Martin Vermeer wrote:
> Did you configure again (needed to regenerate the Makefiles which have
> changed)? You should be able to get away with ./config.status before
> make. (I'm not quite sure if you should start from autogen.sh)
Yes (make distclean, autogen.sh etc.). No difference.
> If you did, I'd like to see the backtrace :-)
below. The error is in branch_update() and happens if the BranchList is empty.
Here is how I changed branch_update() to get it stable (my FormDocument.C is
also attached):
void FormDocument::branch_update(BufferParams const & params)
{
if (!branch_.get())
return;
all_branches_ = params.branchlist.allBranches();
bool sel = false;
string color;
fl_clear_choice(branch_->choice_all_branches);
if (!all_branches_.empty()) {
fl_addto_choice(branch_->choice_all_branches, all_branches_.c_str());
fl_set_choice(branch_->choice_all_branches, 1);
string const current_branch =
fl_get_choice_text(branch_->choice_all_branches);
// put name into input box...
fl_set_input(branch_->input_all_branches, current_branch.c_str());
sel = params.branchlist.selected(current_branch);
color = params.branchlist.getColor(current_branch);
}
// display proper selection...
all_selected_ = params.branchlist.allSelected();
fl_set_button(branch_->check_select_branch, sel);
fl_clear_choice(branch_->choice_select);
if (!all_selected_.empty())
fl_addto_choice(branch_->choice_select, all_selected_.c_str());
// .. and proper color.
if (!color.empty())
fl_set_choice_text(branch_->choice_color, color.c_str());
all_colors_ = params.branchlist.allColors();
}
I have tested it a bit and it does what I would expect from it, also wrt
branch nesting. Good work!
A few remarks concerning the ui though:
- what is color supposed to do? I cannot see any color on screen or dvi.
- Is it necessary to hardcode the color to those six? If this concerns screen
representation, I'd like to use a real color selector (like in prefs).
- I do not like the branch selection ui at all. In qt, I would probably use a
QListBox (browser widget) instead of the choice_all_branches. All branches
would be listed there and the user can select multiple of them (QListBox
allows multiple selections). That's it, no second choice "all_selected", no
checkbox "check_select_branch". In xforms, if multiple selections are not
possible, I'd really recommend a two-browser-approach like the citation
dialog has. Like it is now, it is really very confusing IMO.
- I think the menu item should be disabled if there are no branches defined.
Actually, an enhancement would be to make a branches submenu where the user
can select a branch from the list. Branch "none" does not seem to be very
useful to me.
That's all from a first glance. Did I mention that I really like it? ;-)
Regards,
Juergen.
------------------------------------------------------------------------------
(gdb) bt
#0 0x403d9691 in kill () from /lib/libc.so.6
#1 0x403d9415 in raise () from /lib/libc.so.6
#2 0x403daa50 in abort () from /lib/libc.so.6
#3 0x4028f7d5 in __cxxabiv1::__terminate(void (*)()) ()
from /usr/lib/libstdc++.so.5
#4 0x4028f812 in std::terminate() () from /usr/lib/libstdc++.so.5
#5 0x4028f992 in __cxa_throw () from /usr/lib/libstdc++.so.5
#6 0x40245a10 in std::__throw_logic_error(char const*) ()
from /usr/lib/libstdc++.so.5
#7 0x4028236e in char* std::string::_S_construct<char const*>(char const*,
char const*, std::allocator<char> const&, std::forward_iterator_tag) () from
/usr/lib/libstdc++.so.5
#8 0x4027e979 in std::string::string(char const*, std::allocator<char>
const&) () from /usr/lib/libstdc++.so.5
#9 0x0820fc2e in FormDocument::branch_update(BufferParams const&) (
this=0x8550978, [EMAIL PROTECTED])
at ../../../boost/boost/scoped_ptr.hpp:93
#10 0x0820b655 in FormDocument::update() (this=0x83f22d0)
at FormDocument.C:421
#11 0x081fb8f3 in FormBase::show() (this=0x83f22d0) at FormBase.C:139
---Type <return> to continue, or q <return> to quit---
#12 0x082b0bd2 in ControlDialog<ControlConnectBD>::show() (
this=0x83f228c) at ControlDialog.tmpl:47
#13 0x081f1348 in Dialogs::showDocument() (this=0x0)
at ../../../src/frontends/controllers/GUI.h:28
/**
* \file FormDocument.C
* This file is part of LyX, the document processor.
* Licence details can be found in the file COPYING.
*
* \author Jürgen Vigna
* \author Rob Lahaye
* \author Martin Vermeer
*
* Full author contact details are available in file CREDITS
*/
#include <config.h>
#include "ControlDocument.h"
#include "FormDocument.h"
#include "forms/form_document.h"
#include "xformsBC.h"
#include "ButtonController.h"
#include "bmtable.h"
#include "checkedwidgets.h"
#include "input_validators.h" // fl_unsigned_float_filter
#include "xforms_helpers.h"
#include "bufferparams.h"
#include "CutAndPaste.h"
#include "debug.h"
#include "language.h"
#include "lyxrc.h"
#include "lyxtextclasslist.h"
#include "tex-strings.h"
#include "controllers/frnt_lang.h"
#include "controllers/helper_funcs.h"
#include "support/tostr.h"
#include "support/lstrings.h" // contains_functor, getStringFromVector
#include "support/filetools.h" // LibFileSearch
#include "lyx_xpm.h"
#include "lyx_forms.h"
#include "combox.h"
#include <boost/bind.hpp>
#include <functional>
using namespace lyx::support;
using std::bind2nd;
using std::vector;
namespace {
#if FL_VERSION == 0 || (FL_REVISION == 0 && FL_FIXLEVEL < 2)
bool const scalableTabfolders = false;
#else
bool const scalableTabfolders = true;
#endif
} // namespace anon
typedef FormCB<ControlDocument, FormDB<FD_document> > base_class;
FormDocument::FormDocument()
: base_class(_("Document Settings"), scalableTabfolders),
ActCell(0), Confirmed(0),
current_bullet_panel(0), current_bullet_depth(0), fbullet(0)
{}
void FormDocument::redraw()
{
if (form() && form()->visible)
fl_redraw_form(form());
else
return;
FL_FORM * outer_form = fl_get_active_folder(dialog_->tabfolder);
if (outer_form && outer_form->visible)
fl_redraw_form(outer_form);
}
void FormDocument::build()
{
// the tabbed folder
dialog_.reset(build_document(this));
// Allow the base class to control messages
setMessageWidget(dialog_->text_warning);
// Manage the restore, ok, apply, restore and cancel/close buttons
bcview().setOK(dialog_->button_ok);
bcview().setApply(dialog_->button_apply);
bcview().setCancel(dialog_->button_close);
bcview().setRestore(dialog_->button_restore);
// the document class form
class_.reset(build_document_class(this));
// disable for read-only documents
bcview().addReadOnly(class_->combox_class);
bcview().addReadOnly(class_->radio_indent);
bcview().addReadOnly(class_->radio_skip);
bcview().addReadOnly(class_->choice_pagestyle);
bcview().addReadOnly(class_->choice_fonts);
bcview().addReadOnly(class_->choice_fontsize);
bcview().addReadOnly(class_->radio_sides_one);
bcview().addReadOnly(class_->radio_sides_two);
bcview().addReadOnly(class_->radio_columns_one);
bcview().addReadOnly(class_->radio_columns_two);
bcview().addReadOnly(class_->input_extra);
bcview().addReadOnly(class_->input_skip);
bcview().addReadOnly(class_->choice_skip);
bcview().addReadOnly(class_->choice_spacing);
bcview().addReadOnly(class_->input_spacing);
// check validity of "length + unit" input
addCheckedGlueLength(bcview(), class_->input_skip,
class_->choice_skip);
// trigger an input event for cut&paste with middle mouse button.
