. All are correctly detected, but when trying to send a packet to any NIC, packet don't reach networks. Seems that the PCI port on such machine is more or less buggy... /Xavier
