On Mon, Jun 27, 2011 at 08:19:56PM +1000, Benjamin Herrenschmidt wrote:
> On Sat, 2011-06-25 at 18:52 -0500, Ayman El-Khashab wrote:
> > I noticed during a recent development with the 460SX that a
> > simple device that once worked stopped. I did a bisect to
> > find the offending commit and it turns out to be this one:
> >
> > 0e52247a2ed1f211f0c4f682dc999610a368903f is the first bad
> > commit
> > commit 0e52247a2ed1f211f0c4f682dc999610a368903f
> > Author: Cam Macdonell <c...@cs.ualberta.ca>
> > Date: Tue Sep 7 17:25:20 2010 -0700
> >
> > PCI: fix pci_resource_alignment prototype
> >
<snip>
> >
> > The device driver fails with "error -22" on a 460SX (which
> > has the 36 bit pci space).
> >
> > sil24 /drivers/ata/sata_sil24.c
>
> Can you send a dmesg & output of /proc/iomem & ioport with and without
> the patch (same kernel otherwise) ?
>
> Also can you try to figure out (printk's) where in the driver does it
> fail ? (Which function fails)
Yes, here is the output from a canyonlands (460ex) that exhibits
the same problem and in the same place. Of the two devices
I have that fail (sil24 and one other), both fail in exactly
the same place in lib/devres.c within the function
pcim_iomap_regions. In that function, there is the
following call -- it fails b/c len returns 0 and tha failure
bubbles up to "error -22".
len = pci_resource_len(pdev, i);
> It's possible that this changes something in the core resource
> assignment code causing something else to fail elsewhere or exposing
> another bug elsewhere with the consequence of leaving the SiL with badly
> assigned resources.
That was my initial thought as well, but I wasn't versed
enough in the pci magic in order to completely figure it
out.
Here is the output, it is dmesg, iomem, then ioports for the
passing and then the failing cases.
thanks
ayman
============== Passing ======================
Using PowerPC 44x Platform machine description
Linux version 2.6.36-rc3-00186-g0e52247-dirty (aymane@lablinux) (gcc version
4.2.2) #18 Sat Jun 25 13:51:44 CDT 2011
Found initrd at 0xdfa5c000:0xdfe4cbfa
Found legacy serial port 0 for /plb/opb/serial@ef600300
mem=4ef600300, taddr=4ef600300, irq=0, clk=6451612, speed=0
Found legacy serial port 1 for /plb/opb/serial@ef600400
mem=4ef600400, taddr=4ef600400, irq=0, clk=6451612, speed=0
Top of RAM: 0x20000000, Total RAM: 0x20000000
Memory hole size: 0MB
Zone PFN ranges:
DMA 0x00000000 -> 0x00020000
Normal empty
HighMem empty
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00020000
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat c03b9f48, node_mem_map c03ed000
DMA zone: 1024 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 130048 pages, LIFO batch:31
MMU: Allocated 1088 bytes of context maps for 255 contexts
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: root=/dev/ram rw mem=512M
ip=169.254.0.180:169.254.0.100:169.254.0.100:255.255.255.0:tanosx:eth0:off
panic=1 console=ttyS0,57600
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
High memory: 0k
Memory: 511668k/524288k available (3692k kernel code, 12620k reserved, 176k
data, 141k bss, 184k init)
Kernel virtual memory layout:
* 0xfffcf000..0xfffff000 : fixmap
* 0xffc00000..0xffe00000 : highmem PTEs
* 0xffa00000..0xffc00000 : consistent mem
* 0xffa00000..0xffa00000 : early ioremap
* 0xe1000000..0xffa00000 : vmalloc & ioremap
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:512
UIC0 (32 IRQ sources) at DCR 0xc0
UIC1 (32 IRQ sources) at DCR 0xd0
irq: irq 30 on host /interrupt-controller0 mapped to virtual irq 30
UIC2 (32 IRQ sources) at DCR 0xe0
irq: irq 10 on host /interrupt-controller0 mapped to virtual irq 16
UIC3 (32 IRQ sources) at DCR 0xf0
irq: irq 16 on host /interrupt-controller0 mapped to virtual irq 17
time_init: decrementer frequency = 800.000010 MHz
time_init: processor frequency = 800.000010 MHz
clocksource: timebase mult[500000] shift[22] registered
clockevent: decrementer mult[ccccccf7] shift[32] cpu[0]
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
i2c-core: driver [dummy] registered
irq: irq 11 on host /interrupt-controller1 mapped to virtual irq 18
256k L2-cache enabled
PCIE0: Checking link...
PCIE0: No device detected.
PCI host bridge /plb/pciex@d00000000 (primary) ranges:
MEM 0x0000000e00000000..0x0000000e7fffffff -> 0x0000000080000000
MEM 0x0000000f00000000..0x0000000f000fffff -> 0x0000000000000000
IO 0x0000000f80000000..0x0000000f8000ffff -> 0x0000000000000000
Removing ISA hole at 0x0000000f00000000
4xx PCI DMA offset set to 0x00000000
/plb/pciex@d00000000: Legacy ISA memory support enabled
PCIE0: successfully set as root-complex
PCIE1: Checking link...
PCIE1: Device detected, waiting for link...
PCIE1: link is up !
PCI host bridge /plb/pciex@d20000000 (primary) ranges:
MEM 0x0000000e80000000..0x0000000effffffff -> 0x0000000080000000
MEM 0x0000000f00100000..0x0000000f001fffff -> 0x0000000000000000
IO 0x0000000f80010000..0x0000000f8001ffff -> 0x0000000000000000
Removing ISA hole at 0x0000000f00100000
4xx PCI DMA offset set to 0x00000000
/plb/pciex@d20000000: Legacy ISA memory support enabled
PCIE1: successfully set as root-complex
PCI host bridge /plb/pci@c0ec00000 (primary) ranges:
MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000
MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000
IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000
Removing ISA hole at 0x0000000c0ee00000
4xx PCI DMA offset set to 0x00000000
/plb/pci@c0ec00000: Legacy ISA memory support enabled
PCI: Probing PCI hardware
pci_bus 0000:40: scanning bus
pci 0000:40:00.0: found [aaa0:bed0] class 000604 header type 01
pci 0000:40:00.0: reg 10: [mem 0x00000000-0x7fffffff pref]
pci_bus 0000:40: fixups for bus
pci 0000:40:00.0: scanning [bus 41-7f] behind bridge, pass 0
pci_bus 0000:41: scanning bus
pci_bus 0000:41: fixups for bus
pci 0000:40:00.0: PCI bridge to [bus 41-7f]
pci 0000:40:00.0: bridge window [io 0x0000-0x0000] (disabled)
pci 0000:40:00.0: bridge window [mem 0x00000000-0x000fffff] (disabled)
pci 0000:40:00.0: bridge window [mem 0x00000000-0x000fffff pref] (disabled)
pci_bus 0000:41: bus scan returning with max=41
pci 0000:40:00.0: scanning [bus 41-7f] behind bridge, pass 1
pci_bus 0000:40: bus scan returning with max=7f
pci_bus 0001:80: scanning bus
pci 0001:80:00.0: found [aaa1:bed1] class 000604 header type 01
pci 0001:80:00.0: reg 10: [mem 0x00000000-0x7fffffff pref]
pci_bus 0001:80: fixups for bus
pci 0001:80:00.0: scanning [bus 81-bf] behind bridge, pass 0
pci_bus 0001:81: scanning bus
pci 0001:81:00.0: found [1095:3531] class 000180 header type 00
pci 0001:81:00.0: reg 10: [mem 0x00000000-0x0000007f 64bit]
pci 0001:81:00.0: reg 18: [mem 0x00000000-0x00001fff 64bit]
pci 0001:81:00.0: reg 20: [io 0x0000-0x007f]
pci 0001:81:00.0: supports D1 D2
pci_bus 0001:81: fixups for bus
pci 0001:80:00.0: PCI bridge to [bus 81-bf]
pci 0001:80:00.0: bridge window [io 0x0000-0x0000] (disabled)
pci 0001:80:00.0: bridge window [mem 0x00000000-0x000fffff] (disabled)
pci 0001:80:00.0: bridge window [mem 0x00000000-0x000fffff pref] (disabled)
irq: irq 16 on host /interrupt-controller3 mapped to virtual irq 19
pci_bus 0001:81: bus scan returning with max=81
pci 0001:80:00.0: scanning [bus 81-bf] behind bridge, pass 1
pci_bus 0001:80: bus scan returning with max=bf
pci_bus 0002:00: scanning bus
pci_bus 0002:00: fixups for bus
pci_bus 0002:00: bus scan returning with max=00
pci 0000:40:00.0: BAR 0: can't assign mem pref (size 0x80000000)
pci 0000:40:00.0: PCI bridge to [bus 41-7f]
pci 0000:40:00.0: bridge window [io disabled]
pci 0000:40:00.0: bridge window [mem disabled]
pci 0000:40:00.0: bridge window [mem pref disabled]
pci 0001:80:00.0: BAR 0: can't assign mem pref (size 0x80000000)
pci 0001:80:00.0: BAR 8: assigned [mem 0xe80000000-0xe800fffff]
pci 0001:80:00.0: BAR 7: assigned [io 0xfffe1000-0xfffe1fff]
pci 0001:81:00.0: BAR 2: assigned [mem 0xe80000000-0xe80001fff 64bit]
pci 0001:81:00.0: BAR 2: set to [mem 0xe80000000-0xe80001fff 64bit] (PCI
address [0x80000000-0x80001fff]
pci 0001:81:00.0: BAR 0: assigned [mem 0xe80002000-0xe8000207f 64bit]
pci 0001:81:00.0: BAR 0: set to [mem 0xe80002000-0xe8000207f 64bit] (PCI
address [0x80002000-0x8000207f]
pci 0001:81:00.0: BAR 4: assigned [io 0xfffe1000-0xfffe107f]
pci 0001:81:00.0: BAR 4: set to [io 0xfffe1000-0xfffe107f] (PCI address
[0x1000-0x107f]
pci 0001:80:00.0: PCI bridge to [bus 81-bf]
pci 0001:80:00.0: bridge window [io 0xfffe1000-0xfffe1fff]
pci 0001:80:00.0: bridge window [mem 0xe80000000-0xe800fffff]
pci 0001:80:00.0: bridge window [mem pref disabled]
pci_bus 0000:40: resource 0 [io 0xfffc0000-0xfffcffff]
pci_bus 0000:40: resource 1 [mem 0xe00000000-0xe7fffffff]
pci_bus 0001:80: resource 0 [io 0xfffe0000-0xfffeffff]
pci_bus 0001:80: resource 1 [mem 0xe80000000-0xeffffffff]
pci_bus 0001:81: resource 0 [io 0xfffe1000-0xfffe1fff]
pci_bus 0001:81: resource 1 [mem 0xe80000000-0xe800fffff]
pci_bus 0002:00: resource 0 [io 0x0000-0xffff]
pci_bus 0002:00: resource 1 [mem 0xd80000000-0xdffffffff]
bio: create slab <bio-0> at 0
i2c-core: driver [pcf857x] registered
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
Switching to clocksource timebase
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 4034k freed
irq: irq 1 on host /interrupt-controller1 mapped to virtual irq 20
irq: irq 1 on host /interrupt-controller0 mapped to virtual irq 21
irq: irq 29 on host /interrupt-controller0 mapped to virtual irq 29
irq: irq 6 on host /interrupt-controller2 mapped to virtual irq 22
irq: irq 7 on host /interrupt-controller2 mapped to virtual irq 23
irq: irq 3 on host /interrupt-controller2 mapped to virtual irq 24
irq: irq 4 on host /interrupt-controller2 mapped to virtual irq 25
irq: irq 5 on host /interrupt-controller2 mapped to virtual irq 26
irq: irq 29 on host /interrupt-controller2 mapped to virtual irq 27
irq: irq 30 on host /interrupt-controller2 mapped to virtual irq 28
irq: irq 28 on host /interrupt-controller2 mapped to virtual irq 31
irq: irq 26 on host /interrupt-controller1 mapped to virtual irq 32
irq: irq 12 on host /interrupt-controller0 mapped to virtual irq 33
irq: irq 0 on host /interrupt-controller3 mapped to virtual irq 34
irq: irq 5 on host /interrupt-controller3 mapped to virtual irq 35
irq: irq 6 on host /interrupt-controller1 mapped to virtual irq 36
