Hi,
Jason Cooper <ja...@lakedaemon.net> writes:
>> For instance 6bd98481ab34 (arm: kirkwood: NETGEAR ReadyNAS Duo v2 init
>> PCIe via DT) currently sitting in jcooper/mvebu/pcie_kirkwood removes
>> the PCIE init routine in board-readynas.c, and yours remove ge00
>> init. With both applied, the whole file can go away.
>>
>> AFAICT, this may be the case soon for:
>>
>> arch/arm/mach-kirkwood/board-iconnect.c (36e5722089)
>> arch/arm/mach-kirkwood/board-mplcec4.c (9470fbfb8d)
>> arch/arm/mach-kirkwood/board-nsa310.c (40fa8e5da2)
>> arch/arm/mach-kirkwood/board-readynas.c (6bd98481ab)
>> arch/arm/mach-kirkwood/board-ts219.c (259e234608)
>
> Would you mind putting a patch together (for after v3.10 drops) to do
> this? If you applied Sebastian's series on top of mvebu/pcie_kirkwood,
> that should get you almost there. The last half of his series is going
> in after v3.10...
Something like the quick quilt-generated patch at the end of this email
(done after a dummy merge of Sebastian's set in mvebu/pcie_kirkwood)? I
will take a look at what remains after Sebastian's set hit one of your
branch but I guess he will have included most of what is in the patch to
help you with the merge.
Anyway, at the end here is what DT board files would remain:
$ ls -1 arch/arm/mach-kirkwood/board-*.c
arch/arm/mach-kirkwood/board-dnskw.c
arch/arm/mach-kirkwood/board-dt.c
arch/arm/mach-kirkwood/board-lsxl.c
arch/arm/mach-kirkwood/board-ts219.c
Just one question though: the removal of MACH_*_DT in Kconfig removes
the automatic selection of useful board specific options like
ARM_APPENDED_DTB, ARM_ATAG_DTB_COMPAT, POWER_RESET_RESTART,
POWER_RESET_QNAP. Is that expected?
> You may want to try merging in mvebu/boards and mvebu/soc. Those have
> the changes to use dt for the restart and power-off drivers. That'll
> allow us to empty out a few more board files. mvebu/dt also has a patch
> from Valentin allowing us to remove the keymile board as well.
yes. After a merge w/ mvebu/boards to get restart and poweroff would
allow to get rid of board-ts219.c and board-lsxl.c, leaving mainly
board-dnskw.c.
Cheers,
a+
Index: linux/arch/arm/mach-kirkwood/board-iconnect.c
===================================================================
--- linux.orig/arch/arm/mach-kirkwood/board-iconnect.c 2013-05-30
23:38:53.652311676 +0200
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,15 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-iconnect.c
- *
- * Iomega i-connect Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/of.h>
-#include "common.h"
-
Index: linux/arch/arm/mach-kirkwood/Makefile
===================================================================
--- linux.orig/arch/arm/mach-kirkwood/Makefile 2013-05-30 23:38:53.652311676
+0200
+++ linux/arch/arm/mach-kirkwood/Makefile 2013-05-30 23:38:53.644311636
+0200
@@ -19,9 +19,6 @@
obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
-obj-$(CONFIG_MACH_DB88F628X_BP_DT) += board-db88f628x-bp.o
obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o
obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o
-obj-$(CONFIG_MACH_MPLCEC4_DT) += board-mplcec4.o
-obj-$(CONFIG_MACH_READYNAS_DT) += board-readynas.o
obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o
Index: linux/arch/arm/mach-kirkwood/board-db88f628x-bp.c
===================================================================
--- linux.orig/arch/arm/mach-kirkwood/board-db88f628x-bp.c 2013-05-30
23:38:53.652311676 +0200
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,24 +0,0 @@
-/*
- * Saeed Bishara <sa...@marvell.com>
- *
- * Marvell DB-88F628{1,2}-BP Development Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data db88f628x_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init db88f628x_init(void)
-{
- kirkwood_ge00_init(&db88f628x_ge00_data);
-}
Index: linux/arch/arm/mach-kirkwood/board-mplcec4.c
===================================================================
--- linux.orig/arch/arm/mach-kirkwood/board-mplcec4.c 2013-05-30
23:38:53.652311676 +0200
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2012 MPL AG, Switzerland
- * Stefan Peter <s.pe...@mpl.ch>
- *
- * arch/arm/mach-kirkwood/board-mplcec4.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include "common.h"
-
-void __init mplcec4_init(void)
-{
-}
-
-
-
Index: linux/arch/arm/mach-kirkwood/board-readynas.c
===================================================================
--- linux.orig/arch/arm/mach-kirkwood/board-readynas.c 2013-05-30
23:38:53.652311676 +0200
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,21 +0,0 @@
-/*
- * NETGEAR ReadyNAS Duo v2 Board setup for drivers not already
- * converted to DT.
