Hi, Following discussion in this thread, I have done the following with mine.
Firstly, I stopped using Sharp Keys, and remaped all my keys through Fusion itself, using the grave key as have many others. I did remap command to alt and option to Windows in the end, and also mapped option-tab to alt-tab. I then set up an activity for Fusion which turns off my keyboard commander, which I normally use, but I left the Mac shortcuts enabled. If I want to quickly skip to a specific Mac app, I use f12, the key I set for Launchpad in System Preferences, type a couple of characters and hit return when it realises what I want. OK, switching apps is slightly trickier than before, but I can still do it quickly, and it does give me a pretty native feeling Windows. I use NVDA too, but I can't, for the life of me, think what Jaws keys people could be having a problem with. Cheers Dave On 23 Aug 2014, at 00:37, Phil Halton <philh...@gmail.com> wrote: > I honestly don't know what you're doing that's giving you all this trouble, > but I can tell you that I use fusion Windows 7 and Mac without any trouble. I > have remapped my grads accent key to be the Jaws modifier key, or the NVDA > modifier key if that's what you use. I used the windows application called > sharp keys to do the remapping. Sharkeys is a little funky and a little > confusing at first, but it works fine once you do it. Other than this there > is no reason why fusion shouldn't be working for you. Many dozens of people > at least on this list are using windows with fusion and they don't report any > problems same as you were having. I wish I could help you more, but I just > don't know what to tell you. If you're using a standard install a fusion and > you've installed windows, then you need only to remap a key for a modifier > key for your screen reader and then you should be fine. You can also with > infusion settings set some key to be an insert key and then tell your screen > reader to use the answer key. I've done that as well. I hope I understand > correctly you're having trouble with certain keys not being passed to Jaws > that seem to be getting grabbed by Mac or vice a versa. That would be a > problem within the global key Settings of fusion. If you look around in those > settings, and truly understand what how they work, then you should be able to > clear that up without any difficulty. Don't give up on fusion just yet. Once > you get it working you'll be glad you stuck with it. I wish I could help you > more but I just can't. > > Sent from my IPhone > > >> On Aug 22, 2014, at 7:31 PM, gs <geoffsli...@gmail.com> wrote: >> >> I'm thinking about abandoning Fusion and using Bootcamp because I have not >> found a way around the conflicts with OS X and JAWS laptop keyboard layout. >> Is there anyone who has found a solution for Fusion >> that allows *all* the JAWS keys to be sent to JAWS and not captured by OS X? >> >> Sure, you can use Capslock + T to read the windows title. However, I cannot >> use many of the keys on the right side of the keyboard in conjunction with >> capslock to perform many JAWS functions essential for full JAWS usability. >> >> I need full access to JAWS with Fusion or none at all at this point. I >> really really hate to resort to Bootcamp because the attractiveness of using >> the Mac hinges upon use of a virtual machine for Windows for me. I need >> both and full access to both with the Macbook Air keyboard. I do not want >> to have to connect an external keyboard each time I need to use Windows. >> >> Does anyone have any suggestions? >> >> >> >> >> >> On Aug 20, 2014, at 9:35 PM, Eric Caron <ecar...@comcast.net> wrote: >> >> Also, >> >> You may want to consider using Keyremap4macbook and its PC counter part. >> I use this to turn my capslock key on the Mac into VO keys and on the >> virtual machine it turns my caps lock into a insert key for PC screen >> readers. >> >> Just another option to consider. >> >> Eric Caron >> >> >>> On Aug 20, 2014, at 4:44 AM, Kliphton Senior <m.kliph...