2015-01-28 6:41 GMT-03:00 WolfSec-Support <[email protected]>: > > 2015-01-27 22:13 GMT+01:00 Chris Buechler <[email protected]>: > >> > we have general problems with v2.2 >> > >> > I tried to update 13 devices, and only some worked fine (1 ALIX), >> > and one virtual machine (afterwards crashes see below) >> > >> > Most we had problems, e.g: >> > - looping packet installations without ending - reboot is not solving it >> >> In what circumstance? >> > > after launching the amd64 based pfsense to make an upgrade from 2.1.5 to > v.2.2 via webgui, > it installs the upgrade, and then reinstalls all packages > > this never ends > > also a reboot will not solve this / brake package installation loop >
+1 same thing is happening in here. (didn't reboot) from 2.1.5 to 2.2; amd64 too. uptime after upgrade? 17 Hours 56 Minutes 34 Seconds... > Intel X5550 Issue under VMware ESXi 5.1 >> > >> > - crashes on ALL machines which run under VMware ESXi 5.1 on CPU: >> >> There has to be some difference between this and the other outside of >> the CPU. Some configuration difference, or something. What are you >> using on these that you aren't on the others? >> > > all use same packages and same plattform, and same sevices: > > packages: > - squid > - lightsquid > - open-vm-tools > - cron > - autoconfigbackup > nmap, mtr-nox11, sudo, suricata > other vm's with only: > packages: > - open-vm-tools > - cron > - autoconfigbackup > > have same issue > > I tested also on different hosts (3x same HP DL 380 G6 with same CPU's) > just one; physical machine... same issue > > also I thried without any package: > - crashes > > services used: > - DNS Forwarder > - OpenVPN > - Firewall for sure ;) > - HA > - Limiters > firewall [LOL], dhcpv4 (+nat, +vlan), dhcpv6 (+vlan), radvd, openvpn, dns forwarder. all worked fine under v2.1.5 > > > >> >> The only crashing scenario I've found in release is limiters+HA as >> noted in the upgrade guide. >> https://doc.pfsense.org/index.php/Upgrade_Guide >> > > > uh, may have ignored that fact - yes - limiters & HA > > well, question: > - disabling the limiters would solve this issue in meantime ? > - or do I have to delete all limiters > > but: > on other CPU under VMware ESX5.1 I have release 2.2 WITH HA AND limiters > up and running without problems.... > > strange.... > > so, would help If you anser upper questions - I will do some test here > > Many thanks for the helpinng hint > > Best regards > Stephan > system logs? http://pastebin.com/8ni6F2Tb PS: suricata is *NOT* working :) -- Vinícius Zavam profiles.google.com/egypcio
_______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