- *
- * Copyright (C) 2013, Arnaud EBALARD <a...@natisbad.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-
-void __init netgear_readynas_init(void)
-{
-}
Index: linux/arch/arm/mach-kirkwood/common.h
===================================================================
--- linux.orig/arch/arm/mach-kirkwood/common.h 2013-05-30 23:38:53.652311676
+0200
+++ linux/arch/arm/mach-kirkwood/common.h 2013-05-30 23:38:53.648311656
+0200
@@ -55,16 +55,6 @@
void kirkwood_clk_init(void);
/* board init functions for boards not fully converted to fdt */
-#ifdef CONFIG_MACH_DREAMPLUG_DT
-void dreamplug_init(void);
-#else
-static inline void dreamplug_init(void) {};
-#endif
-#ifdef CONFIG_MACH_GURUPLUG_DT
-void guruplug_dt_init(void);
-#else
-static inline void guruplug_dt_init(void) {};
-#endif
#ifdef CONFIG_MACH_TS219_DT
void qnap_dt_ts219_init(void);
#else
@@ -77,94 +67,12 @@
static inline void dnskw_init(void) {};
#endif
-#ifdef CONFIG_MACH_ICONNECT_DT
-void iconnect_init(void);
-#else
-static inline void iconnect_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_IB62X0_DT
-void ib62x0_init(void);
-#else
-static inline void ib62x0_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_DOCKSTAR_DT
-void dockstar_dt_init(void);
-#else
-static inline void dockstar_dt_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_GOFLEXNET_DT
-void goflexnet_init(void);
-#else
-static inline void goflexnet_init(void) {};
-#endif
-
#ifdef CONFIG_MACH_LSXL_DT
void lsxl_init(void);
#else
static inline void lsxl_init(void) {};
#endif
-#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT
-void iomega_ix2_200_init(void);
-#else
-static inline void iomega_ix2_200_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_KM_KIRKWOOD_DT
-void km_kirkwood_init(void);
-#else
-static inline void km_kirkwood_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_DB88F628X_BP_DT
-void db88f628x_init(void);
-#else
-static inline void db88f628x_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_MPLCEC4_DT
-void mplcec4_init(void);
-#else
-static inline void mplcec4_init(void) {};
-#endif
-
-#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \
- defined(CONFIG_MACH_NETSPACE_V2_DT) || \
- defined(CONFIG_MACH_NETSPACE_MAX_V2_DT) || \
- defined(CONFIG_MACH_NETSPACE_LITE_V2_DT) || \
- defined(CONFIG_MACH_NETSPACE_MINI_V2_DT)
-void ns2_init(void);
-#else
-static inline void ns2_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_OPENBLOCKS_A6_DT
-void openblocks_a6_init(void);
-#else
-static inline void openblocks_a6_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_READYNAS_DT
-void netgear_readynas_init(void);
-#else
-static inline void netgear_readynas_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_TOPKICK_DT
-void usi_topkick_init(void);
-#else
-static inline void usi_topkick_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_CLOUDBOX_DT
-void cloudbox_init(void);
-#else
-static inline void cloudbox_init(void) {};
-#endif
-
/* early init functions not converted to fdt yet */
char *kirkwood_id(void);
void kirkwood_l2_init(void);
Index: linux/arch/arm/mach-kirkwood/Kconfig
===================================================================
--- linux.orig/arch/arm/mach-kirkwood/Kconfig 2013-05-30 23:38:53.652311676
+0200
+++ linux/arch/arm/mach-kirkwood/Kconfig 2013-05-30 23:38:53.648311656
+0200
@@ -140,13 +140,6 @@
Say 'Y' here if you want your kernel to support the
Marvell Kirkwood using flattened device tree.
-config MACH_DB88F628X_BP_DT
- bool "Marvell DB-88F628x-BP Development Board (Flattened Device Tree)"
- help
- Say 'Y' here if you want your kernel to support the Marvell
- DB-88F6281-BP and DB-88F6282-BP Development Board (Flattened
- Device Tree).
-
config MACH_DLINK_KIRKWOOD_DT
bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
@@ -163,22 +156,6 @@
Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using
Flattened Device Tree.
-config MACH_MPLCEC4_DT
- bool "MPL CEC4 (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the
- MPL CEC4 (Flattened Device Tree).
-
-config MACH_READYNAS_DT
- bool "NETGEAR ReadyNAS Duo v2 (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- select ARM_APPENDED_DTB
- select ARM_ATAG_DTB_COMPAT
- help
- Say 'Y' here if you want your kernel to support the
- NETGEAR ReadyNAS Duo v2 using Fattened Device Tree.
-
config MACH_TS219_DT
bool "Device Tree for QNAP TS-11X, TS-21X NAS"
select ARCH_KIRKWOOD_DT
Index: linux/arch/arm/configs/kirkwood_defconfig
===================================================================
--- linux.orig/arch/arm/configs/kirkwood_defconfig 2013-05-30
23:38:53.596311398 +0200
+++ linux/arch/arm/configs/kirkwood_defconfig 2013-05-30 23:41:42.293147920
+0200
@@ -32,9 +32,6 @@
CONFIG_MACH_TS41X=y
CONFIG_MACH_DLINK_KIRKWOOD_DT=y
CONFIG_MACH_LSXL_DT=y
-CONFIG_MACH_MPLCEC4_DT=y
-CONFIG_MACH_NSA310_DT=y
-CONFIG_MACH_READYNAS_DT=y
CONFIG_MACH_TS219_DT=y
# CONFIG_CPU_FEROCEON_OLD_ID is not set
CONFIG_PREEMPT=y
Index: linux/arch/arm/mach-kirkwood/board-dt.c
===================================================================
--- linux.orig/arch/arm/mach-kirkwood/board-dt.c 2013-05-30
23:38:53.616311497 +0200
+++ linux/arch/arm/mach-kirkwood/board-dt.c 2013-05-30 23:45:41.782335483
+0200
@@ -113,16 +113,6 @@
if (of_machine_is_compatible("buffalo,lsxl"))
lsxl_init();
- if (of_machine_is_compatible("marvell,db-88f6281-bp") ||
- of_machine_is_compatible("marvell,db-88f6282-bp"))
- db88f628x_init();
-
- if (of_machine_is_compatible("mpl,cec4"))
- mplcec4_init();
-
- if (of_machine_is_compatible("netgear,readynas-duo-v2"))
- netgear_readynas_init();
-
of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
}
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
