From: "Haijun.Zhang" <haijun.zh...@freescale.com>
The p1020rdb-pd has the similar feature as the p1020rdb.
Therefore, p1020rdb-pd use the same platform file as the p1/p2 rdb board.
Overview of P1020RDB-PD platform:
- DDR3 2GB
- NOR flash 64MB
- NAND flash 128MB
- SPI flash 16MB
- I2C EEPROM 256Kb
- eTSEC1 (RGMII PHY) connected to VSC7385 L2 switch
- eTSEC2 (SGMII PHY)
- eTSEC3 (RGMII PHY)
- SDHC
- 2 USB ports
- 4 TDM ports
- PCIe
Signed-off-by: Haijun Zhang <haijun.zh...@freescale.com>
Signed-off-by: Jerry Huang <chang-ming.hu...@freescale.com>
CC: Scott Wood <scottw...@freescale.com>
---
arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index ede8771..53b6fb0 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -160,6 +160,7 @@ machine_arch_initcall(p2020_rdb_pc,
mpc85xx_common_publish_devices);
machine_arch_initcall(p1020_mbg_pc, mpc85xx_common_publish_devices);
machine_arch_initcall(p1020_rdb, mpc85xx_common_publish_devices);
machine_arch_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1020_rdb_pd, mpc85xx_common_publish_devices);
machine_arch_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
machine_arch_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
machine_arch_initcall(p1025_rdb, mpc85xx_common_publish_devices);
@@ -193,6 +194,13 @@ static int __init p1020_rdb_pc_probe(void)
return of_flat_dt_is_compatible(root, "fsl,P1020RDB-PC");
}
+static int __init p1020_rdb_pd_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,P1020RDB-PD");
+}
+
static int __init p1021_rdb_pc_probe(void)
{
unsigned long root = of_get_flat_dt_root();
@@ -351,6 +359,20 @@ define_machine(p1020_rdb_pc) {
.progress = udbg_progress,
};
+define_machine(p1020_rdb_pd) {
+ .name = "P1020RDB-PD",
+ .probe = p1020_rdb_pd_probe,
+ .setup_arch = mpc85xx_rdb_setup_arch,
+ .init_IRQ = mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
+
define_machine(p1024_rdb) {
.name = "P1024 RDB",
.probe = p1024_rdb_probe,
--
1.8.0
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
