Auwch... At first, I couldn't make a minimal working example...until I
discovered that I was always copying a figure (and then changing the filename),
with extra LyX-LaTex-settings in the third tab, combined with the following in
my preamble:
\usepackage[export]{adjustbox}
Just to be able to use valign for my figures.
Probably this is the cause of all my problems with aspect ratio's and figures!!!
Sorry, only by inspecting the source window in LyX, together with trying to
create a MWE, I (probably) discovered the actual cause of my problem(s).
Thanks, your suggestion of making a MWE showed me the way. Orry for your time,
thanks for your help.
Stef
________________________________
Van: Maria Gouskova <gousk...@gmail.com>
Verzonden: woensdag 5 juni 2024 14:22
Aan: Stef Pillaert <stef.pilla...@kuleuven.be>
CC: lyx-users@lists.lyx.org <lyx-users@lists.lyx.org>
Onderwerp: Re: Aspect ratio sometimes set to "off"
Hi Stef,
On Wed, Jun 5, 2024 at 7:49 AM Stef Pillaert
<stef.pilla...@kuleuven.be<mailto:stef.pilla...@kuleuven.be>> wrote:
Follow up: if the settings are like this, the aspect ratio always seems to be
neglected, resulting in vertically stretched figures in the output.
I work on windows 11 (the problem was similar in previous versions of LyX, on
windows 10).
Stef
[cid:ii_18fe8540969cb971f162]
I think this is the desired behavior of that dialog. It's explained in the
Embedded Objects manual (look under "Help"). The "maintain aspect ratio" option
is only available when you set both dimensions, and then the dimension settings
are interpreted as the maximum dimensions not to exceed. If you set only one,
the other is set automatically, and the aspect ratio setting is on
automatically. The one thing that I think is not working correctly is that the
aspect ratio option is grayed out but does not appear to be checked, even
though it's on.
When I try your settings (set only one dimension to 50% of the page width,
leave the other unset) I get the correct behavior. Can you create a minimal
working example of an image that comes out distorted when you set only one
dimension?
Maria
________________________________
Van: Stef Pillaert <stef.pilla...@kuleuven.be<mailto:stef.pilla...@kuleuven.be>>
Verzonden: woensdag 5 juni 2024 9:33
Aan: lyx-users@lists.lyx.org<mailto:lyx-users@lists.lyx.org>
<lyx-users@lists.lyx.org<mailto:lyx-users@lists.lyx.org>>
Onderwerp: Aspect ratio sometimes set to "off"
A small problem I every now and then notice with figures: the setting to keep
the aspect ratio sometimes "disappears". Hard to reproduce this behavior
consistently. When I copy-paste figures, I know that I risk that this will
happen. But I think it also happens in other situations. Again, hard to
reproduce consistently, it happens "now and then".
A bit annoying, since this makes me check the entire document to detect whether
this has happened or not.
I hoped this behavior would have disappeared in LyX 2.4, but this doesn't seem
to be the case.
Stef
[cid:ii_18fe8540969cb971f161]
--
lyx-users mailing list
lyx-users@lists.lyx.org<mailto:lyx-users@lists.lyx.org>
http://lists.lyx.org/mailman/listinfo/lyx-users
--
lyx-users mailing list
lyx-users@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-users
