On 05/16/2013 02:40 PM, Benjamin Herrenschmidt wrote:
On Thu, 2013-05-16 at 14:35 +0800, tiejun.chen wrote:
On 05/16/2013 02:21 PM, Benjamin Herrenschmidt wrote:
On Thu, 2013-05-16 at 14:17 +0800, tiejun.chen wrote:
I think you can use Bharat's RCW, which seems RR_HXAPNSP_0x36, then
please take
a look at this:
Ok, how do I update my RCW to bse Bharat's ?
Firstly please check which flash bank is used since we have to know where should
be updated RCW.
What is SW7[1:4]?
Or we have another simple way in u-boot prompt:
=> md.b ffdf002c
ffdf002c: 4f 00 fe 00 39 00 00 00 00 00 00 00 00 00 00 00 O...9...........
...
ffdf002c: 0f 00 fe 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
This means we're on bank4.
I assume that means bank0 ?
Yes, RCW should be burned to 0xec000000.
In u-boot prompt:
=> loady
## Ready for binary (ymodem) download to 0x01000000 at 115200 bps...
C
Then send that RCW with ymodem in your terminal client.
Tiejun
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
