> -----Original Message-----
> From: Zhao Qiang-B45475
> Sent: Wednesday, September 18, 2013 12:55 PM
> To: linuxppc-dev@lists.ozlabs.org
> Cc: Zhao Qiang-B45475; Liu Shengzhou-B36685
> Subject: [PATCH v3] powerpc/p1010rdb-pb:make a new dts for p1010rdb-pb
>
> P1010RDB-PA and P1010RDB-PB boards use different external PHY interrupt
> signals.
> So make a new dts for P1010RDB-PB.
>
> Signed-off-by: Shengzhou Liu <shengzhou....@freescale.com>
> Signed-off-by: Zhao Qiang <b45...@freescale.com>
> ---
> Changes for v2:
> -Remove phy interrupts for p1010rdb-pb
> Changes for v3:
> -Maintain the phy interrupts p1010rdb-pa and make a new device
> tree for p1010rdb-pb
>
> arch/powerpc/boot/dts/p1010rdb-pa.dtsi | 11 ++++++
> arch/powerpc/boot/dts/p1010rdb-pb.dts | 67 ++++++++++++++++++++++++++++++++++
> arch/powerpc/boot/dts/p1010rdb-pb.dtsi | 11 ++++++
> arch/powerpc/boot/dts/p1010rdb.dts | 1 +
> arch/powerpc/boot/dts/p1010rdb.dtsi | 3 --
> arch/powerpc/platforms/85xx/p1010rdb.c | 29 +++++++++++++++
> 6 files changed, 119 insertions(+), 3 deletions(-) create mode 100644
> arch/powerpc/boot/dts/p1010rdb-pa.dtsi
> create mode 100644 arch/powerpc/boot/dts/p1010rdb-pb.dts
> create mode 100644 arch/powerpc/boot/dts/p1010rdb-pb.dtsi
>
Don't touch p1010rdb.c, create two p1010rdb-pa.dts and p1010rdb-pb.dts, which
include the common p1010rdb.dtsi.
Combine original p1010rdb.dts and p1010rdb.dtsi into new p1010rdb.dtsi with
removing compatible part.
Place phy node and following part in p1010rdb-pa.dts and p1010rdb-pb.dts.
/ {
model = "fsl,P1010RDB-PA";
compatible = "fsl,P1010RDB";
}
/ {
model = "fsl,P1010RDB-PB";
compatible = "fsl,P1010RDB";
}
-Shengzhou
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
