On Thu, Jun 5, 2014 at 2:39 PM, Bruno Jimenez <brunoji...@gmail.com> wrote:
> On Tue, 2014-06-03 at 08:55 -0400, Alex Deucher wrote:
>> On Mon, Jun 2, 2014 at 7:34 PM, Bruno Jimenez <brunoji...@gmail.com> wrote:
>> > On Mon, 2014-06-02 at 16:16 -0400, Alex Deucher wrote:
>> >> On Sat, May 31, 2014 at 7:13 AM, Bruno Jimenez <brunoji...@gmail.com>
>> >> wrote:
>> >> > On Fri, 2014-05-30 at 19:33 -0400, Alex Deucher wrote:
>> >> >> On Fri, May 30, 2014 at 11:31 AM, Bruno Jiménez <brunoji...@gmail.com>
>> >> >> wrote:
>> >> >> > The data has been extracted from:
>> >> >> > AMD Accelerated Parallel Processing OpenCL Programming Guide (rev
>> >> >> > 2.7)
>> >> >> > Appendix D: Device Parameters
>> >> >>
>> >> >> You should add a query for the number of compute units to the
>> >> >> RADEON_INFO ioctl and then just ask the kernel how many CUs/SIMDs the
>> >> >> hw has. This will properly handle all boards (harvest, etc.) since we
>> >> >> can read the actual number of CUs off the GPU.
>> >> >>
>> >> >> Alex
>> >> >
>> >> > Hi,
>> >> >
>> >> > At first I tried to do so (as for the maximum clock frequency), but I
>> >> > couldn't find how to query that value, nor many docs about what I could
>> >> > ask the kernel for.
>> >> >
>> >> > I think I have found now the appropiate docs, and I will try again to
>> >> > query the kernel later.
>> >>
>> >> You'd need to add a new query. It doesn't look like we expose this
>> >> yet. The attached untested patch should mostly do the trick.
>> >>
>> >> Alex
>> >>
>> >
>> > Honestly, I would have never ever been able to come up with this. I
>> > tried quering for MAX_PIPES, MAX_SE and MAX_SH_PER_SE (only for SI), and
>> > multiplying them together. And it did work for my little CEDAR, but
>> > getting a 2 it's easy. And looking at what would return for other cards
>> > it didn't look so well.
>> >
>> > Should I try this patch on top of kernel 3.14.4? or should I use other
>> > version?
>
> With a couple of changes, it applied cleanly to 3.14.5 (Arch's stable).
> And with the attached patch as #2 for my series I can get the correct
> number of compute units for my CEDAR.
>
> But I don't know how or where I should add this new query param, given
> that it hasn't been added to the kernel yet. For now I have hardcoded
> the '0x20'.
>
Excellent. Glad it's working. I'll add it to my queue.
Alex
> Thanks for all Alex!
> Bruno
>
>
>> It was against Dave's drm-next, but it may apply to 3.14 as well.
>>
>> Alex
>>
>> >
>> > Thanks in advance and sorry for any inconvenience.
>> > Bruno
>> >
>> >>
>> >> >
>> >> > Sorry for any inconvenience.
>> >> > Bruno
>> >> >
>> >> >>
>> >> >> > ---
>> >> >> > src/gallium/drivers/radeon/r600_pipe_common.c | 90
>> >> >> > +++++++++++++++++++++++++++
>> >> >> > 1 file changed, 90 insertions(+)
>> >> >> >
>> >> >> > diff --git a/src/gallium/drivers/radeon/r600_pipe_common.c
>> >> >> > b/src/gallium/drivers/radeon/r600_pipe_common.c
>> >> >> > index 70c4d1a..c4abacd 100644
>> >> >> > --- a/src/gallium/drivers/radeon/r600_pipe_common.c
>> >> >> > +++ b/src/gallium/drivers/radeon/r600_pipe_common.c
>> >> >> > @@ -422,6 +422,89 @@ const char *r600_get_llvm_processor_name(enum
>> >> >> > radeon_family family)
>> >> >> > }
>> >> >> > }
>> >> >> >
>> >> >> > +static uint32_t radeon_max_compute_units(enum radeon_family family)
>> >> >> > +{
>> >> >> > + switch (family) {
>> >> >> > + case CHIP_CEDAR:
>> >> >> > + return 2;
>> >> >> > +
>> >> >> > + /* Redwood PRO2: 4
>> >> >> > + * Redwood PRO: 5
>> >> >> > + * Redwood XT: 5 */
>> >> >> > + case CHIP_REDWOOD:
>> >> >> > + return 4;
>> >> >> > +
>> >> >> > + /* Juniper LE: 9
>> >> >> > + * Juniper XT: 10 */
>> >> >> > + case CHIP_JUNIPER:
>> >> >> > + return 9;
>> >> >> > +
>> >> >> > + /* Cypress LE: 14
>> >> >> > + * Cypress PRO: 18
>> >> >> > + * Cypress XT: 20 */
>> >> >> > + case CHIP_CYPRESS:
>> >> >> > + return 14;
>> >> >> > +
>> >> >> > + case CHIP_HEMLOCK:
>> >> >> > + return 40;
>> >> >> > +
>> >> >> > + /* XXX: is Zacate really equal to Ontario?