@icloud.com> wrote: >>> >>> That is correct. You can download it on the mac, but it will have to be >>> installed on windows. >>> >>>> On Aug 20, 2014, at 2:36 AM, Hank Smith, and Seeing-eye dog Iona >>>> <hank.smith...@gmail.com> wrote: >>>> >>>> if memory serves it is a windows app >>>> hth >>>> Hank >>>> >>>>> On 8/19/2014 9:47 AM, Caitlyn Furness wrote: >>>>> Is sharp keys a mac app, or something you download once in the vm? >>>>> Thanks! >>>>> Cait >>>>> >>>>>> On Aug 17, 2014, at 9:00 PM, Kliphton Senior <m.kliph...@gmail.com> >>>>>> wrote: >>>>>> >>>>>> That's why I prefer the sharp keys way. >>>>>> >>>>>> Frustrated with your Mac, I-device, or AppleTV? New user and want quick >>>>>> efficient answers? Or maybe you know apple products and want to >>>>>> contribute? >>>>>> Then come join a list where questions are always answered, and we are >>>>>> always >>>>>> patient with you. >>>>>> Subscribe here: apple4beginners-subscr...@yahoogroups.com >>>>>> All are welcome! >>>>>> -----Original Message----- >>>>>> From: macvisionaries@googlegroups.com >>>>>> [mailto:macvisionaries@googlegroups.com] On Behalf Of David Taylor >>>>>> Sent: Sunday, August 17, 2014 4:15 PM >>>>>> To: macvisionaries@googlegroups.com >>>>>> Subject: Re: Remapping keys with VM fusion >>>>>> >>>>>> Hi, >>>>>> >>>>>> Couple of points here. Firstly, if you delete all the built in >>>>>> keystrokes, >>>>>> you have to do a lot of finger contortions that you don't actually need >>>>>> to >>>>>> do, given that the mac keystrokes are much easier to reach than the >>>>>> windows >>>>>> ones. I would advise people to keep them, they can actually come in >>>>>> really >>>>>> handy. Secondly, and more importantly, if you swap the windows and alt >>>>>> keys >>>>>> round in Windows, how can you command-tab away from Fusion, as command is >>>>>> now alt, so would give you the alt-tab keystroke in Windows? Yes, it >>>>>> takes a >>>>>> little getting used to the fusion arrangement, but it gives you far more >>>>>> flexibility than doing this remapping does. >>>>>> >>>>>> Cheers >>>>>> Dave >>>>>> >>>>>>> On 17 Aug 2014, at 11:57, Kliphton Senior <m.kliph...@gmail.com> wrote: >>>>>>> >>>>>>> Below is what I found in my collection of mac tutorials. >>>>>>> Mapping keys in fusion >>>>>>> >>>>>>>> First off, it is true that you have no insert key on the mac, while >>>>>>>> you >>>>>>> often >>>>>>>> do need one in windows. You can create a key mapping for yourself in >>>>>>>> 1 of >>>>>>> 2 >>>>>>>> ways. Either using fusion itself, and there is no real down side as >>>>>>>> far as >>>>>>> I'm >>>>>>>> aware, but it is a little tricky to set up because of an interface >>>>>>>> issue >>>>>>> in >>>>>>>> fusion. The other way to get an insert key is to use the sharp keys >>>>>>> program. >>>>>>>> Sharp keys lets you remap a few more keys than fusion will allow. For >>>>>>>> example, using sharp keys, you can even remap your right command, or >>>>>>>> your right option key, to the windows insert. >>>>>>>> >>>>>>>> If you do it via fusion, then all your virtual machines will get an >>>>>>>> insert >>>>>>> key. If >>>>>>>> you have windows 7 and xp like I do, creating the insert key using >>>>>>>> the >>>>>>> fusion >>>>>>>> keyboard remapper creates it for all virtual machines because fusion >>>>>>>> only allows you to do it inside its global preferences, command >>>>>>>> comma, and not on a per machine basis, command e. >>>>>>>> >>>>>>>> If you create your insert key using sharp keys, then it is going to >>>>>>>> be a >>>>>>> local >>>>>>>> setting for that windows installation only, because sharp keys >>>>>>>> modifies >>>>>>> the >>>>>>>> windows registry to do the trick. Both methods will give you the same >>>>>>>> result: an insert key that is not just insert, but that can be held >>>>>>>> down >>>>>>> as if it >>>>>>>> were a modifier key for other keys. >>>>>>>> >>>>>>>> This answers your other issue, where caps lock cannot be used inside >>>>>>>> the virtual machine as a modifier. It works as a caps lock, but you >>>>>>>> can't >>>>>>> hold it >>>>>>>> down and press a letter inside the virtual machine, in order to give >>>>>>>> commands to your screen reader. Sharp