Alex you crack me up!
On 9/22/2016 5:22 PM, alex phillips via Mikrotik-users wrote:
I think that will make you go blind.
/*Alex Phillips*/
CEO and General Manager
RBNS.net
HighSpeedLink.net
*WISPA.org Board of Directors ** (2011-2017)*
*WISPA President (2015-2017)*
*540-908-3993*
On Thu, Sep 22, 2016 at 5:14 PM, ralph via Mikrotik-users
<[email protected] <mailto:[email protected]>> wrote:
The subject is the best I could do for a description, but let me
really describe it.
I have a System running in an RV park, with a Cable Modem feeding
a couple dozen Aps. I use Mikrotik hotspot with an external
service handling AAA and payment. It is on a static IP from a
cable modem and I have plenty of spare statics for future use.
I have a new customer that is a marina a couple of miles away. I
have already shot a PtP link over there which works well.
Unfortunately the AP for this shot is fed, not from the cable
modem, but from a point behind the RV park hotspot this point in
itself is fed from the cable modem by a couple of PtP links in
between. Operating in transparent bridge mode, so that isn’t an
issue.. So the users at the marina get the login page, etc for
the RV park and basically look like they are RV park residents.
I’m not using VLANS in the network.
Problem is is that I need the users at the Marina not to get the
Hotspot system for the RV Park. Instead they need their own. I
can put another MT router/hotspot out at the marina but the
problem is this feed that is already behind a hotspot. How can I
let one of the external static IPs from the cable modem pass
unrestricted out to that AP that shoots to the Marina without
having the RV hotspot get in the way? It sounds like a job for
VLANS but that would mean that I’d have to VLAN the entire network
at both places and somehow get the external IP for the marina to
go around the first hotspot somehow.
Can anyone offer any advice how to do this?
Hopefully this simple diagram comes through and isn’t messed up
What I have:
Modem—MT CCR Router---<PtP AP> <PtP CPE> ---(RV Park Aps)
|
+ <PtP AP to Marina> <PtP CPE at Marina> --- (Marina Aps)
What I want:
Modem—MT CCR Router---<PtP AP> <PtP CPE> ---(RV Park Aps)
|
+ <PtP AP to Marina> <PtP CPE at Marina> --- MT CCR Router----
(Marina Aps)
Thanks
Ralph
_______________________________________________
Mikrotik-users mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/mikrotik-users
<http://lists.wispa.org/mailman/listinfo/mikrotik-users>
_______________________________________________
Mikrotik-users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/mikrotik-users
--
Jeff Evans, Managing Member
PennWisp, LLC
www.pennwisp.com
_______________________________________________
Mikrotik-users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/mikrotik-users
