Base Box2 With 2x5 dbi Antenna -One unit is a simple effective solution. Sunny
On Wed, Oct 19, 2016 at 5:53 PM, Sam Tetherow via Mikrotik-users < [email protected]> wrote: > I have been having really good luck with the TP-Link powerline adapters > for this type of lan extension. > > Been using the TP-LINK TL-AV200s. I've run into issues with smart GFI > outlets in the garage on higher end homes but in the house haven't had any > issues. > > On 10/19/2016 04:46 PM, Tim Kerns via Mikrotik-users wrote: > > I agree to the Cat5, but when trying to cover a large home, running Cat5 > is not usually easy to do... > > So I want to explore using 2 or more 951’s to cover using the WDS. > > Problem is there are several examples on doing this on the Web, but none > of them are complete or assume you know what they are referring to. > I have it working in a test bed, but not sure it is correct as I’m getting > occasionally some errors about server not found or no Internet connection. > > Do you have a script or HowTo? > > Thanks > > *From:* Dennis Burgess via Mikrotik-users > *Sent:* Wednesday, October 19, 2016 2:30 PM > *To:* Scott Reed ; Mikrotik Users > *Subject:* Re: [Mikrotik Users] How to for setting WDS between 2 951's > > > Cat5 between them SOOOO much better vs loosing ½ of your performance. > > > > > > *Dennis Burgess** –** Network Solution Engineer – Consultant * > > MikroTik Certified Trainer/Consultant > <http://www.linktechs.net/productcart/pc/viewcontent.asp?idpage=5> – > MTCNA, MTCRE, MTCWE, MTCTCE, MTCINE > > > > For Wireless Hardware/Routers visit www.linktechs.net > > Radio Frequiency Coverages: www.towercoverage.com > > Office: 314-735-0270 > > E-Mail: [email protected] > > > > *From:* [email protected] [mailto:mikrotik-users- > [email protected] <[email protected]>] *On Behalf Of *Scott > Reed via Mikrotik-users > *Sent:* Wednesday, October 19, 2016 3:25 PM > *To:* Tim Kerns <[email protected]> <[email protected]>; Mikrotik Users > <[email protected]> <[email protected]> > *Subject:* Re: [Mikrotik Users] How to for setting WDS between 2 951's > > > > Interface->wireless->WDS and set to dynamic will probably get you there. > > > > On 10/18/2016 7:52 PM, Tim Kerns via Mikrotik-users wrote: > > Looking for a “howto” to enable wireless WDS between 2 951’s.... other > wise will need to run cat5 between them > > > > Thanks > > > > > > > _______________________________________________ > > Mikrotik-users mailing list > > [email protected] > > http://lists.wispa.org/mailman/listinfo/mikrotik-users > > > > ------------------------------ > _______________________________________________ > Mikrotik-users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/mikrotik-users > > > _______________________________________________ > Mikrotik-users mailing > [email protected]http://lists.wispa.org/mailman/listinfo/mikrotik-users > > > > _______________________________________________ > Mikrotik-users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/mikrotik-users > > -- *Saurabh Nagpal* Email : [email protected] *MULTILINK SOLUTIONS INC* 7577 Central Parke Blvd. Suites 304, 306 Mason, OH. 45040, USA Phone: +513-800-1290 Email: For General Inquiry: [email protected] For Sales Inquiry : [email protected] Website : www.multilink.us
_______________________________________________ Mikrotik-users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/mikrotik-users
