On Wed, 2014-03-12 at 16:26 +0800, Zhao Qiang wrote: > Signed-off-by: Zhao Qiang <b45...@freescale.com> > --- > arch/powerpc/boot/dts/t1040rdb.dts | 43 > ++++++++++++++++++++++++++++++++++++++ > 1 file changed, 43 insertions(+)
Presumably this is on top of this patch: http://patchwork.ozlabs.org/patch/314138/ ...since there's no existing t1040 device tree support. Always mention when your patch is on top of a patch that hasn't yet been merged and isn't in the same patch set. At least some of this stuff seems like it should be in t1040si-post.dts (or a file included by it), rather than the board dts. > + tdma: ucc@2000 { > + compatible = "fsl,ucc-tdm"; > + rx-clock-name = "clk3"; > + tx-clock-name = "clk4"; > + fsl,rx-sync-clock = "rsync_pin"; > + fsl,tx-sync-clock = "tsync_pin"; > + fsl,tx-timeslot = <0xfffffffe>; > + fsl,rx-timeslot = <0xfffffffe>; > + fsl,tdm-framer-type = "e1"; > + fsl,tdm-mode = "normal"; > + fsl,tdm-id = <0>; > + fsl,siram-entry-id = <0>; > + }; > + > + serial: ucc@2200 { > + device_type = "serial"; > + compatible = "ucc_uart"; > + port-number = <1>; > + rx-clock-name = "brg2"; > + tx-clock-name = "brg2"; > + }; Missing reg. -Scott _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
