This document covers FManv2 and FManv3 mEMAC MDIO
Signed-off-by: Shruti Kanetkar <[email protected]>
---
.../devicetree/bindings/net/fsl-xgmac-phy.txt | 29 ++++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/fsl-xgmac-phy.txt
diff --git a/Documentation/devicetree/bindings/net/fsl-xgmac-phy.txt
b/Documentation/devicetree/bindings/net/fsl-xgmac-phy.txt
new file mode 100644
index 0000000..2f2d56d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl-xgmac-phy.txt
@@ -0,0 +1,29 @@
+*MDIO IO device
+
+The MDIO is a bus to which the PHY devices are connected. For each
+device that exists on this bus, a child node should be created.
+
+Required properties:
+ - compatible: Currently supported strings/devices are:
+ - "fsl,fman-xmdio" (Must be used for 10 Gb/s MDIO from
FMan v2.
+ Can be used for 1/10 Gb/s MDIO from FMan v3)
+ - "fsl,fman-memac-mdio" (Must be used for 1/10 Gb/s
MDIO from
+ FMan v3)
+ - reg
+
+ Example for FMan v2:
+ mdio@f1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-xmdio";
+ reg = <0xf1000 0x1000>;
+ };
+
+ Example for FMan v3:
+
+ mdio@f1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xf1000 0x1000>;
+ }
--
1.8.3.1
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://lists.ozlabs.org/listinfo/linuxppc-dev