It appears that on the Chroma card, the class code of the root
complex is still wrong even on DD2 or later chips. This could
be a firmware issue, but that breaks resource allocation so let's
unconditionally fix it up.
Signed-off-by: Benjamin Herrenschmidt <b...@kernel.crashing.org>
---
arch/powerpc/platforms/wsp/wsp_pci.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/platforms/wsp/wsp_pci.c
b/arch/powerpc/platforms/wsp/wsp_pci.c
index e0262cd..d24b3ac 100644
--- a/arch/powerpc/platforms/wsp/wsp_pci.c
+++ b/arch/powerpc/platforms/wsp/wsp_pci.c
@@ -468,15 +468,15 @@ static void __init wsp_pcie_configure_hw(struct
pci_controller *hose)
#define DUMP_REG(x) \
pr_debug("%-30s : 0x%016llx\n", #x, in_be64(hose->cfg_data + x))
-#ifdef CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS
- /* WSP DD1 has a bogus class code by default in the PCI-E
- * root complex's built-in P2P bridge */
+ /*
+ * Some WSP variants has a bogus class code by default in the PCI-E
+ * root complex's built-in P2P bridge
+ */
val = in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1);
pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", val);
out_be64(hose->cfg_data + PCIE_REG_SYS_CFG1,
(val & ~PCIE_REG_SYS_CFG1_CLASS_CODE) | (PCI_CLASS_BRIDGE_PCI
<< 8));
pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", in_be64(hose->cfg_data +
PCIE_REG_SYS_CFG1));
-#endif /* CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS */
#ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
/* XXX Disable TCE caching, it doesn't work on DD1 */
--
1.7.7.3
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
