Hi Alex, Just for your information as you mentioned about it. The dual port support is being worked on, but not likely to be ready in this merge window.
- Leo ________________________________________ 发件人: Bounine, Alexandre [alexandre.boun...@idt.com] 发送时间: 2011年5月20日 21:18 到: Kumar Gala Cc: Li Yang-R58472; Xie Shaohui-B21989; Zang Roy-R61911; a...@linux-foundation.org; linuxppc-dev@lists.ozlabs.org; Gala Kumar-B11780 主题: RE: [PATCH 2/2][v3] rapidio,powerpc/85xx: Error interrupt handler for sRIO. Not at all. I tested it earlier and it works for me on 8548 platform. > -----Original Message----- > From: Kumar Gala [mailto:ga...@kernel.crashing.org] > Sent: Friday, May 20, 2011 8:42 AM > To: Bounine, Alexandre > Cc: Li Yang-R58472; Xie Shaohui-B21989; Zang Roy-R61911; akpm@linux- > foundation.org; linuxppc-dev@lists.ozlabs.org; Gala Kumar-B11780 > Subject: Re: [PATCH 2/2][v3] rapidio,powerpc/85xx: Error interrupt > handler for sRIO. > > Any reason for me not to apply this and send it upstream for now? > > - k > > On May 20, 2011, at 7:14 AM, Bounine, Alexandre wrote: > > > Kumar, > > > > Are you planning to release support for dual-port SRIO controller? > > If yes, it may be just merged into it (unless dual-port > implementation > > already has it). > > > > Alex. > > > >> -----Original Message----- > >> From: linuxppc-dev- > bounces+alexandre.bounine=idt....@lists.ozlabs.org > >> [mailto:linuxppc-dev- > >> bounces+alexandre.bounine=idt....@lists.ozlabs.org] On Behalf Of > Kumar > >> Gala > >> Sent: Friday, May 20, 2011 12:29 AM > >> To: Bounine, Alexandre > >> Cc: Li Yang-R58472; Xie Shaohui-B21989; Zang Roy-R61911; akpm@linux- > >> foundation.org; linuxppc-dev@lists.ozlabs.org; Gala Kumar-B11780 > >> Subject: Re: [PATCH 2/2][v3] rapidio,powerpc/85xx: Error interrupt > >> handler for sRIO. > >> > >> Alex, > >> > >> What are we doing with this patch? > >> > >> - k > >> > >> On Dec 3, 2010, at 12:04 PM, Bounine, Alexandre wrote: > >> > >>> I think they should follow the previous two that are in Kumar's > > tree. > >>> Probably Kumar may give you a better timeline estimate for this. > >>> > >>> Alex. > >>> > >>> From: > > linuxppc-dev-bounces+alexandre.bounine=idt....@lists.ozlabs.org > >> [mailto:linuxppc-dev- > >> bounces+alexandre.bounine=idt....@lists.ozlabs.org] On Behalf Of Xie > >> Shaohui-B21989 > >>> Sent: Thursday, December 02, 2010 10:29 PM > >>> To: Bounine, Alexandre; linuxppc-dev@lists.ozlabs.org > >>> Cc: a...@linux-foundation.org; Gala Kumar-B11780; Li Yang-R58472; > >> Zang Roy-R61911 > >>> Subject: RE: [PATCH 2/2][v3] rapidio,powerpc/85xx: Error interrupt > >> handler for sRIO. > >>> > >>> Hi Alex, > >>> > >>> May I ask when would these patches be applied to mainline? > >>> > >>> > >>> Best Regards, > >>> Shaohui Xie > >>> > >>> From: Bounine, Alexandre [mailto:alexandre.boun...@idt.com] > >>> Sent: Wednesday, December 01, 2010 4:49 AM > >>> To: Xie Shaohui-B21989; linuxppc-dev@lists.ozlabs.org > >>> Cc: a...@linux-foundation.org; Li Yang-R58472; Gala Kumar-B11780; > >> Zang Roy-R61911 > >>> Subject: RE: [PATCH 2/2][v3] rapidio, powerpc/85xx: Error interrupt > >> handler for sRIO. > >>> > >>> Applies correctly now. Lab tested on 8548/RIO setup. > >>> > >>> Alex. > >>> > >>>> -----Original Message----- > >>>> From: Shaohui Xie [mailto:b21...@freescale.com] > >>>> Sent: Thursday, November 18, 2010 1:58 AM > >>>> To: linuxppc-dev@lists.ozlabs.org > >>>> Cc: a...@linux-foundation.org; Shaohui Xie; Li Yang; Kumar Gala; > > Roy > >>> Zang; Bounine, Alexandre > >>>> Subject: [PATCH 2/2][v3] rapidio, powerpc/85xx: Error interrupt > >>> handler for sRIO. > >>>> > >>>> The sRIO controller reports errors to the core with one signal, it > >>> uses > >>>> register EPWISR to provides the core quick access to where the > > error > >>> occurred. > >>>> The EPWISR indicates that there are 4 interrupts sources, port1, > >>> port2, message > >>>> unit and port write receive, but the sRIO driver does not support > >>> port2 > >>>> for now, still the handler takes care of port2. > >>>> Currently the handler only clear error status without any > recovery. > >>> > >>> _______________________________________________ > >>> Linuxppc-dev mailing list > >>> Linuxppc-dev@lists.ozlabs.org > >>> https://lists.ozlabs.org/listinfo/linuxppc-dev > >> > >> _______________________________________________ > >> Linuxppc-dev mailing list > >> Linuxppc-dev@lists.ozlabs.org > >> https://lists.ozlabs.org/listinfo/linuxppc-dev _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
