> -----Original Message----- > From: Mitch Bradley [mailto:w...@firmworks.com] > > I would be tempted to add another level of hierarchy as a container for > the two FPEs on CS2. >
Hi, Mitch. As a long time Forth(er), I'm somewhat honoured to have this exchange with you 8-) Do you mean something like this???? localbus@ffe124000 { compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus"; reg = <0xf 0xfe124000 0 0x1000>; interrupts = <25 2 0 0>; interrupt-parent = <&mpic>; #address-cells = <2>; #size-cells = <1>; /* Local bus region mappings */ ranges = <0 0 0xf 0xe8000000 0x08000000 /* CS0: Boot flash */ 1 0 0xf 0xd0000000 0x7fff /* CS1: FPGA0 - LIM */ 2 0 0xf 0xd1000000 0x7fff /* CS2: FPGA1 - FPE1 */ 2 1 0xf 0xd2000000 0x7fff >; /* CS2: FPGA2 - FPE2 */ flash@0,0 { compatible = "cfi-flash"; reg = <0 0 0x08000000>; bank-width = <2>; device-width = <2>; #size-cells = <1>; #address-cells = <1>; partition@0 { label = "rcw"; reg = <0x0 0x20000>; read-only; }; partition@40000 { label = "saveenv"; reg = <0x40000 0x20000>; }; partition@7000000 { label = "fman-firmware"; reg = <0x7000000 0x20000>; read-only; }; partition@7f80000 { label = "u-boot"; reg = <0x7f80000 0x80000>; read-only; }; }; lim: fpga@1, { } nitro: daughtercard@2 { fpe1: fpga@2,0 { } fpe2: fpga@2,1 { } } } _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev