ok should be good. thanks for confirming. strange. it's been debugged. On Mon, Nov 29, 2021 at 2:13 PM Patrick McDougal <[email protected]> wrote:
> It is Software 2.1, CS=3CA0, Build 19 Firmware 8 (0) > > On Nov 29, 2021, at 1:40 PM, Stephen Adolph <[email protected]> wrote: > > Patrick, please check your build number. > You need to be on build 19, if possible. Can you confirm? > > https://bitchin100.com/wiki/index.php?title=REXsharp > > Steve > > > > REX#, REXCPM Version 2.1 Release notes > ====================================== > > March 14, 2021 > > Changes to REXMGR / RXCMGR relative to build 13 > > Build 19. Additional fix for problem with de-installation and corruption > of ram files. > > Build 18. Changes to system to fix observed issues with running UR-2. > Disabled REXMGR when selecting UR-2 Option ROM. > Disable REX CHGET and CHPUT hooks when using OPTROMs in general. > Additional minor fixes. > > Build 17. Fixes problem with de-installation and corruption of ram files. > Simple fix - don't write REXMGR variable values when REXMGR is missing! > This lead to file corruption. > > Build 16. Improvements to RX#T to copy rom data to flash. > Fix for TEENY problem- write only 5 bytes to input buffer to clear entries. > > Build 15. No change to executables, only RX#Tx.DO. Added checksum testing. > > Build 14. Minor fix - printing "Y" twice on file kill in ram files menu. > > > > On Mon, Nov 29, 2021 at 1:25 PM Patrick McDougal <[email protected]> > wrote: > >> I performed a cold reboot and was able to load UR2 without the REXMGR. I >> am still unable to get View80 to work. I suspect that I have an OEM >> hardware issue… >> >> Patrick >> >> > On Nov 29, 2021, at 10:56 AM, Stephen Adolph <[email protected]> >> wrote: >> > >> > I just tried View80 on my T102 running REX# Rel 2.1 and it worked fine. >> > Cold restart? >> >> >
