Russell Coker <[email protected]> writes: > [ 477.971449] ata1.00: status: { DRDY }
IME this means either the disk or the controller is dying. Isolate the fault using SMART self-tests & juggling hardware to see which component the problem stays with. Then replace it. PS: on Transcend MTS400 with link_power_management_policy = min_power, it's because the firmware is bugged. There's no upgrade because the vendor's an uncaring asshat. YMMV. _______________________________________________ luv-main mailing list [email protected] http://lists.luv.asn.au/listinfo/luv-main