keys and fusion itself though, >>>>>>>> will give you an insert key like the one on a normal windows >>>>>>>> computer. This >>>>>>> lets >>>>>>>> you use insert rather than caps lock for your screen reader's >>>>>>>> commands, so let's concentrate on insert, and I will leave caps lock >>>>>>>> for >>>>>> someone else. >>>>>>>> Now, let's look at the way you can do it inside fusion. I'm using >>>>>>>> fusion >>>>>>> 3.1.3, >>>>>>>> which is the latest version as of today. To update, go to the menu >>>>>>>> bar in fusion, vo m, then once right, then down to check for updates, >>>>>>>> and then follow the instructions. >>>>>>>> >>>>>>>> First, fire up fusion and, just to be certain, have your virtual >>>>>>>> machines >>>>>>> shut >>>>>>>> down. Then press command comma to open fusion's global preferences. >>>>>>>> >>>>>>>> At the top of this window is a toolbar. Interact with it and click >>>>>>> keyboard and >>>>>>>> mouse. A new window will appear. >>>>>>>> >>>>>>>> The first thing you will encounter is a pop up button where you >>>>>>>> choose >>>>>>> your >>>>>>>> keyboard and mouse profile. The window itself consists of 4 tab >>>>>>>> sheets, >>>>>>> and >>>>>>>> all those settings together are stored in a keyboard and mouse >>>>>>>> profile. I don't think we will ever need a second profile, but that's >>>>>>>> what the button allows. Leave it at its default. >>>>>>>> >>>>>>>> The first tab sheet of this dialog, named, key mappings, is where >>>>>>>> you can swap your windows logo and alt keys. By default, fusion will >>>>>>>> map your command key to the windows logo key, and your option key to >>>>>>>> the windows alt key. This is not very intuitive for those of us who >>>>>>>> are used to >>>>>>> windows >>>>>>>> and its keyboard layout, but it's easy to swap them. See below. In >>>>>>>> this window, you will also be able to create your insert key inside >>>>>>>> fusion, and >>>>>>> if >>>>>>>> you want, give yourself a numb lock toggle as well. >>>>>>>> >>>>>>>> If you look at this table, then many mac keys are mapped to some >>>>>>>> windows counterparts. Personally, I don't think that is necessary at >>>>>>>> all. For >>>>>>> example, >>>>>>>> in windows, you use control plus c to copy an item to the clipboard. >>>>>>>> On >>>>>>> the >>>>>>>> mac, we're used to pressing command plus c to copy. In fusion, there >>>>>>>> is a default key mapping that makes command c the equivalent of >>>>>>>> control c. In other words, pressing control c or command c in windows >>>>>>>> will do the same thing. This is non-standard windows tweaking I don't >>>>>>>> like, so what I did >>>>>>> to >>>>>>>> begin with, is clear this entire list. To the right of this table, >>>>>>>> you >>>>>>> have 2 >>>>>>>> unlabeled buttons. The left one is add, and the right one is delete >>>>>>>> and >>>>>>> entry >>>>>>>> in this table. Just focus on the right button of the 2, and hit vo >>>>>>>> space >>>>>>> until >>>>>>>> the list is empty. You will also delete the undesired alt and windows >>>>>>>> logo key mappings this way. >>>>>>>> >>>>>>>> Now, you must create your own mappings, so that your mac command key >>>>>>>> will become the alt key in windows, and so that your option key can >>>>>>>> become your windows logo key inside windows. Here's how to do it. >>>>>>>> >>>>>>>> First, click add, to add a new mapping to the table. This is the left >>>>>>> unlabeled >>>>>>>> button, to the right of the table. A new window appears, that you >>>>>>>> will >>>>>>> later >>>>>>>> close with an ok button to return here. >>>>>>>> >>>>>>>> In the new window, you see your mac modifier keys with checkboxes, >>>>>>>> and a combo box for an additional key. For example, you will hear >>>>>>>> shift >>>>>>> unchecked >>>>>>>> checkbox, and command, unchecked checkbox. In this case, where we >>>>>>>> want to map our option key to the windows logo key, we don't need the >>>>>>>> combo boxes in this dialog, so ignore them for now. Focus on the >>>>>>>> from, and the >>>>>>> to, >>>>>>>> parts. >>>>>>>> >>>>>>>> We are mapping our option key to the windows logo key. In the