Vineeth wrote: > Hi, > > We are trying to port linux 2.6.38 on MPC7410 based board (This is a > preparatory design by our customer) > > System architecture is as follows, > > MPC7410 <=> MPC107 <=> PCI_to_LOCAL(plx9052) <=> UART
MPCXXX should be compatible with TSIXXX. So you can refer to mpc7448_hpc2. > > Previously we were using ppc architecture and we had some issues with > page_init() functions; which may be because of our configuration.As we didnt > get much support on ppc architecture we moved to powerpc. > > Now we moved to powerpc architecture. We have some doubts on writing the dts > file. Please find the dts file attached. > > when we checked the legacy_serial.c file, we found that > legacy_serial_parents not expecting a pci-local or a pci bridge as parent. > is our understanding correct ? should we introduce a new pci parent in that > structure ? So you can understand this after refer to the file, arch/powerpc/boot/dts/mpc7448hpc2.dts. Tiejun > > We are confused about writing the ranges property of PCI node.we were > referring booting_without_of doc but didnt get much info. Is there any file > which gives better idea about the ranges property ? > > Thanks > Vineeth _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
