2015-01-29 10:24 GMT-03:00 Vinícius Zavam <[email protected]>: > > > 2015-01-28 6:41 GMT-03:00 WolfSec-Support <[email protected]>: > >> >> 2015-01-27 22:13 GMT+01:00 Chris Buechler <[email protected]>: >> >>> > we have general problems with v2.2 >>> > >>> > I tried to update 13 devices, and only some worked fine (1 ALIX), >>> > and one virtual machine (afterwards crashes see below) >>> > >>> > Most we had problems, e.g: >>> > - looping packet installations without ending - reboot is not solving >>> it >>> >>> In what circumstance? >>> >> >> after launching the amd64 based pfsense to make an upgrade from 2.1.5 to >> v.2.2 via webgui, >> it installs the upgrade, and then reinstalls all packages >> >> this never ends >> >> also a reboot will not solve this / brake package installation loop >> > > +1 > > same thing is happening in here. (didn't reboot) > from 2.1.5 to 2.2; amd64 too. uptime after upgrade? 17 Hours 56 Minutes 34 > Seconds... > > > Intel X5550 Issue under VMware ESXi 5.1 >>> > >>> > - crashes on ALL machines which run under VMware ESXi 5.1 on CPU: >>> >>> There has to be some difference between this and the other outside of >>> the CPU. Some configuration difference, or something. What are you >>> using on these that you aren't on the others? >>> >> >> all use same packages and same plattform, and same sevices: >> >> packages: >> - squid >> - lightsquid >> - open-vm-tools >> - cron >> - autoconfigbackup >> > > nmap, mtr-nox11, sudo, suricata > > >> other vm's with only: >> packages: >> - open-vm-tools >> - cron >> - autoconfigbackup >> >> have same issue >> >> I tested also on different hosts (3x same HP DL 380 G6 with same CPU's) >> > > just one; physical machine... > > same issue >> >> also I thried without any package: >> - crashes >> >> services used: >> - DNS Forwarder >> - OpenVPN >> - Firewall for sure ;) >> - HA >> - Limiters >> > > firewall [LOL], dhcpv4 (+nat, +vlan), dhcpv6 (+vlan), radvd, > openvpn, dns forwarder. > > all worked fine under v2.1.5 >> >> >> >>> >>> The only crashing scenario I've found in release is limiters+HA as >>> noted in the upgrade guide. >>> https://doc.pfsense.org/index.php/Upgrade_Guide >>> >> >> >> uh, may have ignored that fact - yes - limiters & HA >> >> well, question: >> - disabling the limiters would solve this issue in meantime ? >> - or do I have to delete all limiters >> >> but: >> on other CPU under VMware ESX5.1 I have release 2.2 WITH HA AND limiters >> up and running without problems.... >> >> strange.... >> >> so, would help If you anser upper questions - I will do some test here >> >> Many thanks for the helpinng hint >> >> Best regards >> Stephan >> > > system logs? http://pastebin.com/8ni6F2Tb > > PS: suricata is *NOT* working :) > > > -- > Vinícius Zavam >
almost forgot to mention! SSH (with rsa keys) is working, but... vinicius.zavam@egypcio:~ % ssh -6 -l noc -p 22085 2001:aaaa:bbbb:cccc:: Last login: Wed Jan 28 16:26:47 2015 from 2001:aaaa:bbbb:cccc::fb5d export: Command not found. [2.2-RELEASE][[email protected]]/home/noc(1) id uid=2000(noc) gid=65534(nobody) groups=65534(nobody),1999(admins) [2.2-RELEASE][[email protected]]/home/noc(2) su - su: Sorry [2.2-RELEASE][[email protected]]/home/noc(3) sudo su - Shared object "libutil.so.8" not found, required by "sudo" [2.2-RELEASE][[email protected]]/home/noc(4) pkg info The package management tool is not yet installed on your system. Do you want to fetch and install it now? [y/N]: [2.2-RELEASE][[email protected]]/home/noc(5) ls -1 /var/db/pkg bsdinstaller-2.0.2012.1207 gettext-0.18.1.1 iperf-2.0.5 # shouldn't be here, I think; I've deinstalled it long time ago. libiconv-1.14 libpcap-1.2.1 lua-5.1.5_4 mtr-nox11-0.82 nmap-6.01 openssl-1.0.1_10 pcre-8.30_2 pkg-config-0.25_1 [2.2-RELEASE][[email protected]]/home/noc(6) nmap --version Nmap version 6.47 ( http://nmap.org ) Platform: amd64-portbld-freebsd10.0 Compiled with: liblua-5.2.3 openssl-1.0.1g-freebsd libpcre-8.35 libpcap-1.4.0 nmap-libdnet-1.12 ipv6 Compiled without: Available nsock engines: kqueue poll select [2.2-RELEASE][[email protected]]/home/noc(7) mtr --version mtr 0.85 [2.2-RELEASE][[email protected]]/home/noc(8) iperf iperf: Command not found. [2.2-RELEASE][[email protected]]/home/noc(9) whereis iperf whereis: Command not found. PS: a quick test scan with nmap was okay. mtr-nox11 is also in good shape. -- Vinícius Zavam profiles.google.com/egypcio
_______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