from, >>>>>>>> area, tick the checkbox for the option key. Leave the rest in the >>>>>>>> from for what >>>>>>> it >>>>>>>> is. Next, find the text that says, to. Here, you will find checkboxes >>>>>>>> for >>>>>>> the >>>>>>>> windows counterparts of the mac key you are mapping. Now take care. >>>>>>>> One of those checkboxes will only say, checkbox, without a >>>>>>>> description like >>>>>>> alt, >>>>>>>> or control. It is this unlabeled checkbox that we need to map our >>>>>>>> option >>>>>>> key >>>>>>>> to. On the screen, this checkbox, in the to, field, is an icon with >>>>>>>> the >>>>>>> windows >>>>>>>> logo key. So tick that box. Finally, proceed to the okay button and >>>>>>>> press >>>>>>> it. >>>>>>>> You will return to the command comma, toolbar item keyboard and mouse >>>>>>>> screen, where you pressed the unlabeled add button. your first key >>>>>>>> mapping, is in place. Option is now windows logo as soon as the >>>>>>>> virtual windows machine is active. >>>>>>>> >>>>>>>> Now, repeat the same procedure for your alt key. So, click add, then >>>>>>>> in >>>>>>> the >>>>>>>> from, field, tick command, then in the to, field, click alt, and >>>>>>>> press >>>>>>> okay. >>>>>>>> Now that you know how to remap keys, you can do the same thing for >>>>>>>> your insert key. However, this is where it is a little tricky and you >>>>>>>> will soon understand why. >>>>>>>> >>>>>>>> As above, again click the add button in this dialog. Reminder: we >>>>>>>> came >>>>>>> here >>>>>>>> by starting fusion, then command comma, then keyboard and mouse from >>>>>>>> the toolbar, then the first tab sheet named key mappings. >>>>>>>> >>>>>>>> After the remapper dialog with the from, and to, field, appears >>>>>>>> again, do >>>>>>> the >>>>>>>> following to create your insert key. >>>>>>>> >>>>>>>> In the from, field, you need to choose which key on your keyboard is >>>>>>>> going to loose its function for windows, and act as your new insert >>>>>>>> key. Leave >>>>>>> all >>>>>>>> the checkboxes for the modifier keys like shift, option etc alone, >>>>>>>> and >>>>>>> focus >>>>>>>> on the combo box with voiceover. Once focus is on this field, >>>>>>>> assuming you have keyboard focus track your voiceover cursor, as is >>>>>>>> the voiceover >>>>>>> default, >>>>>>>> then you can now input the key you wish. I use the accent key, just >>>>>>>> below escape on the mac keyboard. Press it, or press your own choice, >>>>>>>> and you >>>>>>> will >>>>>>>> hear it spoken by voiceover. >>>>>>>> >>>>>>>> Of course, because this is a combo box, it does have a few presets, >>>>>>>> and >>>>>>> you >>>>>>>> can reach them with vo space. However, once you do this, you cannot >>>>>>>> get out of the box anymore with vo right or anything, because that >>>>>>>> keystroke too, will be interpreted as the key combination you are >>>>>>>> going to map. So, my advice is not to go through the 13 presets of >>>>>>>> this combo. Instead, >>>>>>> never >>>>>>>> open it and just type your desired insert key replacement, once the >>>>>>>> voiceover cursor and keyboard focus is on the combo box in the from, >>>>>>> field. >>>>>>>> Don't open the combo, just type your key when the box is focused. >>>>>>>> >>>>>>>> Now, focus on the combo box of the to, field. This second combo box, >>>>>>>> you do need to open with vo space, because you need to select the >>>>>>>> item named insert. However, you should only walk to it with the >>>>>>>> voiceover cursor, and you should not press vo space. This is the oddity >>>>>> you need to be aware of. >>>>>>>> This is because if you press vo space on the insert item in the combo >>>>>>>> box, then vo space, as well as all subsequent keys, will be >>>>>>>> interpreted as the >>>>>>> key >>>>>>>> you want to execute when you press accent, and you don't have a way >>>>>>>> to close the combo box to get to the okay button. >>>>>>>> >>>>>>>> So, after walking to the insert item with voiceover, and the to, >>>>>>>> combo box >>>>>>> is >>>>>>>> still open, you must command tab away from fusion, to have os10 focus >>>>>>>> move out of the combo