setPrehandler(class_->input_extra);
setPrehandler(class_->input_skip);
setPrehandler(class_->input_spacing);
fl_set_input_return(class_->input_extra, FL_RETURN_CHANGED);
fl_set_input_return(class_->input_skip, FL_RETURN_CHANGED);
fl_set_input_return(class_->input_spacing, FL_RETURN_CHANGED);
FL_OBJECT * obj;
// Fill the combox and choices.
obj = class_->combox_class;
LyXTextClassList::const_iterator tit = textclasslist.begin();
LyXTextClassList::const_iterator tend = textclasslist.end();
for (; tit != tend; ++tit) {
if (tit->isTeXClassAvailable()) {
fl_addto_combox(obj, tit->description().c_str());
} else {
string item = bformat(_("Unavailable: %1$s"), tit->description());
fl_addto_combox(obj, item.c_str());
}
}
fl_set_combox_browser_height(obj, 400);
fl_addto_choice(class_->choice_spacing,
_(" Single | OneHalf | Double | Custom ").c_str());
fl_addto_choice(class_->choice_fontsize, "default|10|11|12");
for (int n = 0; tex_fonts[n][0]; ++n) {
fl_addto_choice(class_->choice_fonts,tex_fonts[n]);
}
// Create the contents of the unit choices; don't include the
// "%" terms...
vector<string> units_vec = getLatexUnits();
vector<string>::iterator ret =
std::remove_if(units_vec.begin(),
units_vec.end(),
bind2nd(contains_functor(), "%"));
units_vec.erase(ret, units_vec.end());
string const units = getStringFromVector(units_vec, "|");
fl_addto_choice(class_->choice_pagestyle,
"default|empty|plain|headings|fancy");
fl_addto_choice(class_->choice_skip,
_(" SmallSkip | MedSkip | BigSkip | Length ").c_str());
fl_addto_choice(class_->choice_skip_units, units.c_str());
// Set input filters on doc spacing to make it accept only
// unsigned numbers.
fl_set_input_filter(class_->input_spacing,
fl_unsigned_float_filter);
// disable for read-only documents
bcview().addReadOnly(dialog_->button_save_defaults);
bcview().addReadOnly(dialog_->button_reset_defaults);
// the document paper form
paper_.reset(build_document_paper(this));
// disable for read-only documents
bcview().addReadOnly(paper_->choice_paperpackage);
bcview().addReadOnly(paper_->radio_portrait);
bcview().addReadOnly(paper_->radio_landscape);
bcview().addReadOnly(paper_->choice_papersize);
bcview().addReadOnly(paper_->check_use_geometry);
bcview().addReadOnly(paper_->input_custom_width);
bcview().addReadOnly(paper_->input_custom_height);
bcview().addReadOnly(paper_->input_top_margin);
bcview().addReadOnly(paper_->input_bottom_margin);
bcview().addReadOnly(paper_->input_inner_margin);
bcview().addReadOnly(paper_->input_outer_margin);
bcview().addReadOnly(paper_->input_head_height);
bcview().addReadOnly(paper_->input_head_sep);
bcview().addReadOnly(paper_->input_foot_skip);
// check validity of "length + unit" input
addCheckedGlueLength(bcview(), paper_->input_custom_width);
addCheckedGlueLength(bcview(), paper_->input_custom_height);
addCheckedGlueLength(bcview(), paper_->input_top_margin);
addCheckedGlueLength(bcview(), paper_->input_bottom_margin);
addCheckedGlueLength(bcview(), paper_->input_inner_margin);
addCheckedGlueLength(bcview(), paper_->input_outer_margin);
addCheckedGlueLength(bcview(), paper_->input_head_height);
addCheckedGlueLength(bcview(), paper_->input_head_sep);
addCheckedGlueLength(bcview(), paper_->input_foot_skip);
// trigger an input event for cut&paste with middle mouse button.
setPrehandler(paper_->input_custom_width);
setPrehandler(paper_->input_custom_height);
setPrehandler(paper_->input_top_margin);
setPrehandler(paper_->input_bottom_margin);
setPrehandler(paper_->input_inner_margin);
setPrehandler(paper_->input_outer_margin);
setPrehandler(paper_->input_head_height);
setPrehandler(paper_->input_head_sep);
setPrehandler(paper_->input_foot_skip);
fl_set_input_return(paper_->input_custom_width, FL_RETURN_CHANGED);
fl_set_input_return(paper_->input_custom_height, FL_RETURN_CHANGED);
fl_set_input_return(paper_->input_top_margin, FL_RETURN_CHANGED);
fl_set_input_return(paper_->input_bottom_margin, FL_RETURN_CHANGED);
fl_set_input_return(paper_->input_inner_margin, FL_RETURN_CHANGED);
fl_set_input_return(paper_->input_outer_margin, FL_RETURN_CHANGED);
fl_set_input_return(paper_->input_head_height, FL_RETURN_CHANGED);
fl_set_input_return(paper_->input_head_sep, FL_RETURN_CHANGED);
fl_set_input_return(paper_->input_foot_skip, FL_RETURN_CHANGED);
fl_addto_choice(paper_->choice_papersize,
_(" Default | Custom | US letter | US legal "
"| US executive | A3 | A4 | A5 "
"| B3 | B4 | B5 ").c_str());
fl_addto_choice(paper_->choice_paperpackage,
_(" None "
"| Small Margins "
"| Very small Margins "
"| Very wide Margins ").c_str());
fl_addto_choice(paper_->choice_custom_width_units, units.c_str());
fl_addto_choice(paper_->choice_custom_height_units, units.c_str());
fl_addto_choice(paper_->choice_top_margin_units, units.c_str());
fl_addto_choice(paper_->choice_bottom_margin_units, units.c_str());
fl_addto_choice(paper_->choice_inner_margin_units, units.c_str());
fl_addto_choice(paper_->choice_outer_margin_units, units.c_str());
fl_addto_choice(paper_->choice_head_height_units, units.c_str());
fl_addto_choice(paper_->choice_head_sep_units, units.c_str());
fl_addto_choice(paper_->choice_foot_skip_units, units.c_str());
// the document language form
language_.reset(build_document_language(this));
// disable for read-only documents
bcview().addReadOnly(language_->combox_language);
bcview().addReadOnly(language_->choice_inputenc);
bcview().addReadOnly(language_->choice_quotes_language);
bcview().addReadOnly(language_->radio_single);
bcview().addReadOnly(language_->radio_double);
fl_addto_choice(language_->choice_inputenc,
"default|auto|latin1|latin2|latin3|latin4|latin5|latin9"
"|koi8-r|koi8-u|cp866|cp1251|iso88595|pt154");
vector<frnt::LanguagePair> const langs = frnt::getLanguageData(false);
// Store the identifiers for later
lang_ = getSecond(langs);
vector<frnt::LanguagePair>::const_iterator lit = langs.begin();
vector<frnt::LanguagePair>::const_iterator lend = langs.end();
for (; lit != lend; ++lit) {
fl_addto_combox(language_->combox_language,
lit->first.c_str());
}
fl_set_combox_browser_height(language_->combox_language, 400);
fl_addto_choice(language_->choice_quotes_language,
_(" ``text'' | ''text'' | ,,text`` | ,,text'' |"
" «text» | »text« ").c_str());
// the document options form
options_.reset(build_document_options(this));
// disable for read-only documents
bcview().addReadOnly(options_->counter_secnumdepth);
bcview().addReadOnly(options_->counter_tocdepth);
bcview().addReadOnly(options_->choice_ams_math);
bcview().addReadOnly(options_->check_use_natbib);
bcview().addReadOnly(options_->choice_citation_format);
bcview().addReadOnly(options_->input_float_placement);
bcview().addReadOnly(options_->choice_postscript_driver);
// trigger an input event for cut&paste with middle mouse button.
