On Tue, 2015-04-14 at 15:21 -0500, Scott Wood wrote: > On Tue, 2015-04-14 at 12:55 +0300, Igal.Liberman wrote: > > From: Igal Liberman <igal.liber...@freescale.com> > > > > This patch replaces the following: > > https://patchwork.ozlabs.org/patch/427664/ > > > > This patch is described by the following binding document update: > > https://patchwork.ozlabs.org/patch/461150/ > > > > Signed-off-by: Igal Liberman <igal.liber...@freescale.com> > > --- > > arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi | 6 ++++-- > > 1 file changed, 4 insertions(+), 2 deletions(-) > > > > diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > index 48e0b6e..7e1f074 100644 > > --- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > @@ -49,14 +49,16 @@ global-utilities@e1000 { > > reg = <0x800 0x4>; > > compatible = "fsl,qoriq-core-pll-2.0"; > > clocks = <&sysclk>; > > - clock-output-names = "pll0", "pll0-div2", "pll0-div4"; > > + clock-output-names = "pll0", "pll0-div2", "pll0-div3", > > + "pll0-div4"; > > }; > > pll1: pll1@820 { > > #clock-cells = <1>; > > reg = <0x820 0x4>; > > compatible = "fsl,qoriq-core-pll-2.0"; > > clocks = <&sysclk>; > > - clock-output-names = "pll1", "pll1-div2", "pll1-div4"; > > + clock-output-names = "pll1", "pll1-div2", "pll1-div3", > > + "pll1-div4"; > > Wait, so if the driver implements the binding you submitted, you'll > break compatibility with these older device trees... > > I think we need to just accept the ugly count-the-clock-names approach > and document it.
Is there any current 2.0 clock consumer that references pll-div4? -Scott _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
