Split the P1020 SoC device tree into what we can include as a 'prefix'
to the board device tree and what needs to be included as a 'postfix'.
This allows use more re-use and less duplication between various board
device tree configurations (32-bit address map vs 36-bit address map).
Signed-off-by: Kumar Gala <ga...@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p1020si-post.dtsi | 229 +++++++++++++++
arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi | 68 +++++
arch/powerpc/boot/dts/p1020si.dtsi | 407 ---------------------------
3 files changed, 297 insertions(+), 407 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
delete mode 100644 arch/powerpc/boot/dts/p1020si.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
new file mode 100644
index 0000000..74538a4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
@@ -0,0 +1,229 @@
+/*
+ * P1020/P1011 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+&pci0 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1
+ >;
+ };
+};
+
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1020-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1020-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1020-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ i2c0: i2c@3000 {
+ };
+
+ i2c1: i2c@3100 {
+ };
+
+ serial0: serial@4500 {
+ };
+
+ serial1: serial@4600 {
+ };
+
+ spi0: spi@7000 {
+ };
+
+ gpio0: gpio-controller@f000 {
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1020-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+ dma0: dma@21300 {
+ };
+
+ mdio0: mdio@24000 {
+ };
+
+ mdio1: mdio@25000 {
+ };
+
+ mdio2: mdio@26000 {
+ };
+
+ enet0: ethernet@b0000 {
+ };
+
+ enet1: ethernet@b1000 {
+ };
+
+ enet2: ethernet@b2000 {
+ };
+
+ usb@22000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-usb2-dr";
+ reg = <0x22000 0x1000>;
+ interrupts = <28 0x2 0 0>;
+ };
+
+ /* USB2 is shared with localbus, so it must be disabled
+ by default. We can't put 'status = "disabled";' here
+ since U-Boot doesn't clear the status property when
+ it enables USB2. OTOH, U-Boot does create a new node
+ when there isn't any. So, just comment it out.
+ usb@23000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-usb2-dr";
+ reg = <0x23000 0x1000>;
+ interrupts = <46 0x2 0 0>;
+ phy_type = "ulpi";
+ };
+ */
+
+ sdhc0: sdhc@2e000 {
+ };
+
+ crypto: crypto@30000 {
+ };
+
+ mpic: pic@40000 {
+ };
+
+ timerA: timer@41100 {
+ };
+
+ timerB: timer@42100 {
+ };
+
+ msiA: msi@41600 {
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1020-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+/include/ "pq3-etsec2-0.dtsi"
+/include/ "pq3-etsec2-1.dtsi"
+/include/ "pq3-etsec2-2.dtsi"
+/include/ "pq3-gpio-0.dtsi"
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+/include/ "pq3-sec3.3-0.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
new file mode 100644
index 0000000..6f0376e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * P1020/P1011 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1020";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1020@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1020@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi
b/arch/powerpc/boot/dts/p1020si.dtsi
deleted file mode 100644
index b08c848..0000000
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * P1020si Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
- compatible = "fsl,P1020";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1020@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P1020@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
-
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2 0 0>;
- };
-
- soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1020-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1020-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2 0 0>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1020-memory-controller";
- reg = <0x2000 0x1000>;
- interrupts = <16 2 0 0>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- spi@7000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p1020-espi", "fsl,mpc8536-espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2 0 0>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1020-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2,256K
- interrupts = <16 2 0 0>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <20 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <21 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <22 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <23 2 0 0>;
- };
- };
-
- mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
-
- };
-
- mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x25000 0x1000 0xb1030 0x4>;
-
- };
-
- enet0: ethernet@b0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- fsl,magic-packet;
- local-mac-address = [ 00 00 00 00 00 00 ];
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb0000 0x1000>;
- interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
- };
-
- queue-group@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb4000 0x1000>;
- interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
- };
- };
-
- enet1: ethernet@b1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- fsl,magic-packet;
- local-mac-address = [ 00 00 00 00 00 00 ];
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb1000 0x1000>;
- interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
- };
-
- queue-group@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb5000 0x1000>;
- interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
- };
- };
-
- enet2: ethernet@b2000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- fsl,magic-packet;
- local-mac-address = [ 00 00 00 00 00 00 ];
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb2000 0x1000>;
- interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
- };
-
- queue-group@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb6000 0x1000>;
- interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>;
- };
- };
-
- usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupts = <28 0x2 0 0>;
- };
-
- /* USB2 is shared with localbus, so it must be disabled
- by default. We can't put 'status = "disabled";' here
- since U-Boot doesn't clear the status property when
- it enables USB2. OTOH, U-Boot does create a new node
- when there isn't any. So, just comment it out.
- usb@23000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x23000 0x1000>;
- interrupts = <46 0x2 0 0>;
- phy_type = "ulpi";
- };
- */
-
- sdhci@2e000 {
- compatible = "fsl,p1020-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2 0 0>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
- "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
- "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 0 0 58 2 0 0>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x97c>;
- fsl,descriptor-types-mask = <0x3a30abf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- timer@41100 {
- compatible = "fsl,mpic-global-timer";
- reg = <0x41100 0x100 0x41300 4>;
- interrupts = <0 0 3 0
- 1 0 3 0
- 2 0 3 0
- 3 0 3 0>;
- };
-
- timer@42100 {
- compatible = "fsl,mpic-global-timer";
- reg = <0x42100 0x100 0x42300 4>;
- interrupts = <4 0 3 0
- 5 0 3 0
- 6 0 3 0
- 7 0 3 0>;
- };
-
- msi@41600 {
- compatible = "fsl,p1020-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1020-guts","fsl,p2020-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- };
-
- };
-
- pci1: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
-
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
- };
- };
-};
--
1.7.3.4
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
