--On 02 June 2005 10:09 -0500, Kevin wrote:
There's a known issue with the Netra under openBSD when using
any PCI NIC having an onboard PCI-PCI bridge.  Most multi-port
NICs (and a few single port) have a PCI-PCI bridge on the card.

Ahh, do you mean pr#3928? Looks like it's not limited to NICs then. The only bridges on my box are onboard (psycho -> simba -> 21150 -> bus containing CMD0646 and slot). But it does look like the exact same problem.

There are some FreeBSD commits which look like they might explain the problem better - <http://lists.freebsd.org/pipermail/cvs-src/2003-May/004212.html> has some fixes for e450, and they have some earlier commits on Nov 7 2002 with a workaround for what looks like maybe nearly the same thing on the T1 105 (also in 2003, they reworked PCI support on OFW sparc64).

I also just found the thread at <http://thread.gmane.org/gmane.os.openbsd.sparc/1057> with a workaround.

OpenBSD 3.7 (GENERIC) #431: Sun Mar 20 14:10:02 MST 2005

[EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC
total memory = 1073741824
avail memory = 970162176
using 6553 buffers containing 53682176 bytes of memory
bootpath: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED],0/[EMAIL 
PROTECTED],0
mainbus0 (root): Netra t1 (UltraSPARC-IIi 440MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 440.047 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b
/l)
psycho0 at mainbus0 addr 0xfffc0000
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 3; PCI bus 0
DVMA map: c0000000 to e0000000
IOTDB: 52e4000 to 5364000
pci0 at psycho0
ppb0 at pci0 dev 1 function 1 "Sun Simba PCI-PCI" rev 0x13
pci1 at ppb0 bus 1
ebus0 at pci1 dev 1 function 0 "Sun PCIO Ebus2" rev 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003,
72f000-72f003
power at ebus0 addr 724000-724003 ipl 37 not configured
SUNW,pll at ebus0 addr 504000-504002 not configured
com0 at ebus0 addr 3803f8-3803ff ipl 28: ns16550a, 16 byte fifo
com0: console
com1 at ebus0 addr 3602f8-3602ff ipl 20: ns16550a, 16 byte fifo
lpt0 at ebus0 addr 340278-340287, 30015c-30015d, 700000-70000f ipl 34: polled fdthree at ebus0 addr 3203f0-3203f7, 706000-70600f, 720000-720003 ipl 39 not con
figured
clock1 at ebus0 addr 0-1fff: mk48t59: hostid 80fa68b2
flashprom at ebus0 addr 0-fffff not configured
watchdog at ebus0 addr 200000-20003f ipl 4 not configured
display7seg at ebus0 addr 200040-200040 not configured
beeper0 at ebus0 addr 722000-722003: can't map register space
flashprom at ebus0 addr 400000-5fffff not configured
flashprom at ebus0 addr 800000-9fffff not configured
i2c at ebus0 addr 600000-600003 ipl 40 not configured
i2c at ebus0 addr 100000-100003 ipl 27 not configured
SUNW,lom at ebus0 addr 400000-400063 not configured
hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: address 08:00:20:fa:68:b2
ukphy0 at hme0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00601d, model 0x000c, rev. 1
hme0: using ivec 3021 for interrupt
siop0 at pci1 dev 2 function 0 "Symbios Logic 53c875" rev 0x03: ivec 20, using 4
K of on-board RAM
scsibus0 at siop0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST318404LSUN18G, 5221> SCSI3 0/direct fi
xed
sd0: 17274MB, 7508 cyl, 19 head, 248 sec, 512 bytes/sec, 35378533 sec total sd1 at scsibus0 targ 1 lun 0: <SEAGATE, ST318305LSUN18G, 0340> SCSI3 0/direct fi
xed
sd1: 17274MB, 7508 cyl, 19 head, 248 sec, 512 bytes/sec, 35378533 sec total hme1 at pci1 dev 3 function 1 "Sun HME" rev 0x01: address 08:00:20:fa:68:b3
ukphy1 at hme1 phy 0: Generic IEEE 802.3u media interface
ukphy1: OUI 0x00601d, model 0x000c, rev. 1
hme1: using ivec 301a for interrupt
ppb1 at pci0 dev 1 function 0 "Sun Simba PCI-PCI" rev 0x13
pci2 at ppb1 bus 2
ppb2 at pci2 dev 1 function 0 "DEC 21150 PCI-PCI" rev 0x06
pci3 at ppb2 bus 3
pciide0 at pci3 dev 14 function 0 "CMD Technology PCI0646" rev 0x03: DMA, channe
l 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 1802 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TOSHIBA, CD-ROM XM-7002Bc, 1111> SCSI0 5/cdrom re
movable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
hifn0 at pci3 dev 15 function 0 "Hifn 7951" rev 0x01: LZS 3DES ARC4 MD5 SHA1 RNG
PK, 128KB sram, ivec 7ca
pcons at mainbus0 not configured
No counter-timer -- using %tick at 440MHz as system clock.
root on sd0a
siop0: target 0 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers
rootdev=0x700 rrootdev=0x1100 rawdev=0x1102
siop0: target 1 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers
Automatic boot in progress: starting file system checks.

Reply via email to