irq: irq 2 on host /interrupt-controller0 mapped to virtual irq 37
irq: irq 3 on host /interrupt-controller0 mapped to virtual irq 38
irq: irq 16 on host /interrupt-controller2 mapped to virtual irq 39
irq: irq 20 on host /interrupt-controller2 mapped to virtual irq 40
irq: irq 17 on host /interrupt-controller2 mapped to virtual irq 41
irq: irq 21 on host /interrupt-controller2 mapped to virtual irq 42
msgmni has been set to 1007
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 20) is a U6_16550A
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 21) is a U6_16550A
4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 20) is a 16550
4ef600400.serial: ttyS1 at MMIO 0x4ef600400 (irq = 21) is a 16550
brd: module loaded
i2c-core: driver [at24] registered
sata_sil24 0001:81:00.0: version 1.1
sata_sil24 0001:81:00.0: enabling device (0000 -> 0003)
sata_sil24 0001:81:00.0: enabling bus mastering
scsi0 : sata_sil24
ata1: SATA max UDMA/100 host m128@0xe80002000 port 0xe80000000 irq 19
PPC 4xx OCP EMAC driver, version 3.54
MAL v2 /plb/mcmal, 2 TX channels, 16 RX channels
ZMII /plb/opb/emac-zmii@ef600d00 initialized
RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support
TAH /plb/opb/emac-tah@ef601350 initialized
TAH /plb/opb/emac-tah@ef601450 initialized
/plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
eth0: EMAC-0 /plb/opb/ethernet@ef600e00, MAC 00:10:ec:01:02:b9
eth0: found Generic MII PHY (0x00)
/plb/opb/emac-rgmii@ef601500: input 1 in RGMII mode
eth1: EMAC-1 /plb/opb/ethernet@ef600f00, MAC 00:10:ec:81:02:b9
eth1: found Generic MII PHY (0x01)
i2c /dev entries driver
i2c-core: driver [dev_driver] registered
of:ibm-iic 4ef600700.i2c: clckdiv = 9
i2c i2c-0: adapter [IBM IIC] registered
irq: irq 25 on host /interrupt-controller2 mapped to virtual irq 43
i2c 0-0068: uevent
i2c i2c-0: client [m41t80] registered with bus id 0-0068
irq: irq 20 on host /interrupt-controller1 mapped to virtual irq 44
i2c 0-0048: uevent
i2c i2c-0: client [ad7414] registered with bus id 0-0048
i2c-dev: adapter [IBM IIC] registered as minor 0
of:ibm-iic 4ef600700.i2c: using standard (100 kHz) mode
of:ibm-iic 4ef600800.i2c: clckdiv = 9
i2c i2c-1: adapter [IBM IIC] registered
i2c-dev: adapter [IBM IIC] registered as minor 1
of:ibm-iic 4ef600800.i2c: using standard (100 kHz) mode
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8057 buckets, 32228 max)
ctnetlink v0.93: registering with nfnetlink.
xt_time: kernel timezone is -0000
IPVS: Registered protocols ()
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
IPVS: ipvs loaded.
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 17
Bridge firewalling registered
Ebtables v2.0 registered
eth0: link is down
IP-Config: Complete:
device=eth0, addr=169.254.0.180, mask=255.255.255.0, gw=169.254.0.100,
host=tanosx, domain=, nis-domain=(none),
bootserver=169.254.0.100, rootserver=169.254.0.100, rootpath=
ata1: SATA link down (SStatus 0 SControl 0)
RAMDISK: gzip image found at block 0
eth0: link is up, 100 FDX, pause enabled
VFS: Mounted root (ext2 filesystem) on device 1:0.
