Elizabeth, You are awesome! This is the answer we have looked for on and off for 2+ years. I knew about the "print blank label between patients" prompt and we have played with that in the past to no avail.
Thank you very much! Have a fabulous day! -- Bill Palmer Information Systems Financial Coordinator Mid-Columbia Medical Center The Dalles, OR 97058 541-296-7417 >>> On 6/18/2007 at 6:30 am, in message <[EMAIL PROTECTED]>, "Elizabeth Ronning" <[EMAIL PROTECTED]> wrote: > Bill- The dip switches on the back of the printer are different from > just the regular prodigy. If we remember correctly, dip switch 2 and 5 > must be turned on. 2 is the baud rate and 5 is what mode it is in. If > they are not on, it will cause a blank label to print in between the > labels. Been there done that. We now have datamax printers, but did have > the prodigy and prodigy plus printers. Just something else to try. > > Thanks- > Elizabeth Ronning > Good Shepherd Medical Center > > -----Original Message----- > From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf > Of Bill Palmer > Sent: Wednesday, June 13, 2007 11:24 AM > To: [email protected] > Subject: [MEDITECH-L] Label Waste > > When labels print in the lab the printer skips a label in between each > set causing a lot of waste. We are Magic 5.5.2 using Prodigy Plus label > printers. Has anyone else solved this problem? > > Thanks! =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*= To subscribe or unsubscribe to the meditech-l, visit http://mtusers.com/mailman/listinfo/meditech-l_mtusers.com To check the status of the meditech-l, visit MTUsers.NET For help, email [EMAIL PROTECTED] Please visit and add information to the MTUsers WikiPedia at MTUsers.NET/mwiki ______________________________________ meditech-l mailing list [email protected] http://mtusers.com/mailman/listinfo/meditech-l_mtusers.com
