[ 477.971022] ata1.00: exception Emask 0x50 SAct 0xc00 SErr 0x290b02 action
0xe frozen
[ 477.971107] ata1.00: irq_stat 0x01400000, PHY RDY changed
[ 477.971166] ata1: SError: { RecovComm UnrecovData Persist HostInt PHYRdyChg
10B8B BadCRC }
[ 477.971243] ata1.00: failed command: READ FPDMA QUEUED
[ 477.971305] ata1.00: cmd 60/a8:50:00:13:ed/00:00:05:00:00/40 tag 10 ncq
86016 in
[ 477.971308] res 40/00:58:a8:13:ed/00:00:05:00:00/40 Emask 0x50
(ATA bus error)
[ 477.971449] ata1.00: status: { DRDY }
[ 477.971501] ata1.00: failed command: READ FPDMA QUEUED
I was using dd to copy /dev/sda3 to /dev/sdb3 on a system that is usually
running Windows but doesn't appear to have hardware problems. Then I saw the
above message about a READ error on ata1.00 in the kernel log followed
immediately by the below message about a WRITE error on ata2.00. Any ideas
about what might be happening here? I've attached the entire kernel message
log.
[ 477.971763] ata1: hard resetting link
[ 477.971796] ata2.00: exception Emask 0x50 SAct 0x3fffe000 SErr 0x480800
action 0x6 frozen
[ 477.971877] ata2.00: irq_stat 0x08000000, interface fatal error
[ 477.971937] ata2: SError: { HostInt 10B8B Handshk }
[ 477.971994] ata2.00: failed command: WRITE FPDMA QUEUED
[ 477.972082] ata2.00: cmd 61/00:68:00:2c:e7/04:00:05:00:00/40 tag 13 ncq
524288 out
[ 477.972087] res 40/00:68:00:2c:e7/00:00:05:00:00/40 Emask 0x50
(ATA bus error)
[ 477.972233] ata2.00: status: { DRDY }
[ 477.972287] ata2.00: failed command: WRITE FPDMA QUEUED
--
My Main Blog http://etbe.coker.com.au/
My Documents Blog http://doc.coker.com.au/
dmesg.txt.gz
Description: GNU Zip compressed data
_______________________________________________ luv-main mailing list [email protected] http://lists.luv.asn.au/listinfo/luv-main