Freeing unused kernel memory: 184k init
/proc/iomem
4ef600300-4ef600307 : serial
4ef600400-4ef600407 : serial
d80000000-dffffffff : /plb/pci@c0ec00000
e00000000-e7fffffff : /plb/pciex@d00000000
e80000000-effffffff : /plb/pciex@d20000000
e80000000-e800fffff : PCI Bus 0001:81
e80000000-e80001fff : 0001:81:00.0
e80000000-e80001fff : sata_sil24
e80002000-e8000207f : 0001:81:00.0
e80002000-e8000207f : sata_sil24
/proc/ioports
00000000-0000ffff : /plb/pci@c0ec00000
00000000-00000fff : Legacy IO
fffc0000-fffcffff : /plb/pciex@d00000000
fffc0000-fffc0fff : Legacy IO
fffe0000-fffeffff : /plb/pciex@d20000000
fffe0000-fffe0fff : Legacy IO
fffe1000-fffe1fff : PCI Bus 0001:81
fffe1000-fffe107f : 0001:81:00.0
============== Failing ======================
Using PowerPC 44x Platform machine description
Linux version 2.6.36-rc3-00186-g0e52247 (aymane@lablinux) (gcc version 4.2.2)
#19 Mon Jun 27 06:09:26 CDT 2011
Found initrd at 0xdfa5c000:0xdfe4cbfa
Found legacy serial port 0 for /plb/opb/serial@ef600300
mem=4ef600300, taddr=4ef600300, irq=0, clk=6451612, speed=0
Found legacy serial port 1 for /plb/opb/serial@ef600400
mem=4ef600400, taddr=4ef600400, irq=0, clk=6451612, speed=0
Top of RAM: 0x20000000, Total RAM: 0x20000000
Memory hole size: 0MB
Zone PFN ranges:
DMA 0x00000000 -> 0x00020000
Normal empty
HighMem empty
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00020000
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat c03b9f48, node_mem_map c03ed000
DMA zone: 1024 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 130048 pages, LIFO batch:31
MMU: Allocated 1088 bytes of context maps for 255 contexts
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: root=/dev/ram rw mem=512M
ip=169.254.0.180:169.254.0.100:169.254.0.100:255.255.255.0:tanosx:eth0:off
panic=1 console=ttyS0,57600
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
High memory: 0k
Memory: 511668k/524288k available (3692k kernel code, 12620k reserved, 176k
data, 141k bss, 184k init)
Kernel virtual memory layout:
* 0xfffcf000..0xfffff000 : fixmap
* 0xffc00000..0xffe00000 : highmem PTEs
* 0xffa00000..0xffc00000 : consistent mem
* 0xffa00000..0xffa00000 : early ioremap
* 0xe1000000..0xffa00000 : vmalloc & ioremap
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:512
UIC0 (32 IRQ sources) at DCR 0xc0
UIC1 (32 IRQ sources) at DCR 0xd0
irq: irq 30 on host /interrupt-controller0 mapped to virtual irq 30
UIC2 (32 IRQ sources) at DCR 0xe0
irq: irq 10 on host /interrupt-controller0 mapped to virtual irq 16
UIC3 (32 IRQ sources) at DCR 0xf0
irq: irq 16 on host /interrupt-controller0 mapped to virtual irq 17
time_init: decrementer frequency = 800.000010 MHz
time_init: processor frequency = 800.000010 MHz
clocksource: timebase mult[500000] shift[22] registered
clockevent: decrementer mult[ccccccf7] shift[32] cpu[0]
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
i2c-core: driver [dummy] registered
irq: irq 11 on host /interrupt-controller1 mapped to virtual irq 18
256k L2-cache enabled
PCIE0: Checking link...
PCIE0: No device detected.