>> >> >> > + * Zacate E-350: 2
>> >> >> > + * Zacate E-240: 2
>> >> >> > + * Ontario C-50: 2
>> >> >> > + * Ontario C-30: 2 */
>> >> >> > + case CHIP_PALM:
>> >> >> > + return 2;
>> >> >> > +
>> >> >> > + /* Caicos: 2
>> >> >> > + * Seymour LP: 2
>> >> >> > + * Seymour PRO: 2
>> >> >> > + * Seymour XT: 2
>> >> >> > + * Seymour XTX: 2 */
>> >> >> > + case CHIP_CAICOS:
>> >> >> > + return 2;
>> >> >> > +
>> >> >> > + /* Turks PRO: 6
>> >> >> > + * Turks XT: 6
>> >> >> > + * Whistler LP: 6
>> >> >> > + * Whistler PRO: 6
>> >> >> > + * Whistler XT: 6 */
>> >> >> > + case CHIP_TURKS:
>> >> >> > + return 6;
>> >> >> > +
>> >> >> > + /* Barts LE: 10
>> >> >> > + * Barts PRO: 12
>> >> >> > + * Barts XT: 14
>> >> >> > + * Blackcomb PRO: 12 */
>> >> >> > + case CHIP_BARTS:
>> >> >> > + return 10;
>> >> >> > +
>> >> >> > + /* Cayman PRO: 22
>> >> >> > + * Cayman XT: 24
>> >> >> > + * Cayman Gemini: 48 */
>> >> >> > + case CHIP_CAYMAN:
>> >> >> > + return 22;
>> >> >> > +
>> >> >> > + /* Verde PRO: 8
>> >> >> > + * Verde XT: 10 */
>> >> >> > + case CHIP_VERDE:
>> >> >> > + return 8;
>> >> >> > +
>> >> >> > + /* Pitcairn PRO: 16
>> >> >> > + * Pitcairn XT: 20 */
>> >> >> > + case CHIP_PITCAIRN:
>> >> >> > + return 16;
>> >> >> > +
>> >> >> > + /* Tahiti PRO: 28
>> >> >> > + * Tahiti XT: 32 */
>> >> >> > + case CHIP_TAHITI:
>> >> >> > + return 28;
>> >> >> > +
>> >> >> > + default:
>> >> >> > + return 1;
>> >> >> > + }
>> >> >> > +}
>> >> >> > +
>> >> >> > static int r600_get_compute_param(struct pipe_screen *screen,
>> >> >> > enum pipe_compute_cap param,
>> >> >> > void *ret)
>> >> >> > @@ -519,6 +602,13 @@ static int r600_get_compute_param(struct
>> >> >> > pipe_screen *screen,
>> >> >> > }
>> >> >> > return sizeof(uint32_t);
>> >> >> >
>> >> >> > + case PIPE_COMPUTE_CAP_MAX_COMPUTE_UNITS:
>> >> >> > + if (ret) {
>> >> >> > + uint32_t *max_compute_units = ret;
>> >> >> > + *max_compute_units =
>> >> >> > radeon_max_compute_units(rscreen->family);
>> >> >> > + }
>> >> >> > + return sizeof(uint32_t);
>> >> >> > +
>> >> >> > default:
>> >> >> > fprintf(stderr, "unknown PIPE_COMPUTE_CAP %d\n",
>> >> >> > param);
>> >> >> > return 0;
>> >> >> > --
>> >> >> > 1.9.3
>> >> >> >
>> >> >> > _______________________________________________
>> >> >> > mesa-dev mailing list
>> >> >> > mesa-dev@lists.freedesktop.org
>> >> >> > http://lists.freedesktop.org/mailman/listinfo/mesa-dev
>> >> >
>> >> >
>> >
>> >
>
_______________________________________________
mesa-dev mailing list
mesa-dev@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/mesa-dev