setPrehandler(options_->input_float_placement);
fl_set_input_return(options_->input_float_placement, FL_RETURN_CHANGED);
fl_addto_choice(options_->choice_ams_math,
_("Never | Automatically | Yes ").c_str());
for (int n = 0; tex_graphics[n][0]; ++n) {
fl_addto_choice(options_->choice_postscript_driver,
tex_graphics[n]);
}
fl_addto_choice(options_->choice_citation_format,
_(" Author-year | Numerical ").c_str());
// the document bullets form
bullets_.reset(build_document_bullet(this));
// disable for read-only documents
bcview().addReadOnly(bullets_->radio_depth_1);
bcview().addReadOnly(bullets_->radio_depth_2);
bcview().addReadOnly(bullets_->radio_depth_3);
bcview().addReadOnly(bullets_->radio_depth_4);
bcview().addReadOnly(bullets_->radio_panel_standard);
bcview().addReadOnly(bullets_->radio_panel_maths);
bcview().addReadOnly(bullets_->radio_panel_ding1);
bcview().addReadOnly(bullets_->radio_panel_ding2);
bcview().addReadOnly(bullets_->radio_panel_ding3);
bcview().addReadOnly(bullets_->radio_panel_ding4);
bcview().addReadOnly(bullets_->bmtable_panel);
bcview().addReadOnly(bullets_->choice_size);
bcview().addReadOnly(bullets_->input_latex);
// trigger an input event for cut&paste with middle mouse button.
setPrehandler(bullets_->input_latex);
fl_set_input_return(bullets_->input_latex, FL_RETURN_CHANGED);
fl_addto_choice(bullets_->choice_size,
_(" Default | Tiny | Smallest | Smaller "
"| Small | Normal | Large | Larger | Largest "
"| Huge | Huger ").c_str());
fl_set_choice(bullets_->choice_size, 1);
fl_set_input_maxchars(bullets_->input_latex, 80);
string const bmtablefile = LibFileSearch("images", "standard", "xpm");
fl_set_bmtable_pixmap_file(bullets_->bmtable_panel, 6, 6,
bmtablefile.c_str());
// the document branches form
branch_.reset(build_document_branch(this));
bcview().addReadOnly(branch_->choice_all_branches);
bcview().addReadOnly(branch_->input_all_branches);
bcview().addReadOnly(branch_->button_add_branch);
bcview().addReadOnly(branch_->button_remove_branch);
bcview().addReadOnly(branch_->check_select_branch);
bcview().addReadOnly(branch_->choice_color);
fl_addto_choice(branch_->choice_color,
_("none|white|red|green|blue|cyan|magenta").c_str());
// Handle middle mouse paint:
setPrehandler(branch_->input_all_branches);
fl_set_input_return(branch_->input_all_branches, FL_RETURN_CHANGED);
// Enable the tabfolder to be rescaled correctly.
if (scalableTabfolders)
fl_set_tabfolder_autofit(dialog_->tabfolder, FL_FIT);
// Stack tabs
fl_addto_tabfolder(dialog_->tabfolder,_("Document").c_str(),
class_->form);
fl_addto_tabfolder(dialog_->tabfolder,_("Paper").c_str(),
paper_->form);
fl_addto_tabfolder(dialog_->tabfolder,_("Language").c_str(),
language_->form);
fl_addto_tabfolder(dialog_->tabfolder,_("Extra").c_str(),
options_->form);
fbullet = fl_addto_tabfolder(dialog_->tabfolder,_("Bullets").c_str(),
bullets_->form);
if ((XpmVersion < 4) || (XpmVersion == 4 && XpmRevision < 7)) {
lyxerr << _("Your version of libXpm is older than 4.7.\n"
"The `bullet' tab of the document dialog "
"has been disabled") << '\n';
fl_deactivate_object(fbullet);
fl_set_object_lcol(fbullet, FL_INACTIVE);
}
fl_addto_tabfolder(dialog_->tabfolder,_("Branches").c_str(),
branch_->form);
}
void FormDocument::apply()
{
BufferParams & params = controller().params();
class_apply(params);
paper_apply(params);
language_apply(params);
options_apply(params);
bullets_apply(params);
branch_apply(params);
}
void FormDocument::update()
{
if (!dialog_.get())
return;
checkReadOnly();
BufferParams const & params = controller().params();
class_update(params);
paper_update(params);
language_update(params);
options_update(params);
bullets_update(params);
branch_update(params);
}
ButtonPolicy::SMInput FormDocument::input(FL_OBJECT * ob, long)
{
if (ob == bullets_->choice_size) {
ChoiceBulletSize(ob, 0);
} else if (ob == bullets_->input_latex) {
InputBulletLaTeX(ob, 0);
} else if (ob == bullets_->radio_depth_1 ||
ob == bullets_->radio_depth_2 ||
ob == bullets_->radio_depth_3 ||
ob == bullets_->radio_depth_4) {
BulletDepth(ob);
} else if (ob == bullets_->radio_panel_standard ||
ob == bullets_->radio_panel_maths ||
ob == bullets_->radio_panel_ding1 ||
ob == bullets_->radio_panel_ding2 ||
ob == bullets_->radio_panel_ding3 ||
ob == bullets_->radio_panel_ding4) {
BulletPanel(ob);
} else if (ob == bullets_->bmtable_panel) {
BulletBMTable(ob, 0);
} else if (ob == class_->choice_spacing) {
setEnabled(class_->input_spacing,
fl_get_choice(class_->choice_spacing) == 4);
} else if (ob == class_->combox_class) {
CheckChoiceClass();
} else if (ob == class_->radio_skip ||
ob == class_->radio_indent ||
ob == class_->choice_skip) {
bool const skip_used = fl_get_button(class_->radio_skip);
setEnabled(class_->choice_skip, skip_used);
bool const length_input =
fl_get_choice(class_->choice_skip) == 4;
setEnabled(class_->input_skip,
skip_used && length_input);
setEnabled(class_->choice_skip_units,
skip_used && length_input);
// Default unit choice is cm if metric, inches if US paper.
