On Mon, 2011-06-27 at 06:31 -0500, Ayman El-Khashab wrote: > That was my initial thought as well, but I wasn't versed > enough in the pci magic in order to completely figure it > out. > > Here is the output, it is dmesg, iomem, then ioports for the > passing and then the failing cases.
Ok, I can see some resource allocation errors in the log, I don't have enough active brain cells left today to figure out what's going on but I'll have a look tomorrow. Cheers, Ben. > thanks > ayman > > ============== Passing ====================== > > Using PowerPC 44x Platform machine description > Linux version 2.6.36-rc3-00186-g0e52247-dirty (aymane@lablinux) (gcc version > 4.2.2) #18 Sat Jun 25 13:51:44 CDT 2011 > Found initrd at 0xdfa5c000:0xdfe4cbfa > Found legacy serial port 0 for /plb/opb/serial@ef600300 > mem=4ef600300, taddr=4ef600300, irq=0, clk=6451612, speed=0 > Found legacy serial port 1 for /plb/opb/serial@ef600400 > mem=4ef600400, taddr=4ef600400, irq=0, clk=6451612, speed=0 > Top of RAM: 0x20000000, Total RAM: 0x20000000 > Memory hole size: 0MB > Zone PFN ranges: > DMA 0x00000000 -> 0x00020000 > Normal empty > HighMem empty > Movable zone start PFN for each node > early_node_map[1] active PFN ranges > 0: 0x00000000 -> 0x00020000 > On node 0 totalpages: 131072 > free_area_init_node: node 0, pgdat c03b9f48, node_mem_map c03ed000 > DMA zone: 1024 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 130048 pages, LIFO batch:31 > MMU: Allocated 1088 bytes of context maps for 255 contexts > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 > Kernel command line: root=/dev/ram rw mem=512M > ip=169.254.0.180:169.254.0.100:169.254.0.100:255.255.255.0:tanosx:eth0:off > panic=1 console=ttyS0,57600 > PID hash table entries: 2048 (order: 1, 8192 bytes) > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > High memory: 0k > Memory: 511668k/524288k available (3692k kernel code, 12620k reserved, 176k > data, 141k bss, 184k init) > Kernel virtual memory layout: > * 0xfffcf000..0xfffff000 : fixmap > * 0xffc00000..0xffe00000 : highmem PTEs > * 0xffa00000..0xffc00000 : consistent mem > * 0xffa00000..0xffa00000 : early ioremap > * 0xe1000000..0xffa00000 : vmalloc & ioremap > SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > NR_IRQS:512 > UIC0 (32 IRQ sources) at DCR 0xc0 > UIC1 (32 IRQ sources) at DCR 0xd0 > irq: irq 30 on host /interrupt-controller0 mapped to virtual irq 30 > UIC2 (32 IRQ sources) at DCR 0xe0 > irq: irq 10 on host /interrupt-controller0 mapped to virtual irq 16 > UIC3 (32 IRQ sources) at DCR 0xf0 > irq: irq 16 on host /interrupt-controller0 mapped to virtual irq 17 > time_init: decrementer frequency = 800.000010 MHz > time_init: processor frequency = 800.000010 MHz > clocksource: timebase mult[500000] shift[22] registered > clockevent: decrementer mult[ccccccf7] shift[32] cpu[0] > pid_max: default: 32768 minimum: 301 > Mount-cache hash table entries: 512 > NET: Registered protocol family 16 > i2c-core: driver [dummy] registered > irq: irq 11 on host /interrupt-controller1 mapped to virtual irq 18 > 256k L2-cache enabled > PCIE0: Checking link... > PCIE0: No device detected. > PCI host bridge /plb/pciex@d00000000 (primary) ranges: > MEM 0x0000000e00000000..0x0000000e7fffffff -> 0x0000000080000000 > MEM 0x0000000f00000000..0x0000000f000fffff -> 0x0000000000000000 > IO 0x0000000f80000000..0x0000000f8000ffff -> 0x0000000000000000 > Removing ISA hole at 0x0000000f00000000 > 4xx PCI DMA offset set to 0x00000000 > /plb/pciex@d00000000: Legacy ISA memory support