Caitlin, Here are the steps for the Fusion-only way, based on instructions I’ve written previously to the list. It’s been a while since I’ve used this method, but I think these instructions still apply.
Press CMD+COMMA to open preferences from within VMWare, and select the “keyboard and mouse” section. Be sure you are editing the right profile, then choose the “key mappings” tab and hit the add button. Once you enter the dialog to add a new key mapping, you can do a couple of things. It’s best to navigate the dialog with VO+LEFT and VO+RIGHT rather than the TAB KEY, otherwise VMWare could interpret the TAB KEY as the key you want to remap. The two controls which VoiceOver calls combo boxes can actually be typed into as well. So, as an example, let’s say you want to remap the GRAVE ACCENT KEY to act as an INSERT KEY. That’s far from ideal, of course, but since it is just one key above the caps lock key, which is normally the screen reading key, this is an okay compromise if you don’t want to use other third-party software. in the first combo box that asks what key you want to remap, if you just push the GRAVE ACCENT on the keyboard, it should take. In the second combo box, use VO+SPACE to expand the list, find INSERT by using VO+LEFT and RIGHT, move the mouse pointer there with VO+COMMAND+F5, then perform a click with VO+SHIFT+SPACE. That’s it, your choice should be saved. Stop interacting once, find the OK button and activate it, and you should be done. Ensure the “enable key mappings” checkbox is checked as well on that page, then close out of preferences with CMD+W. If this is still not working for you, start up the virtual machine where you’re having problems and hit CMD+E to open the preferences window for the virtual machine. Activate the keyboard and mouse button, and make sure the same profile you just edited in the previous step is selected. The insert key is generally not treated exactly the same way as the caps lock key by Windows screen readers, leading to possibly undesirable key mappings. You might be able to install SharpKeys and remap insert to caps lock, but I’ve not had success trying this. I hope this helps. Grant On Mar 26, 2015, at 5:41 AM, Caitlyn Furness <caitlyn.furn...@gmail.com> wrote: I’d like the steps in remapping the insert key within fusion using just the fusion way, please. I thought I had done this, but it doesn’t seem to be sticking. thanks, Caitlyn > On Mar 25, 2015, at 10:33 PM, Phil Halton <philh...@gmail.com > <mailto:philh...@gmail.com>> wrote: > > possibly the easiest way around the caps lock problem is to set nvda, or > JAWS, to use the insert key as its modifier. Then in fusion key remapping > preferences, you can set a key like the grave accent to instead produce an > insert key. Then, essentially, the grave accent key which is just above the > tab key will serve as the nvda modifier key. > This method does not require the use of any other software like sharpkeys and > the like. > Personally, I use sharpkeys to set the grave accent key to act as the caps > lock and have JAWS set to use the caps lock as modifier. However, I have used > the fusion insert key method as well with equally good, if simpler, results. > Remapping the insert key in fusion settings is a bit tricky, but can be done > without too much trouble. If you go that route, I or someone else can walk > you through the process. > >> On Mar 25, 2015, at 4:30 PM, Andrew Lamanche <ioani...@me.com >> <mailto:ioani...@me.com>> wrote: >> >> Hi Bill again, >> >> I've found the post from Grant - one of the list members - outlining the >> steps you need to take to use capslock key successfully in fusion on a mac >> computer. I assume you use a mac computer although having read your message >> again, I see you say "windows" keyboard. So I'm not sure whether gRant's >> message is going to relevant. I'm pasting his message in quotes below. >> Maybe you could contact him via the list if what he says will not work or >> you need further help. I know it's a headache. Look for the quoted message >> below my signature. >> >> Andrew >> "Hello all, >> >> I am very happy to report that I have found a solution to give Windows >> complete control of the CAPS LOCK KEY while using it in a VMWare virtual >> machine. I now have full use of my CAPS LOCK KEY while using Windows in >> VMWare. For example, with JAWS, I can use it as my JAWS KEY, and I can press >> it twice quickly to toggle CAPS LOCK on or off. While I was willing to >> settle for using another key like the GRAVE ACCENT KEY as my screen reading >> key, or even to map my CAPS LOCK KEY to an INSERT KEY, I wanted to see if I >> could find a solution that would allow the CAPS LOCK KEY truly to be passed >> through to Windows. The reason is primarily because screen readers don't >> always treat the CAPS LOCK KEY identically to how the INSERT KEY is treated, >> even while using a dedicated laptop layout. In JAWS, for example, there are >> many key mappings which are different, such as INSERT+8 (open the keyboard >> manager) as opposed to CAPS LOCK+8 (perform a left mouse click). While JAWS >> key mappings can be changed, and while I love using VMWare Fusion and find >> it very efficient, I really wanted my keyboard to work in a more familiar >> manner. >> >> If anybody is wondering whether the CAPS LOCK KEY can be passed through >> directly, the answer is yes, and here is my solution. The short version is >> that in Mac OS X, we’ll be mapping the CAPS LOCK KEY to something entirely >> different. Then in the VM, we’ll install SharpKeys and map that different >> key back to CAPS LOCK. While this sounds a little crude, it’s the best >> solution I’ve come up with thus far and really isn’t too complicated to set >> up if you know your way around Mac OS X. The irony is that while you have >> this configured, you won’t be able to use CAPS LOCK within Mac OS X itself. >> It will only work when working with your virtual machine. You can select >> text then choose “Make upper case” or “Make lower case” to compensate for >> this. These options are located in the menu bar under Edit > Transformations. >> >> 1. Open up System Preferences. Select the Keyboard button, then the Modifier >> keys button. Change CAPS LOCK to “no action” then hit OK and exit out of >> System Preferences. >> >> 2. Download and install Seil from https://pqrs.org/osx/karabiner/seil.html >> <https://pqrs.org/osx/karabiner/seil.html>. It is a small app that lets you >> customize the functionality of the CAPS LOCK KEY as well as some other, >> international, keys. I believe this software is reputable, but I definitely >> understand and share the hesitation that many will feel about installing an >> app from outside the App Store that you may never have heard of. >> >> 3. Once installed, open the Seil app from your applications folder. You can >> navigate through this app by tabbing around. Find the tree of settings. At >> the top you will see text that says, “expand tree, then change settings and >> change key codes”. Arrow down and the first group within the tree view >> should be “change the CAPS LOCK KEY”. Expand with a RIGHT ARROW then DOWN >> ARROW to the first and only setting you need to change, “change the CAPS >> LOCK KEY”. Reassign the caps lock key to something else. I assigned it to >> key code 110. This is the "super key" in Linux or the "applications key" in >> Windows. Since my Mac doesn’t have this key anyway, this shouldn’t cause any >> other key conflicts and I think should be a safe bet. Tab to the checkbox >> that indicates you want this setting to be applied and check it, then TAB to >> the edit box and enter the appropriate keycode, 110 in my case. You can now >> close the window with CMD+W. >> >> 4. Now, whenever you press the CAPS LOCK key in Windows it will open up a >> context menu. This is not what we want, so go ahead and install SharpKeys to >> your virtual machine from https://sharpkeys.codeplex.com >> <https://sharpkeys.codeplex.com/>. It is very easy to navigate. Open it up. >> Reassign "special@_Applications Key" to caps lock, and hit the write to >> registry button. Then reboot the VM or log out and back in. Voila, you now >> have full use of the CAPS LOCK KEY within Windows. >> >> 5. You should easily be able to undo this change in Seil if desired. >> >> Sorry that this was so long winded but I wanted to provide a reasonable >> amount of detail for those interested. It may well be that somebody else has >> a much more brilliant solution than mine. >> >> Cheers. >> >> Grant >> >> >> >> Grant" >> >> >>> On 25 Mar 2015, at 16:00, Bill Holton <bill32...@gmail.com >>> <mailto:bill32...@gmail.com>> wrote: >>> >>> Hi. >>> Running Windows 7 in Fusion with a Windows keyboard, I cannot seem to use >>> the caps lock key as an NVDA modifier. I have the setting enabled. Does >>> NVDA not see the caps lock key in a Fusion Window? Thanks. >>> Bill >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "MacVisionaries" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to macvisionaries+unsubscr...@googlegroups.com >>> <mailto:macvisionaries+unsubscr...@googlegroups.com>. >>> To post to this group, send email to macvisionaries@googlegroups.com >>> <mailto:macvisionaries@googlegroups.com>. >>> Visit this group at http://groups.google.com/group/macvisionaries >>> <http://groups.google.com/group/macvisionaries>. >>> For more options, visit https://groups.google.com/d/optout >>> <https://groups.google.com/d/optout>. >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "MacVisionaries" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to macvisionaries+unsubscr...@googlegroups.com >> <mailto:macvisionaries+unsubscr...@googlegroups.com>. >> To post to this group, send email to macvisionaries@googlegroups.com >> <mailto:macvisionaries@googlegroups.com>. >> Visit this group at http://groups.google.com/group/macvisionaries >> <http://groups.google.com/group/macvisionaries>. >> For more options, visit https://groups.google.com/d/optout >> <https://groups.google.com/d/optout>. > > > -- > You received this message because you are subscribed to the Google Groups > "MacVisionaries" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to macvisionaries+unsubscr...@googlegroups.com > <mailto:macvisionaries+unsubscr...@googlegroups.com>. > To post to this group, send email to macvisionaries@googlegroups.com > <mailto:macvisionaries@googlegroups.com>. > Visit this group at http://groups.google.com/group/macvisionaries > <http://groups.google.com/group/macvisionaries>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. -- You received this message because you are subscribed to the Google Groups "MacVisionaries" group. To unsubscribe from this group and stop receiving emails from it, send an email to macvisionaries+unsubscr...@googlegroups.com <mailto:macvisionaries+unsubscr...@googlegroups.com>. To post to this group, send email to macvisionaries@googlegroups.com <mailto:macvisionaries@googlegroups.com>. Visit this group at http://groups.google.com/group/macvisionaries <http://groups.google.com/group/macvisionaries>. For more options, visit https://groups.google.com/d/optout <https://groups.google.com/d/optout>. -- You received this message because you are subscribed to the Google Groups "MacVisionaries" group. To unsubscribe from this group and stop receiving emails from it, send an email to macvisionaries+unsubscr...@googlegroups.com. To post to this group, send email to macvisionaries@googlegroups.com. Visit this group at http://groups.google.com/group/macvisionaries. For more options, visit https://groups.google.com/d/optout.
