Walter mentioned it. And that's the same problem I've had before. On Feb 23, 2015 8:15 PM, "Ryan Coleman" <ryan.cole...@cwis.biz> wrote:
> No one has mentioned that you haven’t stated if you had a Null Modem cable. > > Do you have a Null Modem cable or a simple Pass-through one? > > > On Feb 23, 2015, at 7:08 PM, Jeremy Bennett <jbenn...@hikitechnology.com> > wrote: > > > > I'm trying to get a couple of bricked Alix boards back. > > > > I've got a USB to serial adapter (which has worked in the past), a > Windows 7 computer and Teraterm, but whenever I connect everything up I > just get the cursor blinking at me. > > > > Set the port to 9600, N, 1 as instructions indicate (usb to serial > usually is showing up on COM7). > > > > I've replaced the serial cable with a new one. > > > > I've replaced the USB to serial adapter with a new one (both are > prolific 2303s) > > > > I've tried w/ a WIndows 8 machine as well, but the results are the > same... blinking cursor. > > > > I connected the same stuff to a known good Alix box, and I got the same > result, so I know it isn't the Alixes. > > > > What else can I try? > > > > Mahalo, > > Jeremy > > _______________________________________________ > > pfSense mailing list > > https://lists.pfsense.org/mailman/listinfo/list > > Support the project with Gold! https://pfsense.org/gold > > _______________________________________________ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold >
_______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold