Hey Everyone,
I started a small project called gputool to help me debug issues on AMD
platforms. I think it may be useful to other driver devs, so I've made
it available on github:
https://github.com/lostgoat/gputool
Mainly I wanted something that could read and decode registers, so that
is what is currently supported.
Example operation:
|gputool> read CB_HW_CONTROL CB_HW_CONTROL: 0x7208 FORCE_NEEDS_DST: 0x0
DISABLE_BLEND_OPT_WHEN_DISABLED_SRCALPHA_IS_USED: 0x0
DISABLE_BLEND_OPT_DISCARD_PIXEL: 0x0 DISABLE_BLEND_OPT_DONT_RD_DST: 0x0
PRIORITIZE_FC_EVICT_OVER_FOP_RD_ON_BANK_CONFLICT: 0x0
DISABLE_FULL_WRITE_MASK: 0x0 DISABLE_BLEND_OPT_RESULT_EQ_DEST: 0x0
DISABLE_INTNORM_LE11BPC_CLAMPING: 0x0
DISABLE_PIXEL_IN_QUAD_FIX_FOR_LINEAR_SURFACE: 0x0
ALLOW_MRT_WITH_DUAL_SOURCE: 0x0 DISABLE_CC_IB_SERIALIZER_STATE_OPT: 0x0
PRIORITIZE_FC_WR_OVER_FC_RD_ON_CMASK_CONFLICT: 0x0 FORCE_ALWAYS_TOGGLE:
0x0 FC_CACHE_EVICT_POINT: 0x8 CC_CACHE_EVICT_POINT: 0x7
DISABLE_RESOLVE_OPT_FOR_SINGLE_FRAG: 0x0 DISABLE_BLEND_OPT_BYPASS: 0x0
CM_CACHE_EVICT_POINT: 0x8 ||gputool> read PA_SC_RASTER_CONFIG PA_SC_RASTER_CONFIG: 0x16000012
RB_XSEL: 0x0 SC_YSEL: 0x0 SC_MAP: 0x0 SC_XSEL: 0x0 SE_YSEL: 0x1 SE_XSEL:
0x1 PKR_YSEL: 0x0 RB_YSEL: 0x0 PKR_XSEL: 0x0 RB_XSEL2: 0x1 PKR_XSEL2:
0x0 SE_MAP: 0x2 RB_MAP_PKR0: 0x2 RB_MAP_PKR1: 0x0 PKR_MAP: 0x0|
One of the other things I'm considering adding is register write
support, and also dumping textures from vram for inspection.
Regards,
Andres
||||
||
_______________________________________________
mesa-dev mailing list
mesa-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/mesa-dev
