It is REX#2.1. I performed the following… 1. Removed the batteries and turned off the memory power. 2. Restarted the machine and then performed a call 63012 3. REXMGR appears in the menu and then CTRL-X and removed the hooks. 4. Opened BASIC, call 63012. 5. Entered UR and selected View80.
On the initial try, I received a continuous tone that required the reset button. On the second try, I selected View80 and noticed “Can’t” displayed below the menu. On the 3rd try, I received a “Change HIMEM?” and typed Y and then attempted to enter the edit portion of T-Word and it locked up. Through my testing, I have also had the Telcom prompt pop up below the UR menu when turning on View80. Oddly, I have never seen the option to select the screen width that is mentioned in the UR documentation. I have reloaded the UR bx file in case of an error when transferring. For what its worth, the machine has been very stable with no issues using UR except when attempting to active View80. Any additional recommendations would be much appreciated. Thanks, Patrick > On Nov 29, 2021, at 8:12 AM, Stephen Adolph <[email protected]> wrote: > > I seem to recall fixing this. Can you confirm you are on release 2.1 > firmware for REX#? it may well be a conflict. As Ben said using CNTL-X > before you start the ROM using Call 63012 (don't start the rom from REX > Manager) gives you a REX# free try. > > > On Mon, Nov 29, 2021 at 3:15 AM Ben Wiley Sittler <[email protected] > <mailto:[email protected]>> wrote: > Have you tried removing the REX# hooks before activating 80 column mode? I > believe they are not compatible > > On Sun, Nov 28, 2021, 16:50 Patrick McDougal <[email protected] > <mailto:[email protected]>> wrote: > To the group, > > As you may recall, I recently bought a used M100 off of Ebay. I cleaned it > up and upgrade the RAM to 32k and installed a Rex# (Thank you Steve!). I > successfully connected in to a Windows 10 machine using Laddie Alpha and > loaded the UR2100 ROM. I have been trying to use the View 80 function which > seems to install in high memory when I select it. When I attempt to use > T-Word, the blank text editing screen appears with a smaller cursor in the > left upper corner and then locks up. This requires a cold reboot of the > machine (removing the batteries and turning off the memory backup power) to > restore any function. I can then reload the RexMgr and start again. This > error does not occur if I do not load the View80 component of Ultimate ROM. > > Has anyone else experienced this issue or have an idea about troubleshooting? > > Thanks, > > Patrick
smime.p7s
Description: S/MIME cryptographic signature