enabled > PCIE0: successfully set as root-complex > PCIE1: Checking link... > PCIE1: Device detected, waiting for link... > PCIE1: link is up ! > PCI host bridge /plb/pciex@d20000000 (primary) ranges: > MEM 0x0000000e80000000..0x0000000effffffff -> 0x0000000080000000 > MEM 0x0000000f00100000..0x0000000f001fffff -> 0x0000000000000000 > IO 0x0000000f80010000..0x0000000f8001ffff -> 0x0000000000000000 > Removing ISA hole at 0x0000000f00100000 > 4xx PCI DMA offset set to 0x00000000 > /plb/pciex@d20000000: Legacy ISA memory support enabled > PCIE1: successfully set as root-complex > PCI host bridge /plb/pci@c0ec00000 (primary) ranges: > MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000 > MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000 > IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000 > Removing ISA hole at 0x0000000c0ee00000 > 4xx PCI DMA offset set to 0x00000000 > /plb/pci@c0ec00000: Legacy ISA memory support enabled > PCI: Probing PCI hardware > pci_bus 0000:40: scanning bus > pci 0000:40:00.0: found [aaa0:bed0] class 000604 header type 01 > pci 0000:40:00.0: reg 10: [mem 0x00000000-0x7fffffff pref] > pci_bus 0000:40: fixups for bus > pci 0000:40:00.0: scanning [bus 41-7f] behind bridge, pass 0 > pci_bus 0000:41: scanning bus > pci_bus 0000:41: fixups for bus > pci 0000:40:00.0: PCI bridge to [bus 41-7f] > pci 0000:40:00.0: bridge window [io 0x0000-0x0000] (disabled) > pci 0000:40:00.0: bridge window [mem 0x00000000-0x000fffff] (disabled) > pci 0000:40:00.0: bridge window [mem 0x00000000-0x000fffff pref] (disabled) > pci_bus 0000:41: bus scan returning with max=41 > pci 0000:40:00.0: scanning [bus 41-7f] behind bridge, pass 1 > pci_bus 0000:40: bus scan returning with max=7f > pci_bus 0001:80: scanning bus > pci 0001:80:00.0: found [aaa1:bed1] class 000604 header type 01 > pci 0001:80:00.0: reg 10: [mem 0x00000000-0x7fffffff pref] > pci_bus 0001:80: fixups for bus > pci 0001:80:00.0: scanning [bus 81-bf] behind bridge, pass 0 > pci_bus 0001:81: scanning bus > pci 0001:81:00.0: found [1095:3531] class 000180 header type 00 > pci 0001:81:00.0: reg 10: [mem 0x00000000-0x0000007f 64bit] > pci 0001:81:00.0: reg 18: [mem 0x00000000-0x00001fff 64bit] > pci 0001:81:00.0: reg 20: [io 0x0000-0x007f] > pci 0001:81:00.0: supports D1 D2 > pci_bus 0001:81: fixups for bus > pci 0001:80:00.0: PCI bridge to [bus 81-bf] > pci 0001:80:00.0: bridge window [io 0x0000-0x0000] (disabled) > pci 0001:80:00.0: bridge window [mem 0x00000000-0x000fffff] (disabled) > pci 0001:80:00.0: bridge window [mem 0x00000000-0x000fffff pref] (disabled) > irq: irq 16 on host /interrupt-controller3 mapped to virtual irq 19 > pci_bus 0001:81: bus scan returning with max=81 > pci 0001:80:00.0: scanning [bus 81-bf] behind bridge, pass 1 > pci_bus 0001:80: bus scan returning with max=bf > pci_bus 0002:00: scanning bus > pci_bus 0002:00: fixups for bus > pci_bus 0002:00: bus scan returning with max=00 > pci 0000:40:00.0: BAR 0: can't assign mem pref (size 0x80000000) > pci 0000:40:00.0: PCI bridge to [bus 41-7f] > pci 0000:40:00.0: bridge window [io disabled] > pci 0000:40:00.0: bridge window [mem disabled] > pci 0000:40:00.0: bridge window [mem pref disabled] > pci 0001:80:00.0: BAR 0: can't assign mem pref (size 0x80000000) > pci 0001:80:00.0: BAR 8: assigned [mem 0xe80000000-0xe800fffff] > pci 0001:80:00.0: BAR 7: assigned [io 0xfffe1000-0xfffe1fff] > pci 0001:81:00.0: BAR 2: assigned [mem 0xe80000000-0xe80001fff 64bit] > pci 0001:81:00.0: BAR 2: set to [mem 0xe80000000-0xe80001fff 64bit] (PCI > address [0x80000000-0x80001fff] > pci 0001:81:00.0: BAR 0: assigned [mem 0xe80002000-0xe8000207f 64bit] > pci 0001:81:00.0: BAR 0: set to [mem 0xe80002000-0xe8000207f 64bit] (PCI > address [0x80002000-0x8000207f] > pci 0001:81:00.0: BAR 4: assigned [io 0xfffe1000-0xfffe107f] > pci 0001:81:00.0: BAR 4: set to [io 0xfffe1000-0xfffe107f] (PCI address > [0x1000-0x107f] > pci 0001:80:00.0: PCI bridge to [bus 81-bf] > pci 0001:80:00.0: bridge window [io 0xfffe1000-0xfffe1fff] > pci 0001:80:00.0: bridge window [mem 0xe80000000-0xe800fffff] > pci 0001:80:00.0: bridge window [mem pref disabled] > pci_bus 0000:40: resource 0 [io 0xfffc0000-0xfffcffff] > pci_bus 0000:40: resource 1 [mem 0xe00000000-0xe7fffffff] > pci_bus 0001:80: resource 0 [io 0xfffe0000-0xfffeffff] > pci_bus 0001:80: resource 1 [mem 0xe80000000-0xeffffffff] > pci_bus 0001:81: resource 0 [io 0xfffe1000-0xfffe1fff] > pci_bus 0001:81: resource 1 [mem 0xe80000000-0xe800fffff] > pci_bus 0002:00: resource 0 [io 0x0000-0xffff] > pci_bus 0002:00: resource 1 [mem 0xd80000000-0xdffffffff] > bio: create slab <bio-0> at 0 > i2c-core: driver [pcf857x] registered > vgaarb: loaded > SCSI subsystem initialized > libata version 3.00 loaded. > Switching to clocksource timebase > NET: Registered protocol family 2 > IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > TCP established hash table entries: 16384 (order: 5, 131072 bytes) > TCP bind hash table entries: 16384 (order: 4, 65536 bytes) > TCP: Hash tables configured (established 16384 bind 16384) > TCP reno registered > UDP hash table entries: 256 (order: 0, 4096 bytes) > UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) > NET: Registered protocol family 1 > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > RPC: Registered tcp NFSv4.1 backchannel transport module. > Trying to unpack rootfs image as initramfs... > rootfs image is not initramfs (no cpio magic); looks like an initrd > Freeing initrd memory: 4034k freed > irq: irq 1 on host /interrupt-controller1 mapped to virtual irq 20 > irq: irq 1 on host /interrupt-controller0 mapped to virtual irq 21 > irq: irq 29 on host /interrupt-controller0 mapped to virtual irq 29 > irq: irq 6 on host /interrupt-controller2 mapped to virtual irq 22 > irq: irq 7 on host /interrupt-controller2 mapped to virtual irq 23 > irq: irq 3 on host /interrupt-controller2 mapped to virtual irq 24 > irq: irq 4 on host /interrupt-controller2 mapped to virtual irq 25 > irq: irq 5 on host /interrupt-controller2 mapped to virtual irq 26 > irq: irq 29 on host /interrupt-controller2 mapped to virtual irq 27 > irq: irq 30 on host /interrupt-controller2 mapped to virtual irq 28 > irq: irq 28 on host /interrupt-controller2 mapped to virtual irq 31 > irq: irq 26 on host /interrupt-controller1 mapped to virtual irq 32 > irq: irq 12 on host /interrupt-controller0 mapped to virtual irq 33 > irq: irq 0 on host /interrupt-controller3 mapped to virtual irq 34 > irq: irq 5 on host /interrupt-controller3 mapped to virtual irq 35 > irq: irq 6 on host /interrupt-controller1 mapped to virtual irq 36 > irq: irq 2 on host /interrupt-controller0 mapped to virtual irq 37 > irq: irq 3 on host /interrupt-controller0 mapped to virtual irq 38 > irq: irq 16 on host /interrupt-controller2 mapped to virtual irq 39 > irq: irq 20 on host /interrupt-controller2 mapped to virtual irq 40 > irq: irq 17 on host /interrupt-controller2 mapped to virtual irq 41 > irq: irq 21 on host /interrupt-controller2 mapped to virtual irq 42 > msgmni has been set to 1007 > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) > io scheduler noop registered > io scheduler deadline registered > io scheduler cfq registered (default) > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled > serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 20) is a U6_16550A > console [ttyS0] enabled > serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 21) is a U6_16550A > 4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 20) is a 16550 > 4ef600400.serial: ttyS1 at MMIO 0x4ef600400 (irq = 21) is a 16550 > brd: module loaded > i2c-core: driver [at24] registered > sata_sil24 0001:81:00.0: version 1.1 > sata_sil24 0001:81:00.0: enabling device (0000 -> 0003) > sata_sil24 0001:81:00.0: enabling bus mastering > scsi0 : sata_sil24 > ata1: SATA max UDMA/100 host m128@0xe80002000 port 0xe80000000 irq 19 > PPC 4xx OCP EMAC driver, version 3.54 > MAL v2 /plb/mcmal, 2 TX channels, 16 RX channels > ZMII /plb/opb/emac-zmii@ef600d00 initialized > RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support > TAH /plb/opb/emac-tah@ef601350 initialized > TAH /plb/opb/emac-tah@ef601450 initialized > /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode > eth0: EMAC-0 /plb/opb/ethernet@ef600e00, MAC 00:10:ec:01:02:b9 > eth0: found Generic MII PHY (0x00) > /plb/opb/emac-rgmii@ef601500: input 1 in RGMII mode > eth1: EMAC-1 /plb/opb/ethernet@ef600f00, MAC 00:10:ec:81:02:b9 > eth1: found Generic MII PHY (0x01) > i2c /dev entries driver > i2c-core: driver [dev_driver] registered > of:ibm-iic 4ef600700.i2c: clckdiv = 9 > i2c i2c-0: adapter [IBM IIC] registered > irq: irq 25 on host /interrupt-controller2 mapped to virtual irq 43 > i2c 0-0068: uevent > i2c i2c-0: client [m41t80] registered with bus id 0-0068 > irq: irq 20 on host /interrupt-controller1 mapped to virtual irq 44 > i2c 0-0048: uevent > i2c i2c-0: client [ad7414] registered with bus id 0-0048 > i2c-dev: adapter [IBM IIC] registered as minor 0 > of:ibm-iic 4ef600700.i2c: using standard (100 kHz) mode > of:ibm-iic 4ef600800.i2c: clckdiv = 9 > i2c i2c-1: adapter [IBM IIC] registered > i2c-dev: adapter [IBM IIC] registered as minor 1 > of:ibm-iic 4ef600800.i2c: using standard (100 kHz) mode > Netfilter messages via NETLINK v0.30. > nf_conntrack version 0.5.0 (8057 buckets, 32228 max) > ctnetlink v0.93: registering with nfnetlink. > xt_time: kernel timezone is -0000 > IPVS: Registered protocols () > IPVS: Connection hash table configured (size=4096, memory=32Kbytes) > IPVS: ipvs loaded. > ip_tables: (C) 2000-2006 Netfilter Core Team > ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully > arp_tables: (C) 2002 David S. Miller > TCP cubic registered > NET: Registered protocol family 17 > Bridge firewalling registered > Ebtables v2.0 registered > eth0: link is down > IP-Config: Complete: > device=eth0, addr=169.254.0.180, mask=255.255.255.0, gw=169.254.0.100, > host=tanosx, domain=, nis-domain=(none), > bootserver=169.254.0.100, rootserver=169.254.0.100, rootpath= > ata1: SATA link down (SStatus 0 SControl 0) > RAMDISK: gzip image found at block 0 > eth0: link is up, 100 FDX, pause enabled > VFS: Mounted root (ext2 filesystem) on device 1:0. > Freeing unused kernel memory: 184k init > > > /proc/iomem > > 4ef600300-4ef600307 : serial > 4ef600400-4ef600407 : serial > d80000000-dffffffff : /plb/pci@c0ec00000 > e00000000-e7fffffff : /plb/pciex@d00000000 > e80000000-effffffff : /plb/pciex@d20000000 > e80000000-e800fffff : PCI Bus 0001:81 > e80000000-e80001fff : 0001:81:00.0 > e80000000-e80001fff : sata_sil24 > e80002000-e8000207f : 0001:81:00.0 > e80002000-e8000207f : sata_sil24 > > > /proc/ioports > > 00000000-0000ffff : /plb/pci@c0ec00000 > 00000000-00000fff : Legacy IO > fffc0000-fffcffff : /plb/pciex@d00000000 > fffc0000-fffc0fff : Legacy IO > fffe0000-fffeffff : /plb/pciex@d20000000 > fffe0000-fffe0fff : Legacy IO > fffe1000-fffe1fff : PCI Bus 0001:81 > fffe1000-fffe107f : 0001:81:00.0 > > > > ============== Failing ====================== > > > Using PowerPC 44x Platform machine description > Linux version 2.6.36-rc3-00186-g0e52247 (aymane@lablinux) (gcc version 4.2.2) > #19 Mon Jun 27 06:09:26 CDT 2011 > Found initrd at 0xdfa5c000:0xdfe4cbfa > Found legacy serial port 0 for /plb/opb/serial@ef600300 > mem=4ef600300, taddr=4ef600300, irq=0, clk=6451612, speed=0 > Found legacy serial port 1 for /plb/opb/serial@ef600400 > mem=4ef600400, taddr=4ef600400, irq=0, clk=6451612, speed=0 > Top of RAM: 0x20000000, Total RAM: 0x20000000 > Memory hole size: 0MB > Zone PFN ranges: > DMA 0x00000000 -> 0x00020000 > Normal empty > HighMem empty > Movable zone start PFN for each node > early_node_map[1] active PFN ranges > 0: 0x00000000 -> 0x00020000 > On node 0 totalpages: 131072 > free_area_init_node: node 0, pgdat c03b9f48, node_mem_map c03ed000 > DMA zone: 1024 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 130048 pages, LIFO batch:31 > MMU: Allocated 1088 bytes of context maps for 255 contexts > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 > Kernel command line: root=/dev/ram rw mem=512M > ip=169.254.0.180:169.254.0.100:169.254.0.100:255.255.255.0:tanosx:eth0:off > panic=1 console=ttyS0,57600 > PID hash table entries: 2048 (order: 1, 8192 bytes) > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > High memory: 0k > Memory: 511668k/524288k available (3692k kernel code, 12620k reserved, 176k > data, 141k bss, 184k init) > Kernel virtual memory layout: > * 0xfffcf000..0xfffff000 : fixmap > * 0xffc00000..0xffe00000 : highmem PTEs > * 0xffa00000..0xffc00000 : consistent mem > * 0xffa00000..0xffa00000 : early ioremap > * 0xe1000000..0xffa00000 : vmalloc & ioremap > SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > NR_IRQS:512 > UIC0 (32 IRQ sources) at DCR 0xc0 > UIC1 (32 IRQ sources) at DCR 0xd0 > irq: irq 30 on host /interrupt-controller0 mapped to virtual irq 30 > UIC2 (32 IRQ sources) at DCR 0xe0 > irq: irq 10 on host /interrupt-controller0 mapped to virtual irq 16 > UIC3 (32 IRQ sources) at DCR 0xf0 > irq: irq 16 on host /interrupt-controller0 mapped to virtual irq 17 > time_init: decrementer frequency = 800.000010 MHz > time_init: processor frequency = 800.000010 MHz > clocksource: timebase mult[500000] shift[22] registered > clockevent: decrementer mult[ccccccf7] shift[32] cpu[0] > pid_max: default: 32768 minimum: 301 > Mount-cache hash table entries: 512 > NET: Registered protocol family 16 > i2c-core: driver [dummy] registered > irq: irq 11 on host /interrupt-controller1 mapped to virtual irq 18 > 256k L2-cache enabled > PCIE0: Checking link... > PCIE0: No device detected. > PCI host bridge /plb/pciex@d00000000 (primary) ranges: > MEM 0x0000000e00000000..0x0000000e7fffffff -> 0x0000000080000000 > MEM 0x0000000f00000000..0x0000000f000fffff -> 0x0000000000000000 > IO 0x0000000f80000000..0x0000000f8000ffff -> 0x0000000000000000 > Removing ISA hole at 0x0000000f00000000 > 4xx PCI DMA offset set to 0x00000000 > /plb/pciex@d00000000: Legacy ISA memory support enabled > PCIE0: successfully set as root-complex > PCIE1: Checking link... > PCIE1: Device