// If papersize is default, check the lyxrc-settings
int const paperchoice = fl_get_choice(paper_->choice_papersize);
bool const metric = (paperchoice == 1 && lyxrc.default_papersize > BufferParams::PAPER_EXECUTIVEPAPER)
|| paperchoice == 2 || paperchoice > 5;
string const default_unit = metric ? "cm" : "in";
if (getString(class_->input_skip).empty())
fl_set_choice_text(class_->choice_skip_units,
default_unit.c_str());
} else if (ob == options_->check_use_natbib) {
setEnabled(options_->choice_citation_format,
fl_get_button(options_->check_use_natbib));
} else if (ob == branch_->choice_all_branches ||
ob == branch_->button_add_branch ||
ob == branch_->button_remove_branch ||
ob == branch_->check_select_branch ||
ob == branch_->choice_color) {
branch_input(ob);
} else if (ob == dialog_->button_save_defaults) {
apply();
controller().saveAsDefault();
} else if (ob == dialog_->button_reset_defaults) {
BufferParams & params = controller().params();
params.textclass = fl_get_combox(class_->combox_class) - 1;
params.useClassDefaults();
UpdateLayoutDocument(params);
} else if (ob == paper_->radio_landscape) {
fl_set_choice(paper_->choice_paperpackage,
BufferParams::PACKAGE_NONE + 1);
} else if (ob == paper_->choice_papersize) {
int const paperchoice = fl_get_choice(paper_->choice_papersize);
bool const defsize = paperchoice == 1;
bool const custom = paperchoice == 2;
bool const a3size = paperchoice == 6;
bool const b3size = paperchoice == 9;
bool const b4size = paperchoice == 10;
if (custom)
fl_set_button(paper_->radio_portrait, 1);
bool const use_geom = (custom || a3size || b3size || b4size);
fl_set_button(paper_->check_use_geometry, int(use_geom));
setEnabled(paper_->input_top_margin, use_geom);
setEnabled(paper_->input_bottom_margin, use_geom);
setEnabled(paper_->input_inner_margin, use_geom);
setEnabled(paper_->input_outer_margin, use_geom);
setEnabled(paper_->input_head_height, use_geom);
setEnabled(paper_->input_head_sep, use_geom);
setEnabled(paper_->input_foot_skip, use_geom);
setEnabled(paper_->choice_top_margin_units, use_geom);
setEnabled(paper_->choice_bottom_margin_units, use_geom);
setEnabled(paper_->choice_inner_margin_units, use_geom);
setEnabled(paper_->choice_outer_margin_units, use_geom);
setEnabled(paper_->choice_head_height_units, use_geom);
setEnabled(paper_->choice_head_sep_units, use_geom);
setEnabled(paper_->choice_foot_skip_units, use_geom);
setEnabled(paper_->choice_custom_width_units, use_geom);
setEnabled(paper_->choice_custom_height_units, use_geom);
setEnabled(paper_->input_custom_width, custom);
setEnabled(paper_->input_custom_height, custom);
setEnabled(paper_->choice_custom_width_units, custom);
setEnabled(paper_->choice_custom_height_units, custom);
setEnabled(paper_->radio_portrait, !custom);
setEnabled(paper_->radio_landscape, !custom);
// Default unit choice is cm if metric, inches if US paper.
// If papersize is default, use the lyxrc-settings
bool const metric = (defsize && lyxrc.default_papersize > BufferParams::PAPER_EXECUTIVEPAPER)
|| paperchoice == 2 || paperchoice > 5;
string const default_unit = metric ? "cm" : "in";
if (getString(paper_->input_custom_width).empty())
fl_set_choice_text(paper_->choice_custom_width_units,
default_unit.c_str());
if (getString(paper_->input_custom_height).empty())
fl_set_choice_text(paper_->choice_custom_height_units,
default_unit.c_str());
if (getString(paper_->input_top_margin).empty())
fl_set_choice_text(paper_->choice_top_margin_units,
default_unit.c_str());
if (getString(paper_->input_bottom_margin).empty())
fl_set_choice_text(paper_->choice_bottom_margin_units,
default_unit.c_str());
if (getString(paper_->input_inner_margin).empty())
fl_set_choice_text(paper_->choice_inner_margin_units,
default_unit.c_str());
if (getString(paper_->input_outer_margin).empty())
fl_set_choice_text(paper_->choice_outer_margin_units,
default_unit.c_str());
if (getString(paper_->input_head_height).empty())
fl_set_choice_text(paper_->choice_head_height_units,
default_unit.c_str());
if (getString(paper_->input_head_sep).empty())
fl_set_choice_text(paper_->choice_head_sep_units,
default_unit.c_str());
if (getString(paper_->input_foot_skip).empty())
fl_set_choice_text(paper_->choice_foot_skip_units,
default_unit.c_str());
} else if (ob == paper_->choice_paperpackage &&
fl_get_choice(paper_->choice_paperpackage) != 1) {
fl_set_button(paper_->check_use_geometry, 0);
setEnabled(paper_->input_top_margin, false);
setEnabled(paper_->input_bottom_margin, false);
setEnabled(paper_->input_inner_margin, false);
setEnabled(paper_->input_outer_margin, false);
setEnabled(paper_->input_head_height, false);
setEnabled(paper_->input_head_sep, false);
setEnabled(paper_->input_foot_skip, false);
setEnabled(paper_->choice_top_margin_units, false);
setEnabled(paper_->choice_bottom_margin_units, false);
setEnabled(paper_->choice_inner_margin_units, false);
setEnabled(paper_->choice_outer_margin_units, false);
setEnabled(paper_->choice_head_height_units, false);
setEnabled(paper_->choice_head_sep_units, false);
setEnabled(paper_->choice_foot_skip_units, false);
} else if (ob == paper_->check_use_geometry) {
// don't allow switching geometry off in custom papersize
// mode nor in A3, B3, and B4
int const choice = fl_get_choice(paper_->choice_papersize);
if (choice == 2 || choice == 6 || choice == 9 || choice == 10)
fl_set_button(paper_->check_use_geometry, 1);
fl_set_choice(paper_->choice_paperpackage,
BufferParams::PACKAGE_NONE + 1);
bool const use_geom = fl_get_button(paper_->check_use_geometry);
setEnabled(paper_->input_top_margin, use_geom);
setEnabled(paper_->input_bottom_margin, use_geom);
setEnabled(paper_->input_inner_margin, use_geom);
setEnabled(paper_->input_outer_margin, use_geom);
setEnabled(paper_->input_head_height, use_geom);
setEnabled(paper_->input_head_sep, use_geom);
setEnabled(paper_->input_foot_skip, use_geom);
setEnabled(paper_->choice_top_margin_units, use_geom);
setEnabled(paper_->choice_bottom_margin_units, use_geom);
