[PATCH v5 07/13] ARM: dove: add gigabit ethernet and mvmdio device tree nodes

[Sebastian Hesselbarth]

This patch adds orion-eth and mvmdio device tree nodes for DT enabled
Dove boards. As there is only one ethernet controller on Dove, a default
phy node is also added with a note to set its reg property on a per-board
basis.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselba...@gmail.com>
---
Changelog:
v3->v4:
- convert to new device tree binding

Cc: David Miller <da...@davemloft.net>
Cc: Lennert Buytenhek <buyt...@wantstofly.org>
Cc: Jason Cooper <ja...@lakedaemon.net>
Cc: Andrew Lunn <and...@lunn.ch>
Cc: Benjamin Herrenschmidt <b...@kernel.crashing.org>
Cc: net...@vger.kernel.org
Cc: linux-arm-ker...@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-ker...@vger.kernel.org
---
 arch/arm/boot/dts/dove-cubox.dts |    7 +++++++
 arch/arm/boot/dts/dove.dtsi      |   35 +++++++++++++++++++++++++++++++++++
 2 files changed, 42 insertions(+)

diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 7e3065a..02618fa 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -49,6 +49,13 @@
 &uart0 { status = "okay"; };
 &sata0 { status = "okay"; };
 &i2c0 { status = "okay"; };
+&mdio { status = "okay"; };
+&eth { status = "okay"; };
+
+&ethphy {
+       compatible = "marvell,88e1310";
+       reg = <1>;
+};
 
 &sdio0 {
        status = "okay";
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 6cab468..8612658 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -258,5 +258,40 @@
                                dmacap,xor;
                        };
                };
+
+               mdio: mdio-bus@72004 {
+                       compatible = "marvell,orion-mdio";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0x72004 0x84>;
+                       interrupts = <30>;
+                       clocks = <&gate_clk 2>;
+                       status = "disabled";
+
+                       ethphy: ethernet-phy {
+                               device-type = "ethernet-phy";
+                               /* set phy address in board file */
+                       };
+               };
+
+               eth: ethernet-controller@72000 {
+                       compatible = "marvell,orion-eth";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0x72000 0x4000>;
+                       clocks = <&gate_clk 2>;
+                       marvell,tx-checksum-limit = <1600>;
+                       status = "disabled";
+
+                       ethernet-port@0 {
+                               device_type = "network";
+                               compatible = "marvell,orion-eth-port";
+                               reg = <0>;
+                               interrupts = <29>;
+                               /* overwrite MAC address in bootloader */
+                               local-mac-address = [00 00 00 00 00 00];
+                               phy-handle = <&ethphy>;
+                       };
+               };
        };
 };
-- 
1.7.10.4

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev