Hi Buddy and All, Buddy, your instructions did work. The Hovercam did show up in the device list in the DocuScan Plus window. I hadn't looked until I read your message because I figured that if the camera didn't show up in the Image Capture app, as the documentation stated that it should, I should stop there and not become more frustrated. But, now I am up and running. As for Chris' message about getting the blank page message, I was also getting that until I decided that although I was trying this during daytime, perhaps there wasn't enough light. So, I turned on the light on the camera and that solved the problem. So, try that, or use a light source in your room and see if that helps. Myrna
On 6/1/11, Buddy Brannan <bu...@brannan.name> wrote: > Hi, > > It actually won't show up in the image capture utility, but it should still > show in Docuscan Plus when you open it and select a scanning mode. If you go > into new document, then simple scan (for instance, could as easily be batch > scan), do you get a list of available devices? The Hovercam should be one of > these. > -- > Buddy Brannan, KB5ELV - Erie, PA > Phone: (814) 860-3194 or 888-75-BUDDY > > > > On Jun 1, 2011, at 1:09 PM, Myrna Votta wrote: > >> Hi All, >> I just purchased the HoverCam to use with DocuScan Plus on the Mac. >> According to the documentation, To varify that it was properly >> connected, I opened Image Capture, but I received the message that >> there was no camera nor scanner connected. On the advice of an >> acquaintance, I checked in system profile, under USB, and the camera >> was listed. On the advice of another friend, I repaired permissions, >> but that didn't help. I know that the camera is fine because I tested >> it on a PC running Windows 7 & it was recognized immediately and >> worked with DocuScan Plus. According to the DocuScan Plus >> Documentation, no software needs to be installed in order for the >> camera to work with the Mac. I have seen a couple of messages from >> others on this list who purchased the camera and I was wondering if >> any of you have gotten it to work with the Mac. "Even if you don't >> have the cmera, but you have any suggestions for me, I will appreciate >> any ideas. >> Myrna >> >> -- >> You received this message because you are subscribed to the Google Groups >> "MacVisionaries" group. >> To post to this group, send email to macvisionaries@googlegroups.com. >> To unsubscribe from this group, send email to >> macvisionaries+unsubscr...@googlegroups.com. >> For more options, visit this group at >> http://groups.google.com/group/macvisionaries?hl=en. >> > > -- > You received this message because you are subscribed to the Google Groups > "MacVisionaries" group. > To post to this group, send email to macvisionaries@googlegroups.com. > To unsubscribe from this group, send email to > macvisionaries+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/macvisionaries?hl=en. > > -- You received this message because you are subscribed to the Google Groups "MacVisionaries" group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