setEnabled(paper_->choice_inner_margin_units, use_geom);
setEnabled(paper_->choice_outer_margin_units, use_geom);
setEnabled(paper_->choice_head_height_units, use_geom);
setEnabled(paper_->choice_head_sep_units, use_geom);
setEnabled(paper_->choice_foot_skip_units, use_geom);
}
if (ob == paper_->choice_papersize || ob == paper_->radio_portrait
|| ob == paper_->radio_landscape) {
// either default papersize (preferences) or document
// papersize has to be A4
bool const enable = ( fl_get_choice(paper_->choice_papersize) == 1
&& lyxrc.default_papersize == BufferParams::PAPER_A4PAPER )
|| fl_get_choice(paper_->choice_papersize) == 7;
if (!enable)
fl_set_choice(paper_->choice_paperpackage,
BufferParams::PACKAGE_NONE + 1);
setEnabled(paper_->choice_paperpackage,
enable && fl_get_button(paper_->radio_portrait));
}
return ButtonPolicy::SMI_VALID;
}
void FormDocument::branch_input(FL_OBJECT * ob)
{
BufferParams & params = controller().params();
if (ob == branch_->choice_all_branches) {
string const current_branch =
fl_get_choice_text(branch_->choice_all_branches);
// put name into input box...
fl_set_input(branch_->input_all_branches, current_branch.c_str());
// display proper selection...
fl_set_button(branch_->check_select_branch,
params.branchlist.selected(current_branch));
// .. and proper color.
fl_set_choice_text(branch_->choice_color,
params.branchlist.getColor(current_branch).c_str());
} else {
string current_branch = fl_get_input(branch_->input_all_branches);
if (ob == branch_->button_add_branch) {
params.branchlist.add(current_branch);
fl_addto_choice(branch_->choice_all_branches, current_branch.c_str());
fl_set_choice_text(branch_->choice_all_branches, current_branch.c_str());
// Fill the other fields:
fl_set_button(branch_->check_select_branch, false);
fl_set_choice_text(branch_->choice_color, "none");
} else if (ob == branch_->button_remove_branch) {
params.branchlist.remove(current_branch);
// Update branch list
all_branches_ = params.branchlist.allBranches();
fl_clear_choice(branch_->choice_all_branches);
fl_addto_choice(branch_->choice_all_branches, all_branches_.c_str());
// Update selected-list...
all_selected_ = params.branchlist.allSelected();
fl_clear_choice(branch_->choice_select);
fl_addto_choice(branch_->choice_select, all_selected_.c_str());
// ...button...
current_branch = fl_get_choice_text(branch_->choice_all_branches);
fl_set_button(branch_->check_select_branch,
params.branchlist.selected(current_branch));
// ...and colour
fl_set_choice_text(branch_->choice_color,
params.branchlist.getColor(current_branch).c_str());
} else if (ob == branch_->check_select_branch) {
if (!current_branch.empty()) {
params.branchlist.setSelected(current_branch,
fl_get_button(branch_->check_select_branch));
fl_addto_choice(branch_->choice_select, current_branch.c_str());
}
} else if (ob == branch_->choice_color) {
if (!current_branch.empty()) {
string color = fl_get_choice_text(branch_->choice_color);
if (!color.empty())
params.branchlist.setColor(current_branch, color);
else
params.branchlist.setColor(current_branch, "none");
}
}
}
all_branches_ = params.branchlist.allBranches();
all_selected_ = params.branchlist.allSelected();
all_colors_ = params.branchlist.allColors();
}
bool FormDocument::class_apply(BufferParams ¶ms)
{
bool redo = false;
// If default skip is a "Length" but there's no text in the
// input field, reset the kind to "MedSkip", which is the default.
if (fl_get_choice(class_->choice_skip) == 4 &&
getString(class_->input_skip).empty()) {
fl_set_choice(class_->choice_skip, 2);
}
params.fonts = getString(class_->choice_fonts);
params.fontsize = getString(class_->choice_fontsize);
params.pagestyle = getString(class_->choice_pagestyle);
params.textclass = fl_get_combox(class_->combox_class) - 1;
BufferParams::PARSEP tmpsep = params.paragraph_separation;
if (fl_get_button(class_->radio_indent))
params.paragraph_separation = BufferParams::PARSEP_INDENT;
else
params.paragraph_separation = BufferParams::PARSEP_SKIP;
if (tmpsep != params.paragraph_separation)
redo = true;
VSpace tmpdefskip = params.getDefSkip();
switch (fl_get_choice(class_->choice_skip)) {
case 1:
params.setDefSkip(VSpace(VSpace::SMALLSKIP));
break;
case 2:
params.setDefSkip(VSpace(VSpace::MEDSKIP));
break;
case 3:
params.setDefSkip(VSpace(VSpace::BIGSKIP));
break;
case 4:
{
string const length =
getLengthFromWidgets(class_->input_skip,
class_->choice_skip_units);
params.setDefSkip(VSpace(LyXGlueLength(length)));
break;
}
default:
// DocumentDefskipCB assures that this never happens
params.setDefSkip(VSpace(VSpace::MEDSKIP));
break;
}
if (!(tmpdefskip == params.getDefSkip()))
redo = true;
if (fl_get_button(class_->radio_columns_two))
params.columns = 2;
else
params.columns = 1;
if (fl_get_button(class_->radio_sides_two))
params.sides = LyXTextClass::TwoSides;
else
params.sides = LyXTextClass::OneSide;
Spacing tmpSpacing = params.spacing;
switch (fl_get_choice(class_->choice_spacing)) {
case 1:
lyxerr[Debug::INFO] << "Spacing: SINGLE\n";
params.spacing.set(Spacing::Single);
break;
case 2:
lyxerr[Debug::INFO] << "Spacing: ONEHALF\n";
params.spacing.set(Spacing::Onehalf);
break;
case 3:
lyxerr[Debug::INFO] << "Spacing: DOUBLE\n";
params.spacing.set(Spacing::Double);
break;
case 4:
lyxerr[Debug::INFO] << "Spacing: OTHER\n";
params.spacing.set(Spacing::Other,
getString(class_->input_spacing));
break;
}
if (tmpSpacing != params.spacing)
redo = true;
params.options = getString(class_->input_extra);
return redo;
}
void FormDocument::paper_apply(BufferParams & params)
{
params.papersize2 = BufferParams::VMARGIN_PAPER_TYPE(fl_get_choice(paper_->choice_papersize) - 1);
params.paperpackage =
BufferParams::PAPER_PACKAGES(fl_get_choice(paper_->choice_paperpackage) - 1);
// set params.papersize from params.papersize2 and params.paperpackage
params.setPaperStuff();
params.use_geometry = fl_get_button(paper_->check_use_geometry);
if (fl_get_button(paper_->radio_landscape))
params.orientation = BufferParams::ORIENTATION_LANDSCAPE;
