From: Zhicheng Fan <b32...@freeescale.com>
Signed-off-by: Zhicheng Fan <b32...@freeescale.com>
---
arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 80 ++++++++++++++++++++++++++++-
1 files changed, 79 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index 1950076..4c27b3b 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -26,6 +26,9 @@
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/mpic.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+#include <asm/fsl_guts.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
@@ -47,6 +50,10 @@ void __init mpc85xx_rdb_pic_init(void)
struct mpic *mpic;
unsigned long root = of_get_flat_dt_root();
+#ifdef CONFIG_QUICC_ENGINE
+ struct device_node *np;
+#endif
+
if (of_flat_dt_is_compatible(root, "fsl,MPC85XXRDB-CAMP")) {
mpic = mpic_alloc(NULL, 0,
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
@@ -62,6 +69,18 @@ void __init mpc85xx_rdb_pic_init(void)
BUG_ON(mpic == NULL);
mpic_init(mpic);
+
+#ifdef CONFIG_QUICC_ENGINE
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+ if (np) {
+ qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
+ qe_ic_cascade_high_mpic);
+ of_node_put(np);
+
+ } else
+ pr_err("Could not find qe-ic node\n");
+#endif
+
}
/*
@@ -69,7 +88,7 @@ void __init mpc85xx_rdb_pic_init(void)
*/
static void __init mpc85xx_rdb_setup_arch(void)
{
-#ifdef CONFIG_PCI
+#if defined(CONFIG_PCI) || defined(CONFIG_QUICC_ENGINE)
struct device_node *np;
#endif
@@ -85,6 +104,65 @@ static void __init mpc85xx_rdb_setup_arch(void)
#endif
mpc85xx_smp_init();
+
+#ifdef CONFIG_QUICC_ENGINE
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!np) {
+ pr_err("Could not find Quicc Engine node\n");
+ goto qe_fail;
+ }
+
+ qe_reset();
+ of_node_put(np);
+
+ np = of_find_node_by_name(NULL, "par_io");
+ if (np) {
+ struct device_node *ucc;
+
+ par_io_init(np);
+ of_node_put(np);
+
+ for_each_node_by_name(ucc, "ucc")
+ par_io_of_config(ucc);
+
+ }
+ if (machine_is(p1025_rdb)) {
+
+ __be32 __iomem *pmuxcr;
+
+ np = of_find_node_by_name(NULL, "global-utilities");
+
+ if (np) {
+ pmuxcr = of_iomap(np, 0) + MPC85xx_PMUXCR_OFFSET;
+
+ if (!pmuxcr)
+ pr_err(KERN_EMERG "Error: Alternate function"
+ " signal multiplex control register not"
+ " mapped!\n");
+ else {
+#if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE)
+ /* P1025 has pins muxed for QE and other functions. To
+ * enable QE UEC mode, we need to set bit QE0 for UCC1
+ * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
+ * and QE12 for QE MII management singals in PMUXCR
+ * register.
+ */
+ setbits32(pmuxcr, MPC85xx_PMUXCR_QE0 |
+ MPC85xx_PMUXCR_QE3 |
+ MPC85xx_PMUXCR_QE9 |
+ MPC85xx_PMUXCR_QE12);
+#endif
+ }
+
+ iounmap(pmuxcr);
+ of_node_put(np);
+ }
+
+ }
+
+qe_fail:
+#endif /* CONFIG_QUICC_ENGINE */
+
printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n");
}
--
1.7.0.4
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
