Hotspot IP bypass, hotspot automatic mac authentication, EoIP tunnel, VLAN just to mention a couple of ways to do it.
/ Eje Gustafsson ---------------------------------------- From: "ralph via Mikrotik-users" <[email protected]> Sent: Thursday, September 22, 2016 4:14 PM To: "Mikrotik Users" <[email protected]> Subject: [Mikrotik Users] Advice needed- Hotspot Behind Hotspot The subject is the best I could do for a description, but let me really describe it. I have a System running in an RV park, with a Cable Modem feeding a couple dozen Aps. I use Mikrotik hotspot with an external service handling AAA and payment. It is on a static IP from a cable modem and I have plenty of spare statics for future use. I have a new customer that is a marina a couple of miles away. I have already shot a PtP link over there which works well. Unfortunately the AP for this shot is fed, not from the cable modem, but from a point behind the RV park hotspot this point in itself is fed from the cable modem by a couple of PtP links in between. Operating in transparent bridge mode, so that isn't an issue.. So the users at the marina get the login page, etc for the RV park and basically look like they are RV park residents. I'm not using VLANS in the network. Problem is is that I need the users at the Marina not to get the Hotspot system for the RV Park. Instead they need their own. I can put another MT router/hotspot out at the marina but the problem is this feed that is already behind a hotspot. How can I let one of the external static IPs from the cable modem pass unrestricted out to that AP that shoots to the Marina without having the RV hotspot get in the way? It sounds like a job for VLANS but that would mean that I'd have to VLAN the entire network at both places and somehow get the external IP for the marina to go around the first hotspot somehow. Can anyone offer any advice how to do this? Hopefully this simple diagram comes through and isn't messed up What I have: Modem-MT CCR Router---<PtP AP> <PtP CPE> ---(RV Park Aps) | + <PtP AP to Marina> <PtP CPE at Marina> --- (Marina Aps) What I want: Modem-MT CCR Router---<PtP AP> <PtP CPE> ---(RV Park Aps) | + <PtP AP to Marina> <PtP CPE at Marina> --- MT CCR Router---- (Marina Aps) Thanks Ralph
_______________________________________________ Mikrotik-users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/mikrotik-users