PCI host bridge /plb/pciex@d00000000 (primary) ranges:
MEM 0x0000000e00000000..0x0000000e7fffffff -> 0x0000000080000000
MEM 0x0000000f00000000..0x0000000f000fffff -> 0x0000000000000000
IO 0x0000000f80000000..0x0000000f8000ffff -> 0x0000000000000000
Removing ISA hole at 0x0000000f00000000
4xx PCI DMA offset set to 0x00000000
/plb/pciex@d00000000: Legacy ISA memory support enabled
PCIE0: successfully set as root-complex
PCIE1: Checking link...
PCIE1: Device detected, waiting for link...
PCIE1: link is up !
PCI host bridge /plb/pciex@d20000000 (primary) ranges:
MEM 0x0000000e80000000..0x0000000effffffff -> 0x0000000080000000
MEM 0x0000000f00100000..0x0000000f001fffff -> 0x0000000000000000
IO 0x0000000f80010000..0x0000000f8001ffff -> 0x0000000000000000
Removing ISA hole at 0x0000000f00100000
4xx PCI DMA offset set to 0x00000000
/plb/pciex@d20000000: Legacy ISA memory support enabled
PCIE1: successfully set as root-complex
PCI host bridge /plb/pci@c0ec00000 (primary) ranges:
MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000
MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000
IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000
Removing ISA hole at 0x0000000c0ee00000
4xx PCI DMA offset set to 0x00000000
/plb/pci@c0ec00000: Legacy ISA memory support enabled
PCI: Probing PCI hardware
pci_bus 0000:40: scanning bus
pci 0000:40:00.0: found [aaa0:bed0] class 000604 header type 01
pci 0000:40:00.0: reg 10: [mem 0x00000000-0x7fffffff pref]
pci_bus 0000:40: fixups for bus
pci 0000:40:00.0: scanning [bus 41-7f] behind bridge, pass 0
pci_bus 0000:41: scanning bus
pci_bus 0000:41: fixups for bus
pci 0000:40:00.0: PCI bridge to [bus 41-7f]
pci 0000:40:00.0: bridge window [io 0x0000-0x0000] (disabled)
pci 0000:40:00.0: bridge window [mem 0x00000000-0x000fffff] (disabled)
pci 0000:40:00.0: bridge window [mem 0x00000000-0x000fffff pref] (disabled)
pci_bus 0000:41: bus scan returning with max=41
pci 0000:40:00.0: scanning [bus 41-7f] behind bridge, pass 1
pci_bus 0000:40: bus scan returning with max=7f
pci_bus 0001:80: scanning bus
pci 0001:80:00.0: found [aaa1:bed1] class 000604 header type 01
pci 0001:80:00.0: reg 10: [mem 0x00000000-0x7fffffff pref]
pci_bus 0001:80: fixups for bus
pci 0001:80:00.0: scanning [bus 81-bf] behind bridge, pass 0
pci_bus 0001:81: scanning bus
pci 0001:81:00.0: found [1095:3531] class 000180 header type 00
pci 0001:81:00.0: reg 10: [mem 0x00000000-0x0000007f 64bit]
pci 0001:81:00.0: reg 18: [mem 0x00000000-0x00001fff 64bit]
pci 0001:81:00.0: reg 20: [io 0x0000-0x007f]
pci 0001:81:00.0: supports D1 D2
pci_bus 0001:81: fixups for bus
pci 0001:80:00.0: PCI bridge to [bus 81-bf]
pci 0001:80:00.0: bridge window [io 0x0000-0x0000] (disabled)
pci 0001:80:00.0: bridge window [mem 0x00000000-0x000fffff] (disabled)
pci 0001:80:00.0: bridge window [mem 0x00000000-0x000fffff pref] (disabled)
irq: irq 16 on host /interrupt-controller3 mapped to virtual irq 19
pci_bus 0001:81: bus scan returning with max=81
pci 0001:80:00.0: scanning [bus 81-bf] behind bridge, pass 1
pci_bus 0001:80: bus scan returning with max=bf
pci_bus 0002:00: scanning bus
pci_bus 0002:00: fixups for bus
pci_bus 0002:00: bus scan returning with max=00
