>From :rohan pathak <[EMAIL PROTECTED]> To : [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED] Subject : Regarding Installation of specialix io8 port card(ISA) Date : Sat, 1 Dec 2001 10:43:49 -0800 (PST)
hello I have done the following thing in order to install specialix io8 port card(ISA) on redhat hat 6.2. but... root# insmod /lib/modules/linux2.2.14-12/misc/specialix.o iobase=0x100 irq=11 Made an entry to etc/liloconf like this apend "specialix=0x100 irq=11" made 8 device file in /dev like this mknod /dev/ttyW(from 0 to 7) c 75(major) (file number as minor) made entry to /etc/inittab as a:23:respawn: /sbin/getty ttyW(0-7) DT9600 vt220 but doing all this i am not getting the login or any echo message to terminal.I think cable connection are ok because prior to this i have unixware2.1 on the same and working fine.One more problem is there that when system is reboot each time i have to install the specialix driver by insmod.By using setserial -ga /dev/ttyW* it shows the uart type cirrus and baud_base 785678 like this. -- _______________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup 1 cent a minute calls anywhere in the U.S.! http://www.getpennytalk.com/cgi-bin/adforward.cgi?p_key=RG9853KJ&url=http://www.getpennytalk.com
