update ecc_stats.corrected if LTECCR register is available.
v2: kernel standard C formatting
Signed-off-by: Michael Hench <michaelhe...@gmail.com>
---
diff -purN orig/drivers/mtd/nand/fsl_elbc_nand.c
linux-3.0/drivers/mtd/nand/fsl_elbc_nand.c
--- orig/drivers/mtd/nand/fsl_elbc_nand.c 2011-07-25 14:50:56.838326055
-0500
+++ linux-3.0/drivers/mtd/nand/fsl_elbc_nand.c 2011-07-25
14:48:35.680940052 -0500
@@ -256,6 +256,25 @@ static int fsl_elbc_run_command(struct m
return -EIO;
}
+ if (chip->ecc.mode != NAND_ECC_HW)
+ return 0;
+
+ if (elbc_fcm_ctrl->read_bytes == mtd->writesize + mtd->oobsize) {
+ uint32_t lteccr = in_be32(&lbc->lteccr);
+ /*
+ * if command was a full page read and the ELBC
+ * has the LTECCR register, then bits 12-15 (ppc order) of
+ * LTECCR indicate which 512 byte sub-pages had corrected
errors.
+ * bits 28-31 are uncorrectable errors, marked elsewhere.
+ * for small page nand only 1 bit is used.
+ * if the ELBC doesn't have the lteccr register it reads 0
+ */
+ if(lteccr & 0x000F000F)
+ out_be32(&lbc->lteccr, 0x000F000F); /* clear lteccr */
+ if(lteccr & 0x000F0000)
+ mtd->ecc_stats.corrected++;
+ }
+
return 0;
}
--
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