pci 0000:40:00.0: BAR 0: assigned [mem 0xe00000000-0xe7fffffff pref]
pci 0000:40:00.0: BAR 0: set to [mem 0xe00000000-0xe7fffffff pref] (PCI address
[0x80000000-0xffffffff]
pci 0000:40:00.0: PCI bridge to [bus 41-7f]
pci 0000:40:00.0: bridge window [io disabled]
pci 0000:40:00.0: bridge window [mem disabled]
pci 0000:40:00.0: bridge window [mem pref disabled]
pci 0001:80:00.0: BAR 0: assigned [mem 0xe80000000-0xeffffffff pref]
pci 0001:80:00.0: BAR 0: set to [mem 0xe80000000-0xeffffffff pref] (PCI address
[0x80000000-0xffffffff]
pci 0001:80:00.0: BAR 8: can't assign mem (size 0x100000)
pci 0001:80:00.0: BAR 7: assigned [io 0xfffe1000-0xfffe1fff]
pci 0001:81:00.0: BAR 2: can't assign mem (size 0x2000)
pci 0001:81:00.0: BAR 0: can't assign mem (size 0x80)
pci 0001:81:00.0: BAR 4: assigned [io 0xfffe1000-0xfffe107f]
pci 0001:81:00.0: BAR 4: set to [io 0xfffe1000-0xfffe107f] (PCI address
[0x1000-0x107f]
pci 0001:80:00.0: PCI bridge to [bus 81-bf]
pci 0001:80:00.0: bridge window [io 0xfffe1000-0xfffe1fff]
pci 0001:80:00.0: bridge window [mem disabled]
pci 0001:80:00.0: bridge window [mem pref disabled]
pci_bus 0000:40: resource 0 [io 0xfffc0000-0xfffcffff]
pci_bus 0000:40: resource 1 [mem 0xe00000000-0xe7fffffff]
pci_bus 0001:80: resource 0 [io 0xfffe0000-0xfffeffff]
pci_bus 0001:80: resource 1 [mem 0xe80000000-0xeffffffff]
pci_bus 0001:81: resource 0 [io 0xfffe1000-0xfffe1fff]
pci_bus 0002:00: resource 0 [io 0x0000-0xffff]
pci_bus 0002:00: resource 1 [mem 0xd80000000-0xdffffffff]
bio: create slab <bio-0> at 0
i2c-core: driver [pcf857x] registered
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
Switching to clocksource timebase
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 4034k freed
irq: irq 1 on host /interrupt-controller1 mapped to virtual irq 20
irq: irq 1 on host /interrupt-controller0 mapped to virtual irq 21
irq: irq 29 on host /interrupt-controller0 mapped to virtual irq 29
irq: irq 6 on host /interrupt-controller2 mapped to virtual irq 22
irq: irq 7 on host /interrupt-controller2 mapped to virtual irq 23
irq: irq 3 on host /interrupt-controller2 mapped to virtual irq 24
irq: irq 4 on host /interrupt-controller2 mapped to virtual irq 25
irq: irq 5 on host /interrupt-controller2 mapped to virtual irq 26
irq: irq 29 on host /interrupt-controller2 mapped to virtual irq 27
irq: irq 30 on host /interrupt-controller2 mapped to virtual irq 28
irq: irq 28 on host /interrupt-controller2 mapped to virtual irq 31
irq: irq 26 on host /interrupt-controller1 mapped to virtual irq 32
irq: irq 12 on host /interrupt-controller0 mapped to virtual irq 33
irq: irq 0 on host /interrupt-controller3 mapped to virtual irq 34
irq: irq 5 on host /interrupt-controller3 mapped to virtual irq 35
irq: irq 6 on host /interrupt-controller1 mapped to virtual irq 36
irq: irq 2 on host /interrupt-controller0 mapped to virtual irq 37
irq: irq 3 on host /interrupt-controller0 mapped to virtual irq 38
irq: irq 16 on host /interrupt-controller2 mapped to virtual irq 39
irq: irq 20 on host /interrupt-controller2 mapped to virtual irq 40
irq: irq 17 on host /interrupt-controller2 mapped to virtual irq 41
irq: irq 21 on host /interrupt-controller2 mapped to virtual irq 42