else
params.orientation = BufferParams::ORIENTATION_PORTRAIT;
params.paperwidth =
getLengthFromWidgets(paper_->input_custom_width,
paper_->choice_custom_width_units);
params.paperheight =
getLengthFromWidgets(paper_->input_custom_height,
paper_->choice_custom_height_units);
params.leftmargin =
getLengthFromWidgets(paper_->input_inner_margin,
paper_->choice_inner_margin_units);
params.topmargin =
getLengthFromWidgets(paper_->input_top_margin,
paper_->choice_top_margin_units);
params.rightmargin =
getLengthFromWidgets(paper_->input_outer_margin,
paper_->choice_outer_margin_units);
params.bottommargin =
getLengthFromWidgets(paper_->input_bottom_margin,
paper_->choice_bottom_margin_units);
params.headheight =
getLengthFromWidgets(paper_->input_head_height,
paper_->choice_head_height_units);
params.headsep =
getLengthFromWidgets(paper_->input_head_sep,
paper_->choice_head_sep_units);
params.footskip =
getLengthFromWidgets(paper_->input_foot_skip,
paper_->choice_foot_skip_units);
}
bool FormDocument::language_apply(BufferParams & params)
{
InsetQuotes::quote_language lga = InsetQuotes::EnglishQ;
bool redo = false;
switch (fl_get_choice(language_->choice_quotes_language) - 1) {
case 0:
lga = InsetQuotes::EnglishQ;
break;
case 1:
lga = InsetQuotes::SwedishQ;
break;
case 2:
lga = InsetQuotes::GermanQ;
break;
case 3:
lga = InsetQuotes::PolishQ;
break;
case 4:
lga = InsetQuotes::FrenchQ;
break;
case 5:
lga = InsetQuotes::DanishQ;
break;
}
params.quotes_language = lga;
if (fl_get_button(language_->radio_single))
params.quotes_times = InsetQuotes::SingleQ;
else
params.quotes_times = InsetQuotes::DoubleQ;
int const pos = fl_get_combox(language_->combox_language);
Language const * new_language = languages.getLanguage(lang_[pos-1]);
if (!new_language)
new_language = default_language;
params.language = new_language;
params.inputenc = getString(language_->choice_inputenc);
return redo;
}
bool FormDocument::options_apply(BufferParams & params)
{
bool redo = false;
params.graphicsDriver = getString(options_->choice_postscript_driver);
params.use_amsmath = static_cast<BufferParams::AMS>(
fl_get_choice(options_->choice_ams_math) - 1);
params.use_natbib = fl_get_button(options_->check_use_natbib);
params.use_numerical_citations =
fl_get_choice(options_->choice_citation_format) - 1;
int tmpchar = int(fl_get_counter_value(options_->counter_secnumdepth));
if (params.secnumdepth != tmpchar)
redo = true;
params.secnumdepth = tmpchar;
params.tocdepth = int(fl_get_counter_value(options_->counter_tocdepth));
params.float_placement =
getString(options_->input_float_placement);
return redo;
}
void FormDocument::bullets_apply(BufferParams & params)
{
/* update the bullet settings */
BufferParams & buf_params = controller().params();
for (int i = 0; i < 4; ++i) {
params.user_defined_bullets[i] = buf_params.temp_bullets[i];
}
}
void FormDocument::branch_apply(BufferParams & params)
{
params.branchlist.clear();
params.branchlist.add(all_branches_);
params.branchlist.setSelected(all_selected_, true);
params.branchlist.setColors(all_colors_);
}
void FormDocument::UpdateClassParams(BufferParams const & params)
{
// These are the params that have to be updated on any class change
// (even if the class defaults are not used) (JSpitzm 2002-04-08)
LyXTextClass const & tclass = textclasslist[params.textclass];
fl_set_combox(class_->combox_class, params.textclass + 1);
fl_clear_choice(class_->choice_fontsize);
fl_addto_choice(class_->choice_fontsize, "default");
fl_addto_choice(class_->choice_fontsize,
tclass.opt_fontsize().c_str());
fl_set_choice_text(class_->choice_fontsize,
params.fontsize.c_str());
fl_clear_choice(class_->choice_pagestyle);
fl_addto_choice(class_->choice_pagestyle, "default");
fl_addto_choice(class_->choice_pagestyle,
tclass.opt_pagestyle().c_str());
fl_set_choice_text(class_->choice_pagestyle,
params.pagestyle.c_str());
}
void FormDocument::class_update(BufferParams const & params)
{
if (!class_.get())
return;
UpdateClassParams(params);
fl_set_choice_text(class_->choice_fonts, params.fonts.c_str());
bool const indent = params.paragraph_separation == BufferParams::PARSEP_INDENT;
fl_set_button(class_->radio_indent, indent);
fl_set_button(class_->radio_skip, !indent);
int pos;
if (indent) {
pos = 2; // VSpace::MEDSKIP is default
} else {
switch (params.getDefSkip().kind()) {
case VSpace::LENGTH:
pos = 4;
break;
case VSpace::BIGSKIP:
pos = 3;
break;
case VSpace::SMALLSKIP:
pos = 1;
break;
case VSpace::MEDSKIP:
default:
pos = 2;
break;
}
}
fl_set_choice (class_->choice_skip, pos);
bool const length_input = pos == 4;
if (length_input) {
int const paperchoice = fl_get_choice(paper_->choice_papersize);
bool const metric = (paperchoice == 1 && lyxrc.default_papersize > BufferParams::PAPER_EXECUTIVEPAPER)
|| paperchoice == 2 || paperchoice > 5;
string const default_unit = metric ? "cm" : "in";
string const length = params.getDefSkip().asLyXCommand();
updateWidgetsFromLengthString(class_->input_skip,
class_->choice_skip_units,
length, default_unit);
} else {
fl_set_input(class_->input_skip, "");
}
setEnabled(class_->choice_skip, !indent);
setEnabled(class_->input_skip, length_input);
setEnabled(class_->choice_skip_units, length_input);
bool const two_sides = params.sides == LyXTextClass::TwoSides;
fl_set_button(class_->radio_sides_one, !two_sides);
fl_set_button(class_->radio_sides_two, two_sides);
bool const two_columns = params.columns == 2;
fl_set_button(class_->radio_columns_one, !two_columns);
fl_set_button(class_->radio_columns_two, two_columns);
fl_set_input(class_->input_extra, params.options.c_str());
switch (params.spacing.getSpace()) {
case Spacing::Other:
pos = 4;
break;
case Spacing::Double: // \doublespacing
pos = 3;
break;
case Spacing::Onehalf: // \onehalfspacing
pos = 2;
break;
case Spacing::Single: // \singlespacing
case Spacing::Default: // nothing bad should happen with this
default:
pos = 1;
break;
}
fl_set_choice(class_->choice_spacing, pos);