box. Depending on what you had open, you may >>>>>>>> land in the finder. Command tabbing away from fusion is the only >>>>>>>> keystroke I have found, to get you away from the combo box. Then, >>>>>>>> simply command tab back into fusion, and you will find that the combo >>>>>>>> box is now closed, >>>>>>> and >>>>>>>> it is set to insert. >>>>>>>> >>>>>>>> Now, all you do is go to ok and click it. You will be returned to the >>>>>>>> key mapping dialog, where the list of keystrokes can be found. Now, >>>>>>>> you should have 3 mappings. One for command to become alt, one for >>>>>>>> option and windows logo, and a third for accent, that is now remapped >>>>>>>> to insert >>>>>>> inside >>>>>>>> any fusion virtual machine. >>>>>>>> >>>>>>>> If you want to give yourself a num lock toggle, that can be achieved >>>>>>>> the same way you created your insert key. Let's say you want to >>>>>>>> toggled your num lock with control shift f12. So, first click add, >>>>>>>> then in the from, >>>>>>> field, >>>>>>>> click, for example, the control and the shift box, go to the first >>>>>>>> combo, >>>>>>> select >>>>>>>> f12, move to the second combo in the to, field, and select numlock >>>>>>>> from there. Again, don't forget to open the box, walk to numlock, >>>>>>>> command tab away and then back into fusion, and hit okay. >>>>>>>> This is what you need to do in the first tab sheet of the fusion >>>>>>>> keyboard >>>>>>> and >>>>>>>> mouse dialog, and as I said, it was quite a story. >>>>>>>> >>>>>>>> We're not done yet. In the second tab sheet, named mouse shortcuts, >>>>>>>> you can tell fusion how you want to do a right click in windows. The >>>>>>>> mac only >>>>>>> has >>>>>>>> a normal mouse click, and not a separate left and a right one, so by >>>>>>> default, >>>>>>>> holding the control key and then pressing the mouse pad, a control >>>>>>>> click, will perform a right mouse click in windows, as if you pressed >>>>>>>> the >>>>>>> secondary >>>>>>>> button. Nothing need to be changed here. Of course, you have your >>>>>>>> windows shift f10 key combination as the keyboard equivalent of the >>>>>>>> right mouse click. Furthermore, you can also create your own windows >>>>>>>> applications key, normally near your arrows on a windows keyboard, >>>>>>>> the same way you created your alt and windows keys above. >>>>>>>> >>>>>>>> The third tab sheet, named fusion shortcuts, can make life a lot >>>>>>>> easier >>>>>>> for >>>>>>>> us, screenless folks. By default, if you're inside the virtual >>>>>>>> machine and >>>>>>> you >>>>>>>> happen to hit f12, f11 or another magic mac key that does something >>>>>>>> under os10, then even if you are inside the vm, you will fly out of >>>>>>>> it, and land somewhere where you will need to turn on voiceover, >>>>>>>> command tab back into fusion, minimize windows with command control >>>>>>>> enter, move the voiceover cursor to where it says progress bar >>>>>>>> because that's where windows shows up minimized, turn off voice over >>>>>>>> with command f5, and finally enlarge windows back to normal with >>>>>>>> command control enter, the same keystroke used to minimize windows. A >>>>>>>> lot of work, and not funny if you discover that windows no longer >>>>>>>> talks and you don't know which key you hit by accident. >>>>>>>> >>>>>>>> So, what you do is, turn the checkbox off here that says: enable mac >>>>>>>> os keyboard shortcuts. Now, if you accidentally hit f12 or f11, it >>>>>>>> won't mess >>>>>>> up >>>>>>>> things any longer. These keystrokes will instead be passed to >>>>>>>> windows, and no longer to os10 disturbing your windows experience. >>>>>>>> >>>>>>>> In the fourth tab sheet of this dialog, named fusion shortcuts, you >>>>>>>> can enable and disable a number of key combinations that you can >>>>>>>> press when the virtual windows machine is running, that affect fusion >>>>>>>> itself. You can mess with these because there is a friendly restore >>>>>>>> to defaults button as well. You will find a table here that you can >>>>>>>> interact with. On each line, >>>>>>> a >>>>>>>> key combination