msgmni has been set to 1007
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 20) is a U6_16550A
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 21) is a U6_16550A
4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 20) is a 16550
4ef600400.serial: ttyS1 at MMIO 0x4ef600400 (irq = 21) is a 16550
brd: module loaded
i2c-core: driver [at24] registered
sata_sil24 0001:81:00.0: version 1.1
sata_sil24 0001:81:00.0: enabling device (0000 -> 0001)
sata_sil24: probe of 0001:81:00.0 failed with error -22
PPC 4xx OCP EMAC driver, version 3.54
MAL v2 /plb/mcmal, 2 TX channels, 16 RX channels
ZMII /plb/opb/emac-zmii@ef600d00 initialized
RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support
TAH /plb/opb/emac-tah@ef601350 initialized
TAH /plb/opb/emac-tah@ef601450 initialized
/plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
eth0: EMAC-0 /plb/opb/ethernet@ef600e00, MAC 00:10:ec:01:02:b9
eth0: found Generic MII PHY (0x00)
/plb/opb/emac-rgmii@ef601500: input 1 in RGMII mode
eth1: EMAC-1 /plb/opb/ethernet@ef600f00, MAC 00:10:ec:81:02:b9
eth1: found Generic MII PHY (0x01)
i2c /dev entries driver
i2c-core: driver [dev_driver] registered
of:ibm-iic 4ef600700.i2c: clckdiv = 9
i2c i2c-0: adapter [IBM IIC] registered
irq: irq 25 on host /interrupt-controller2 mapped to virtual irq 43
i2c 0-0068: uevent
i2c i2c-0: client [m41t80] registered with bus id 0-0068
irq: irq 20 on host /interrupt-controller1 mapped to virtual irq 44
i2c 0-0048: uevent
i2c i2c-0: client [ad7414] registered with bus id 0-0048
i2c-dev: adapter [IBM IIC] registered as minor 0
of:ibm-iic 4ef600700.i2c: using standard (100 kHz) mode
of:ibm-iic 4ef600800.i2c: clckdiv = 9
i2c i2c-1: adapter [IBM IIC] registered
i2c-dev: adapter [IBM IIC] registered as minor 1
of:ibm-iic 4ef600800.i2c: using standard (100 kHz) mode
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8057 buckets, 32228 max)
ctnetlink v0.93: registering with nfnetlink.
xt_time: kernel timezone is -0000
IPVS: Registered protocols ()
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
IPVS: ipvs loaded.
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 17
Bridge firewalling registered
Ebtables v2.0 registered
eth0: link is down
IP-Config: Complete:
device=eth0, addr=169.254.0.180, mask=255.255.255.0, gw=169.254.0.100,
host=tanosx, domain=, nis-domain=(none),
bootserver=169.254.0.100, rootserver=169.254.0.100, rootpath=
RAMDISK: gzip image found at block 0
eth0: link is up, 100 FDX, pause enabled
VFS: Mounted root (ext2 filesystem) on device 1:0.
Freeing unused kernel memory: 184k init
/proc/iomem
4ef600300-4ef600307 : serial
4ef600400-4ef600407 : serial
d80000000-dffffffff : /plb/pci@c0ec00000
e00000000-e7fffffff : /plb/pciex@d00000000
e00000000-e7fffffff : 0000:40:00.0
e80000000-effffffff : /plb/pciex@d20000000
e80000000-effffffff : 0001:80:00.0
/proc/ioports
00000000-0000ffff : /plb/pci@c0ec00000
00000000-00000fff : Legacy IO
fffc0000-fffcffff : /plb/pciex@d00000000
fffc0000-fffc0fff : Legacy IO
fffe0000-fffeffff : /plb/pciex@d20000000
fffe0000-fffe0fff : Legacy IO
fffe1000-fffe1fff : PCI Bus 0001:81
fffe1000-fffe107f : 0001:81:00.0
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