bool const spacing_input = pos == 4;
setEnabled(class_->input_spacing, spacing_input);
string const input = spacing_input ? tostr(params.spacing.getValue()) : string();
fl_set_input(class_->input_spacing, input.c_str());
}
void FormDocument::language_update(BufferParams const & params)
{
if (!language_.get())
return;
int const pos = int(findPos(lang_, params.language->lang()));
fl_set_combox(language_->combox_language, pos+1);
fl_set_choice_text(language_->choice_inputenc, params.inputenc.c_str());
fl_set_choice(language_->choice_quotes_language, params.quotes_language + 1);
fl_set_button(language_->radio_single, 0);
fl_set_button(language_->radio_double, 0);
if (params.quotes_times == InsetQuotes::SingleQ)
fl_set_button(language_->radio_single, 1);
else
fl_set_button(language_->radio_double, 1);
}
void FormDocument::options_update(BufferParams const & params)
{
if (!options_.get())
return;
fl_set_choice_text(options_->choice_postscript_driver,
params.graphicsDriver.c_str());
fl_set_choice(options_->choice_ams_math, params.use_amsmath + 1);
fl_set_button(options_->check_use_natbib, params.use_natbib);
fl_set_choice(options_->choice_citation_format,
int(params.use_numerical_citations)+1);
setEnabled(options_->choice_citation_format, params.use_natbib);
fl_set_counter_value(options_->counter_secnumdepth, params.secnumdepth);
fl_set_counter_value(options_->counter_tocdepth, params.tocdepth);
if (!params.float_placement.empty())
fl_set_input(options_->input_float_placement,
params.float_placement.c_str());
else
fl_set_input(options_->input_float_placement, "");
}
void FormDocument::paper_update(BufferParams const & params)
{
if (!paper_.get())
return;
fl_set_choice(paper_->choice_papersize, params.papersize2 + 1);
fl_set_choice(paper_->choice_paperpackage, params.paperpackage + 1);
fl_set_button(paper_->check_use_geometry, params.use_geometry);
int const paperchoice = fl_get_choice(paper_->choice_papersize);
bool const useCustom = paperchoice == 2;
bool const useGeom = fl_get_button(paper_->check_use_geometry);
fl_set_button(paper_->radio_portrait, 0);
setEnabled(paper_->radio_portrait, !useCustom);
fl_set_button(paper_->radio_landscape, 0);
setEnabled(paper_->radio_landscape, !useCustom);
if (params.orientation == BufferParams::ORIENTATION_LANDSCAPE)
fl_set_button(paper_->radio_landscape, 1);
else
fl_set_button(paper_->radio_portrait, 1);
setEnabled(paper_->choice_paperpackage,
//either default papersize (preferences)
//or document papersize has to be A4
(paperchoice == 7
|| paperchoice == 1 && lyxrc.default_papersize == BufferParams::PAPER_A4PAPER)
&& fl_get_button(paper_->radio_portrait));
// Default unit choice is cm if metric, inches if US paper.
bool const metric = (paperchoice == 1 && lyxrc.default_papersize > BufferParams::PAPER_EXECUTIVEPAPER)
|| paperchoice == 2 || paperchoice > 5;
string const default_unit = metric ? "cm" : "in";
updateWidgetsFromLengthString(paper_->input_custom_width,
paper_->choice_custom_width_units,
params.paperwidth, default_unit);
setEnabled(paper_->input_custom_width, useCustom);
setEnabled(paper_->choice_custom_width_units, useCustom);
updateWidgetsFromLengthString(paper_->input_custom_height,
paper_->choice_custom_height_units,
params.paperheight, default_unit);
setEnabled(paper_->input_custom_height, useCustom);
setEnabled(paper_->choice_custom_height_units, useCustom);
updateWidgetsFromLengthString(paper_->input_inner_margin,
paper_->choice_inner_margin_units,
params.leftmargin, default_unit);
setEnabled(paper_->input_inner_margin, useGeom);
setEnabled(paper_->choice_inner_margin_units, useGeom);
updateWidgetsFromLengthString(paper_->input_top_margin,
paper_->choice_top_margin_units,
params.topmargin, default_unit);
setEnabled(paper_->input_top_margin, useGeom);
setEnabled(paper_->choice_top_margin_units, useGeom);
updateWidgetsFromLengthString(paper_->input_outer_margin,
paper_->choice_outer_margin_units,
params.rightmargin, default_unit);
setEnabled(paper_->input_outer_margin, useGeom);
setEnabled(paper_->choice_outer_margin_units, useGeom);
updateWidgetsFromLengthString(paper_->input_bottom_margin,
paper_->choice_bottom_margin_units,
params.bottommargin, default_unit);
setEnabled(paper_->input_bottom_margin, useGeom);
setEnabled(paper_->choice_bottom_margin_units, useGeom);
updateWidgetsFromLengthString(paper_->input_head_height,
paper_->choice_head_height_units,
params.headheight, default_unit);
setEnabled(paper_->input_head_height, useGeom);
setEnabled(paper_->choice_head_height_units, useGeom);
updateWidgetsFromLengthString(paper_->input_head_sep,
paper_->choice_head_sep_units,
params.headsep, default_unit);
setEnabled(paper_->input_head_sep, useGeom);
setEnabled(paper_->choice_head_sep_units, useGeom);
updateWidgetsFromLengthString(paper_->input_foot_skip,
paper_->choice_foot_skip_units,
params.footskip, default_unit);
setEnabled(paper_->input_foot_skip, useGeom);
setEnabled(paper_->choice_foot_skip_units, useGeom);
fl_set_focus_object(paper_->form, paper_->choice_papersize);
}
void FormDocument::bullets_update(BufferParams const & params)
{
if (!bullets_.get() ||
((XpmVersion<4) ||
(XpmVersion==4 && XpmRevision<7)))
return;
bool const isLinuxDoc =
controller().docType() == ControlDocument::LINUXDOC;
setEnabled(fbullet, !isLinuxDoc);
if (isLinuxDoc) return;
fl_set_button(bullets_->radio_depth_1, 1);
fl_set_input(bullets_->input_latex,
params.user_defined_bullets[0].getText().c_str());
fl_set_choice(bullets_->choice_size,
params.user_defined_bullets[0].getSize() + 2);
}
void FormDocument::branch_update(BufferParams const & params)
{
if (!branch_.get())
return;
all_branches_ = params.branchlist.allBranches();
bool sel = false;
string color;
fl_clear_choice(branch_->choice_all_branches);
if (!all_branches_.empty()) {
fl_addto_choice(branch_->choice_all_branches, all_branches_.c_str());
fl_set_choice(branch_->choice_all_branches, 1);
string const current_branch = fl_get_choice_text(branch_->choice_all_branches);
// put name into input box...