is listed, along with a checkbox to enable it. Here's >>>>>>>> a >>>>>>> few >>>>>>>> explained. >>>>>>>> >>>>>>>> Full screen. You need this keystroke, to make windows full screen >>>>>>>> when it >>>>>>> is >>>>>>>> minimized. It is the control command enter to minimize and maximize >>>>>>>> windows, as already mentioned. Make sure you have this checked. >>>>>>>> There are nine others, and some of them I have turned off, for >>>>>>>> reasons explained below. >>>>>>>> >>>>>>>> Unity: this makes one space out of the windows desktop and the mac >>>>>>>> side. >>>>>>>> So far, I have never used it in daily work, because I can't figure >>>>>>>> out how >>>>>>> it >>>>>>>> works. If you play with it and find out some benefits, please let us >>>>>> know. >>>>>>> I >>>>>>>> have this off, to avoid accidentally dropping into unity. >>>>>>>> >>>>>>>> Also off are cycle through windows, and cycle through windows reverse. >>>>>>>> This is because we can easily do this with voiceover, and I don't >>>>>>>> want to loose keystrokes that may otherwise be used for jaws or NVDA >>>>>> commands. >>>>>>>> Next is hide application. I have this off as well, because if you're >>>>>>>> in >>>>>>> the >>>>>>>> middle of a windows program and you want help, it is likely that you >>>>>>>> begin by pressing alt h to open the help menu. But watch out for this >>>>>>>> one, >>>>>>> because >>>>>>>> if you don't turn off command h for the virtual machine, and remember >>>>>>>> that alt and command are now the same key, then instead of opening >>>>>>>> the help menu inside your windows program, you will instead hide >>>>>>>> fusion completely, and be dropped into os10 where you don't have >>>>>>>> speech for the moment unless you turn it on. I fell into this pit >>>>>>>> some 5 times until I >>>>>>> realized >>>>>>>> what might be going on here. Turning this key combination off >>>>>>>> resolved the issue. Now, pressing alt h will nicely open the help >>>>>>>> menu in windows, and you will no longer be kicked out. >>>>>>>> >>>>>>>> Next, there is hide others. I have this off, because it does >>>>>>>> something to >>>>>>> os10 >>>>>>>> where I have no speech as long as I'm inside windows, and you want to >>>>>>>> let windows get your keystrokes as much as possible. >>>>>>>> >>>>>>>> The same goes for settings, the next key to turn off, which in fusion >>>>>>>> is command e. I hear you thinking. Usually command comma is for >>>>>>>> settings. >>>>>>>> Correct. However, command comma in fusion opens the general >>>>>>>> preferences for all virtual machines and fusion, while command e, as >>>>>>>> in echo, opens the settings for your specific virtual machine. How >>>>>>>> many processor cores to allocate it, how much ram etc. So, if windows >>>>>>>> wants you to press alt e, then you don't want to speechlessly land >>>>>>>> into fusion >>>>>>> settings. >>>>>>>> Rather, you want the alt e command to run in windows. Turn this off. >>>>>>>> >>>>>>>> The last key to turn of is command q for quit. Again, we don't have >>>>>>>> speech outside fusion so we can safely turn this off, so that command >>>>>>>> q, or alt q >>>>>>> for >>>>>>>> windows, is available to windows and not to fusion or os10. >>>>>>> >>>>>>> Kliphton >>>>>>> ~iMessage&Email~ m.kliph...@gmail.com >>>>>>> ~Twitter&Skype~ kliphton72 >>>>>>> "Personal blog-read at your own risk!" >>>>>>> http://kliphskorner.wordpress.com >>>>>>> >>>>>>> -----Original Message----- >>>>>>> From: macvisionaries@googlegroups.com >>>>>>> [mailto:macvisionaries@googlegroups.com] On Behalf Of Christopher >>>>>>> Hallsworth >>>>>>> Sent: Sunday, August 17, 2014 1:51 AM >>>>>>> To: macvisionaries@googlegroups.com >>>>>>> Subject: Re: Remapping keys with VM fusion >>>>>>> >>>>>>> Well I can do it so yes it can be done. I remember I had to vo-space >>>>>>> on the combo box so it becomes a list. You then use standard arrow >>>>>>> keys to find the key you want then I think you have to press return. >>>>>>> Pretty sure I wrote a guide on this over at www.applevis.com and maybe >>>>>>> to this list but can't remember as of now. But I know it