Add a 5121-custom reject if an input-only pin is requested to be output
(see 18.3.1.1 in the refman). Also, rewrite mach-specific quirk setup to
consume less lines which scales better.
Signed-off-by: Wolfram Sang <w.s...@pengutronix.de>
---
drivers/gpio/gpio-mpc8xxx.c | 17 ++++++++++++-----
1 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
index ec3fcf0..25dc736 100644
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -115,6 +115,14 @@ static int mpc8xxx_gpio_dir_in(struct gpio_chip *gc,
unsigned int gpio)
return 0;
}
+static int mpc5121_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int
val)
+{
+ /* GPIO 28..31 are input only on MPC5121 */
+ if (gpio >= 28)
+ return -EINVAL;
+
+ return mpc8xxx_gpio_dir_out(gc, gpio, val);
+}
static int mpc8xxx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int
val)
{
struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
@@ -340,11 +348,10 @@ static void __init mpc8xxx_add_controller(struct
device_node *np)
mm_gc->save_regs = mpc8xxx_gpio_save_regs;
gc->ngpio = MPC8XXX_GPIO_PINS;
gc->direction_input = mpc8xxx_gpio_dir_in;
- gc->direction_output = mpc8xxx_gpio_dir_out;
- if (of_device_is_compatible(np, "fsl,mpc8572-gpio"))
- gc->get = mpc8572_gpio_get;
- else
- gc->get = mpc8xxx_gpio_get;
+ gc->direction_output = of_device_is_compatible(np, "fsl,mpc5121-gpio") ?
+ mpc5121_gpio_dir_out : mpc8xxx_gpio_dir_out;
+ gc->get = of_device_is_compatible(np, "fsl,mpc8572-gpio") ?
+ mpc8572_gpio_get : mpc8xxx_gpio_get;
gc->set = mpc8xxx_gpio_set;
gc->to_irq = mpc8xxx_gpio_to_irq;
--
1.7.7.1
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