fl_set_input(branch_->input_all_branches, current_branch.c_str());
sel = params.branchlist.selected(current_branch);
color = params.branchlist.getColor(current_branch);
}
// display proper selection...
all_selected_ = params.branchlist.allSelected();
fl_set_button(branch_->check_select_branch, sel);
fl_clear_choice(branch_->choice_select);
if (!all_selected_.empty())
fl_addto_choice(branch_->choice_select, all_selected_.c_str());
// .. and proper color.
if (!color.empty())
fl_set_choice_text(branch_->choice_color, color.c_str());
all_colors_ = params.branchlist.allColors();
}
void FormDocument::checkReadOnly()
{
if (bc().readOnly(controller().bufferIsReadonly())) {
postWarning(_("Document is read-only."
" No changes to layout permitted."));
} else {
clearMessage();
}
}
void FormDocument::ChoiceBulletSize(FL_OBJECT * ob, long /*data*/)
{
BufferParams & param = controller().params();
// convert from 1-6 range to -1-4
param.temp_bullets[current_bullet_depth].setSize(fl_get_choice(ob) - 2);
fl_set_input(bullets_->input_latex,
param.temp_bullets[current_bullet_depth].getText().c_str());
}
void FormDocument::InputBulletLaTeX(FL_OBJECT *, long)
{
BufferParams & param = controller().params();
param.temp_bullets[current_bullet_depth].
setText(getString(bullets_->input_latex));
}
void FormDocument::BulletDepth(FL_OBJECT * ob)
{
/* Should I do the following: */
/* 1. change to the panel that the current bullet belongs in */
/* 2. show that bullet as selected */
/* 3. change the size setting to the size of the bullet in Q.*/
/* 4. display the latex equivalent in the latex box */
/* */
/* I'm inclined to just go with 3 and 4 at the moment and */
/* maybe try to support the others later */
BufferParams & param = controller().params();
int data = 0;
if (ob == bullets_->radio_depth_1)
data = 0;
else if (ob == bullets_->radio_depth_2)
data = 1;
else if (ob == bullets_->radio_depth_3)
data = 2;
else if (ob == bullets_->radio_depth_4)
data = 3;
switch (fl_get_button_numb(ob)) {
case 3:
// right mouse button resets to default
param.temp_bullets[data] = ITEMIZE_DEFAULTS[data];
default:
current_bullet_depth = data;
fl_set_input(bullets_->input_latex,
param.temp_bullets[data].getText().c_str());
fl_set_choice(bullets_->choice_size,
param.temp_bullets[data].getSize() + 2);
}
}
void FormDocument::BulletPanel(FL_OBJECT * ob)
{
/* Here we have to change the background pixmap to that selected */
/* by the user. (eg. standard.xpm, psnfss1.xpm etc...) */
int data = 0;
if (ob == bullets_->radio_panel_standard)
data = 0;
else if (ob == bullets_->radio_panel_maths)
data = 1;
else if (ob == bullets_->radio_panel_ding2)
data = 2;
else if (ob == bullets_->radio_panel_ding3)
data = 3;
else if (ob == bullets_->radio_panel_ding4)
data = 4;
else if (ob == bullets_->radio_panel_ding1)
data = 5;
if (data != current_bullet_panel) {
fl_freeze_form(bullets_->form);
current_bullet_panel = data;
/* free the current pixmap */
fl_free_bmtable_pixmap(bullets_->bmtable_panel);
string new_panel;
if (ob == bullets_->radio_panel_standard) {
new_panel = "standard";
} else if (ob == bullets_->radio_panel_maths ) {
new_panel = "amssymb";
} else if (ob == bullets_->radio_panel_ding2) {
new_panel = "psnfss1";
} else if (ob == bullets_->radio_panel_ding3) {
new_panel = "psnfss2";
} else if (ob == bullets_->radio_panel_ding4) {
new_panel = "psnfss3";
} else if (ob == bullets_->radio_panel_ding1) {
new_panel = "psnfss4";
} else {
/* something very wrong happened */
// play it safe for now but should be an exception
current_bullet_panel = 0; // standard panel
new_panel = "standard";
}
new_panel += ".xpm";
fl_set_bmtable_pixmap_file(bullets_->bmtable_panel, 6, 6,
LibFileSearch("images", new_panel).c_str());
fl_redraw_object(bullets_->bmtable_panel);
fl_unfreeze_form(bullets_->form);
}
}
void FormDocument::BulletBMTable(FL_OBJECT * ob, long /*data*/)
{
/* handle the user input by setting the current bullet depth's pixmap */
/* to that extracted from the current chosen position of the BMTable */
/* Don't forget to free the button's old pixmap first. */
BufferParams & param = controller().params();
int bmtable_button = fl_get_bmtable(ob);
/* try to keep the button held down till another is pushed */
/* fl_set_bmtable(ob, 1, bmtable_button); */
param.temp_bullets[current_bullet_depth].setFont(current_bullet_panel);
param.temp_bullets[current_bullet_depth].setCharacter(bmtable_button);
fl_set_input(bullets_->input_latex,
param.temp_bullets[current_bullet_depth].getText().c_str());
}
void FormDocument::CheckChoiceClass()
{
BufferParams & params = controller().params();
lyx::textclass_type const tc =
fl_get_combox(class_->combox_class) - 1;
if (controller().loadTextclass(tc)) {
params.textclass = tc;
if (lyxrc.auto_reset_options) {
params.useClassDefaults();
UpdateLayoutDocument(params);
} else {
// update the params which are needed in any case
// (fontsizes, pagestyle)
UpdateClassParams(params);
}
} else {
int const revert = int(params.textclass);
fl_set_combox(class_->combox_class, revert + 1);
}
}
void FormDocument::UpdateLayoutDocument(BufferParams const & params)
{
if (!dialog_.get())
return;
checkReadOnly();
class_update(params);
paper_update(params);
language_update(params);
options_update(params);
bullets_update(params);
}
