The patch is adding 6 bitmaps, three to PE and three to PHB, to track
the consumed by one particular PE, which can be released once the PE
is destroyed during PCI unplugging time. Also, we're using fixed
quantity of bits to trace the used IO, M32 and M64 segments by PEs
in one particular PHB.
Signed-off-by: Gavin Shan <gws...@linux.vnet.ibm.com>
---
arch/powerpc/platforms/powernv/pci-ioda.c | 29 +++++++++++++++--------------
arch/powerpc/platforms/powernv/pci.h | 18 ++++++++++++++----
2 files changed, 29 insertions(+), 18 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c
b/arch/powerpc/platforms/powernv/pci-ioda.c
index e4ac703..78b49a1 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -388,6 +388,12 @@ static int pnv_ioda_pick_m64_pe(struct pci_bus *bus, bool
all)
list_add_tail(&pe->list, &master_pe->slaves);
}
+ /* M64 segments consumed by slave PEs are tracked
+ * by master PE
+ */
+ set_bit(pe->pe_number, master_pe->m64_segmap);
+ set_bit(pe->pe_number, phb->ioda.m64_segmap);
+
/* P7IOC supports M64DT, which helps mapping M64 segment
* to one particular PE#. However, PHB3 has fixed mapping
* between M64 segment and PE#. In order to have same logic
@@ -2871,9 +2877,11 @@ static void pnv_ioda_setup_pe_seg(struct pci_controller
*hose,
while (index < phb->ioda.total_pe &&
region.start <= region.end) {
- phb->ioda.io_segmap[index] = pe->pe_number;
+ set_bit(index, pe->io_segmap);
+ set_bit(index, phb->ioda.io_segmap);
rc = opal_pci_map_pe_mmio_window(phb->opal_id,
- pe->pe_number, OPAL_IO_WINDOW_TYPE, 0,
index);
+ pe->pe_number, OPAL_IO_WINDOW_TYPE,
+ 0, index);
if (rc != OPAL_SUCCESS) {
pr_err("%s: OPAL error %d when mapping
IO "
"segment #%d to PE#%d\n",
@@ -2896,9 +2904,11 @@ static void pnv_ioda_setup_pe_seg(struct pci_controller
*hose,
while (index < phb->ioda.total_pe &&
region.start <= region.end) {
- phb->ioda.m32_segmap[index] = pe->pe_number;
+ set_bit(index, pe->m32_segmap);
+ set_bit(index, phb->ioda.m32_segmap);
rc = opal_pci_map_pe_mmio_window(phb->opal_id,
- pe->pe_number, OPAL_M32_WINDOW_TYPE, 0,
index);
+ pe->pe_number, OPAL_M32_WINDOW_TYPE,
+ 0, index);
if (rc != OPAL_SUCCESS) {
pr_err("%s: OPAL error %d when mapping
M32 "
"segment#%d to PE#%d",
@@ -3090,7 +3100,7 @@ static void __init pnv_pci_init_ioda_phb(struct
device_node *np,
{
struct pci_controller *hose;
struct pnv_phb *phb;
- unsigned long size, m32map_off, pemap_off, iomap_off = 0;
+ unsigned long size, pemap_off;
const __be64 *prop64;
const __be32 *prop32;
int len;
@@ -3175,19 +3185,10 @@ static void __init pnv_pci_init_ioda_phb(struct
device_node *np,
/* Allocate aux data & arrays. We don't have IO ports on PHB3 */
size = _ALIGN_UP(phb->ioda.total_pe / 8, sizeof(unsigned long));
- m32map_off = size;
- size += phb->ioda.total_pe * sizeof(phb->ioda.m32_segmap[0]);
- if (phb->type == PNV_PHB_IODA1) {
- iomap_off = size;
- size += phb->ioda.total_pe * sizeof(phb->ioda.io_segmap[0]);
- }
pemap_off = size;
size += phb->ioda.total_pe * sizeof(struct pnv_ioda_pe);
aux = memblock_virt_alloc(size, 0);
phb->ioda.pe_alloc = aux;
- phb->ioda.m32_segmap = aux + m32map_off;
- if (phb->type == PNV_PHB_IODA1)
- phb->ioda.io_segmap = aux + iomap_off;
phb->ioda.pe_array = aux + pemap_off;
set_bit(phb->ioda.reserved_pe, phb->ioda.pe_alloc);
diff --git a/arch/powerpc/platforms/powernv/pci.h
b/arch/powerpc/platforms/powernv/pci.h
index 62239b1..08a4e57 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -49,6 +49,15 @@ struct pnv_ioda_pe {
/* PE number */
unsigned int pe_number;
+ /* IO/M32/M64 segments consumed by the PE. Each PE can
+ * have one M64 segment at most, but M64 segments consumed
+ * by slave PEs will be contributed to the master PE. One
+ * PE can own multiple IO and M32 segments.
+ */
+ unsigned long io_segmap[8];
+ unsigned long m32_segmap[8];
+ unsigned long m64_segmap[8];
+
/* "Weight" assigned to the PE for the sake of DMA resource
* allocations
*/
@@ -145,15 +154,16 @@ struct pnv_phb {
unsigned int io_segsize;
unsigned int io_pci_base;
+ /* IO, M32, M64 segment maps */
+ unsigned long io_segmap[8];
+ unsigned long m32_segmap[8];
+ unsigned long m64_segmap[8];
+
/* PE allocation */
struct mutex pe_alloc_mutex;
unsigned long *pe_alloc;
struct pnv_ioda_pe *pe_array;
- /* M32 & IO segment maps */
- unsigned int *m32_segmap;
- unsigned int *io_segmap;
-
/* IRQ chip */
int irq_chip_init;
struct irq_chip irq_chip;
--
2.1.0
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
