On Thu, 2013-05-16 at 06:48 +0000, Bhushan Bharat-R65777 wrote: > 1) Load RCW as Tiejun on some address in DDR. > > 2) Brun RCW at 0xec000000: > protect off 0xec000000 +$filesize; erase 0xec000000 +$filesize; cp.b > 0x1000000 0xec000000 $filesize
Done. > 3) run " pix altbak" command > > 4) check you are on bank4 It stays on bank 0 Also, before I flashed the rcw, I tried messing with SW7[1:4] and got it to book to bank 4 once (I think I changed DIP 2 or 3). Now, after the new RCW is in, it won't boot with any other setting than bank 0 however. Cheers, Ben. > 5) If you are luckier then networking will work for you. > > Thanks > -Bharat > > > > > Tiejun > _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