detected, waiting for link... > PCIE1: link is up ! > PCI host bridge /plb/pciex@d20000000 (primary) ranges: > MEM 0x0000000e80000000..0x0000000effffffff -> 0x0000000080000000 > MEM 0x0000000f00100000..0x0000000f001fffff -> 0x0000000000000000 > IO 0x0000000f80010000..0x0000000f8001ffff -> 0x0000000000000000 > Removing ISA hole at 0x0000000f00100000 > 4xx PCI DMA offset set to 0x00000000 > /plb/pciex@d20000000: Legacy ISA memory support enabled > PCIE1: successfully set as root-complex > PCI host bridge /plb/pci@c0ec00000 (primary) ranges: > MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000 > MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000 > IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000 > Removing ISA hole at 0x0000000c0ee00000 > 4xx PCI DMA offset set to 0x00000000 > /plb/pci@c0ec00000: Legacy ISA memory support enabled > PCI: Probing PCI hardware > pci_bus 0000:40: scanning bus > pci 0000:40:00.0: found [aaa0:bed0] class 000604 header type 01 > pci 0000:40:00.0: reg 10: [mem 0x00000000-0x7fffffff pref] > pci_bus 0000:40: fixups for bus > pci 0000:40:00.0: scanning [bus 41-7f] behind bridge, pass 0 > pci_bus 0000:41: scanning bus > pci_bus 0000:41: fixups for bus > pci 0000:40:00.0: PCI bridge to [bus 41-7f] > pci 0000:40:00.0: bridge window [io 0x0000-0x0000] (disabled) > pci 0000:40:00.0: bridge window [mem 0x00000000-0x000fffff] (disabled) > pci 0000:40:00.0: bridge window [mem 0x00000000-0x000fffff pref] (disabled) > pci_bus 0000:41: bus scan returning with max=41 > pci 0000:40:00.0: scanning [bus 41-7f] behind bridge, pass 1 > pci_bus 0000:40: bus scan returning with max=7f > pci_bus 0001:80: scanning bus > pci 0001:80:00.0: found [aaa1:bed1] class 000604 header type 01 > pci 0001:80:00.0: reg 10: [mem 0x00000000-0x7fffffff pref] > pci_bus 0001:80: fixups for bus > pci 0001:80:00.0: scanning [bus 81-bf] behind bridge, pass 0 > pci_bus 0001:81: scanning bus > pci 0001:81:00.0: found [1095:3531] class 000180 header type 00 > pci 0001:81:00.0: reg 10: [mem 0x00000000-0x0000007f 64bit] > pci 0001:81:00.0: reg 18: [mem 0x00000000-0x00001fff 64bit] > pci 0001:81:00.0: reg 20: [io 0x0000-0x007f] > pci 0001:81:00.0: supports D1 D2 > pci_bus 0001:81: fixups for bus > pci 0001:80:00.0: PCI bridge to [bus 81-bf] > pci 0001:80:00.0: bridge window [io 0x0000-0x0000] (disabled) > pci 0001:80:00.0: bridge window [mem 0x00000000-0x000fffff] (disabled) > pci 0001:80:00.0: bridge window [mem 0x00000000-0x000fffff pref] (disabled) > irq: irq 16 on host /interrupt-controller3 mapped to virtual irq 19 > pci_bus 0001:81: bus scan returning with max=81 > pci 0001:80:00.0: scanning [bus 81-bf] behind bridge, pass 1 > pci_bus 0001:80: bus scan returning with max=bf > pci_bus 0002:00: scanning bus > pci_bus 0002:00: fixups for bus > pci_bus 0002:00: bus scan returning with max=00 > pci 0000:40:00.0: BAR 0: assigned [mem 0xe00000000-0xe7fffffff pref] > pci 0000:40:00.0: BAR 0: set to [mem 0xe00000000-0xe7fffffff pref] (PCI > address [0x80000000-0xffffffff] > pci 0000:40:00.0: PCI bridge to [bus 41-7f] > pci 0000:40:00.0: bridge window [io disabled] > pci 0000:40:00.0: bridge window [mem disabled] > pci 0000:40:00.0: bridge window [mem pref disabled] > pci 0001:80:00.0: BAR 0: assigned [mem 0xe80000000-0xeffffffff pref] > pci 0001:80:00.0: BAR 0: set to [mem 0xe80000000-0xeffffffff pref] (PCI > address [0x80000000-0xffffffff] > pci 0001:80:00.0: BAR 8: can't assign mem (size 0x100000) > pci 0001:80:00.0: BAR 7: assigned [io 0xfffe1000-0xfffe1fff] > pci 0001:81:00.0: BAR 2: can't assign mem (size 0x2000) > pci 0001:81:00.0: BAR 0: can't assign mem (size 0x80) > pci 0001:81:00.0: BAR 4: assigned [io 0xfffe1000-0xfffe107f] > pci 0001:81:00.0: BAR 4: set to [io 0xfffe1000-0xfffe107f] (PCI address > [0x1000-0x107f] > pci 0001:80:00.0: PCI bridge to [bus 81-bf] > pci 0001:80:00.0: bridge window [io 0xfffe1000-0xfffe1fff] > pci 0001:80:00.0: bridge window [mem disabled] > pci 0001:80:00.0: bridge window [mem pref disabled] > pci_bus 0000:40: resource 0 [io 0xfffc0000-0xfffcffff] > pci_bus 0000:40: resource 1 [mem 0xe00000000-0xe7fffffff] > pci_bus 0001:80: resource 0 [io 0xfffe0000-0xfffeffff] > pci_bus 0001:80: resource 1 [mem 0xe80000000-0xeffffffff] > pci_bus 0001:81: resource 0 [io 0xfffe1000-0xfffe1fff] > pci_bus 0002:00: resource 0 [io 0x0000-0xffff] > pci_bus 0002:00: resource 1 [mem 0xd80000000-0xdffffffff] > bio: create slab <bio-0> at 0 > i2c-core: driver [pcf857x] registered > vgaarb: loaded > SCSI subsystem initialized > libata version 3.00 loaded. > Switching to clocksource timebase > NET: Registered protocol family 2 > IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > TCP established hash table entries: 16384 (order: 5, 131072 bytes) > TCP bind hash table entries: 16384 (order: 4, 65536 bytes) > TCP: Hash tables configured (established 16384 bind 16384) > TCP reno registered > UDP hash table entries: 256 (order: 0, 4096 bytes) > UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) > NET: Registered protocol family 1 > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > RPC: Registered tcp NFSv4.1 backchannel transport module. > Trying to unpack rootfs image as initramfs... > rootfs image is not initramfs (no cpio magic); looks like an initrd > Freeing initrd memory: 4034k freed > irq: irq 1 on host /interrupt-controller1 mapped to virtual irq 20 > irq: irq 1 on host /interrupt-controller0 mapped to virtual irq 21 > irq: irq 29 on host /interrupt-controller0 mapped to virtual irq 29 > irq: irq 6 on host /interrupt-controller2 mapped to virtual irq 22 > irq: irq 7 on host /interrupt-controller2 mapped to virtual irq 23 > irq: irq 3 on host /interrupt-controller2 mapped to virtual irq 24 > irq: irq 4 on host /interrupt-controller2 mapped to virtual irq 25 > irq: irq 5 on host /interrupt-controller2 mapped to virtual irq 26 > irq: irq 29 on host /interrupt-controller2 mapped to virtual irq 27 > irq: irq 30 on host /interrupt-controller2 mapped to virtual irq 28 > irq: irq 28 on host /interrupt-controller2 mapped to virtual irq 31 > irq: irq 26 on host /interrupt-controller1 mapped to virtual irq 32 > irq: irq 12 on host /interrupt-controller0 mapped to virtual irq 33 > irq: irq 0 on host /interrupt-controller3 mapped to virtual irq 34 > irq: irq 5 on host /interrupt-controller3 mapped to virtual irq 35 > irq: irq 6 on host /interrupt-controller1 mapped to virtual irq 36 > irq: irq 2 on host /interrupt-controller0 mapped to virtual irq 37 > irq: irq 3 on host /interrupt-controller0 mapped to virtual irq 38 > irq: irq 16 on host /interrupt-controller2 mapped to virtual irq 39 > irq: irq 20 on host /interrupt-controller2 mapped to virtual irq 40 > irq: irq 17 on host /interrupt-controller2 mapped to virtual irq 41 > irq: irq 21 on host /interrupt-controller2 mapped to virtual irq 42 > msgmni has been set to 1007 > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) > io scheduler noop registered > io scheduler deadline registered > io scheduler cfq registered (default) > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled > serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 20) is a U6_16550A > console [ttyS0] enabled > serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 21) is a U6_16550A > 4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 20) is a 16550 > 4ef600400.serial: ttyS1 at MMIO 0x4ef600400 (irq = 21) is a 16550 > brd: module loaded > i2c-core: driver [at24] registered > sata_sil24 0001:81:00.0: version 1.1 > sata_sil24 0001:81:00.0: enabling device (0000 -> 0001) > sata_sil24: probe of 0001:81:00.0 failed with error -22 > PPC 4xx OCP EMAC driver, version 3.54 > MAL v2 /plb/mcmal, 2 TX channels, 16 RX channels > ZMII /plb/opb/emac-zmii@ef600d00 initialized > RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support > TAH /plb/opb/emac-tah@ef601350 initialized > TAH /plb/opb/emac-tah@ef601450 initialized > /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode > eth0: EMAC-0 /plb/opb/ethernet@ef600e00, MAC 00:10:ec:01:02:b9 > eth0: found Generic MII PHY (0x00) > /plb/opb/emac-rgmii@ef601500: input 1 in RGMII mode > eth1: EMAC-1 /plb/opb/ethernet@ef600f00, MAC 00:10:ec:81:02:b9 > eth1: found Generic MII PHY (0x01) > i2c /dev entries driver > i2c-core: driver [dev_driver] registered > of:ibm-iic 4ef600700.i2c: clckdiv = 9 > i2c i2c-0: adapter [IBM IIC] registered > irq: irq 25 on host /interrupt-controller2 mapped to virtual irq 43 > i2c 0-0068: uevent > i2c i2c-0: client [m41t80] registered with bus id 0-0068 > irq: irq 20 on host /interrupt-controller1 mapped to virtual irq 44 > i2c 0-0048: uevent > i2c i2c-0: client [ad7414] registered with bus id 0-0048 > i2c-dev: adapter [IBM IIC] registered as minor 0 > of:ibm-iic 4ef600700.i2c: using standard (100 kHz) mode > of:ibm-iic 4ef600800.i2c: clckdiv = 9 > i2c i2c-1: adapter [IBM IIC] registered > i2c-dev: adapter [IBM IIC] registered as minor 1 > of:ibm-iic 4ef600800.i2c: using standard (100 kHz) mode > Netfilter messages via NETLINK v0.30. > nf_conntrack version 0.5.0 (8057 buckets, 32228 max) > ctnetlink v0.93: registering with nfnetlink. > xt_time: kernel timezone is -0000 > IPVS: Registered protocols () > IPVS: Connection hash table configured (size=4096, memory=32Kbytes) > IPVS: ipvs loaded. > ip_tables: (C) 2000-2006 Netfilter Core Team > ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully > arp_tables: (C) 2002 David S. Miller > TCP cubic registered > NET: Registered protocol family 17 > Bridge firewalling registered > Ebtables v2.0 registered > eth0: link is down > IP-Config: Complete: > device=eth0, addr=169.254.0.180, mask=255.255.255.0, gw=169.254.0.100, > host=tanosx, domain=, nis-domain=(none), > bootserver=169.254.0.100, rootserver=169.254.0.100, rootpath= > RAMDISK: gzip image found at block 0 > eth0: link is up, 100 FDX, pause enabled > VFS: Mounted root (ext2 filesystem) on device 1:0. > Freeing unused kernel memory: 184k init > > /proc/iomem > > 4ef600300-4ef600307 : serial > 4ef600400-4ef600407 : serial > d80000000-dffffffff : /plb/pci@c0ec00000 > e00000000-e7fffffff : /plb/pciex@d00000000 > e00000000-e7fffffff : 0000:40:00.0 > e80000000-effffffff : /plb/pciex@d20000000 > e80000000-effffffff : 0001:80:00.0 > > /proc/ioports > > 00000000-0000ffff : /plb/pci@c0ec00000 > 00000000-00000fff : Legacy IO > fffc0000-fffcffff : /plb/pciex@d00000000 > fffc0000-fffc0fff : Legacy IO > fffe0000-fffeffff : /plb/pciex@d20000000 > fffe0000-fffe0fff : Legacy IO > fffe1000-fffe1fff : PCI Bus 0001:81 > fffe1000-fffe107f : 0001:81:00.0 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