can be done >>>>>> without apps like Sharp Keys. >>>>>>> Christopher Hallsworth >>>>>>> Student at the Hadley School for the Blind www.hadley.edu >>>>>>> >>>>>>>> On 17/08/2014 04:58, Bill Holton wrote: >>>>>>>> Hi. >>>>>>>> I am trying to remap the caps lock and insert keys without using >>>>>>>> sharp >>>>>>> keys. I can get to the fusion remapping section, I can interact with >>>>>>> the combo box with the additional keys. But when I cursor down to caps >>>>>>> lock, or the insert key, no matter how I try to activate it, I get a >>>>>>> cap A. Does anyone know if this can in fact be done, and what the >>>>>>> trick to doing it with voiceover is? >>>>>>>> >>>>>>>> Sent from my iPhone >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "MacVisionaries" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>>> an email to macvisionaries+unsubscr...@googlegroups.com. >>>>>>> To post to this group, send email to macvisionaries@googlegroups.com. >>>>>>> Visit this group at http://groups.google.com/group/macvisionaries. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups >>>>>> "MacVisionaries" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>>> an >>>>>> email to macvisionaries+unsubscr...@googlegroups.com. >>>>>>> To post to this group, send email to macvisionaries@googlegroups.com. >>>>>>> Visit this group at http://groups.google.com/group/macvisionaries. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> -- >>>>>> You received this message because you are subscribed to the Google Groups >>>>>> "MacVisionaries" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>>> email to macvisionaries+unsubscr...@googlegroups.com. >>>>>> To post to this group, send email to macvisionaries@googlegroups.com. >>>>>> Visit this group at http://groups.google.com/group/macvisionaries. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "MacVisionaries" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>> an email to macvisionaries+unsubscr...@googlegroups.com. >>>>>> To post to this group, send email to macvisionaries@googlegroups.com. >>>>>> Visit this group at http://groups.google.com/group/macvisionaries. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "MacVisionaries" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to macvisionaries+unsubscr...@googlegroups.com. >>>> To post to this group, send email to macvisionaries@googlegroups.com. >>>> Visit this group at http://groups.google.com/group/macvisionaries. >>>> For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "MacVisionaries" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to macvisionaries+unsubscr...@googlegroups.com. >>> To post to this group, send email to macvisionaries@googlegroups.com. >>> Visit this group at http://groups.google.com/group/macvisionaries. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "MacVisionaries" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to macvisionaries+unsubscr...@googlegroups.com. >> To post to this group, send email to macvisionaries@googlegroups.com. >> Visit this group at http://groups.google.com/group/macvisionaries. >> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "MacVisionaries" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to macvisionaries+unsubscr...@googlegroups.com. >> To post to this group, send email to macvisionaries@googlegroups.com. >> Visit this group at http://groups.google.com/group/macvisionaries. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "MacVisionaries" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to macvisionaries+unsubscr...@googlegroups.com. > To post to this group, send email to macvisionaries@googlegroups.com. > Visit this group at http://groups.google.com/group/macvisionaries. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "MacVisionaries" group. To unsubscribe from this group and stop receiving emails from it, send an email to macvisionaries+unsubscr...@googlegroups.com. To post to this group, send email to macvisionaries@googlegroups.com. Visit this group at http://groups.google.com/group/macvisionaries. For more options, visit https://groups.google.com/d/optout.
