Hi Leon,
> -----Original Message----- > From: Leon Woestenberg [mailto:leon.woestenb...@gmail.com] > Sent: Friday, April 08, 2011 1:55 PM > To: Kushwaha Prabhakar-B32579 > Cc: Moffett, Kyle D; linux-...@vger.kernel.org; Tejun Heo; Jeff Garzik; > Linux PPC; Gupta Maneesh-B18878 > Subject: Re: known working sata_sil24.c setup on powerpc platforms? > > Hello Prabhakar, > > On Fri, Apr 8, 2011 at 5:44 AM, Kushwaha Prabhakar-B32579 > <b32...@freescale.com> wrote: > >> -----Original Message----- > >> From: linux-ide-ow...@vger.kernel.org [mailto:linux-ide- > >> ow...@vger.kernel.org] On Behalf Of Leon Woestenberg > >> Sent: Thursday, April 07, 2011 10:23 PM > >> To: Kushwaha Prabhakar-B32579 > >> Cc: Moffett, Kyle D; Linux PPC; linux-...@vger.kernel.org; Tejun Heo; > >> Jeff Garzik > >> Subject: Re: known working sata_sil24.c setup on powerpc platforms? > >> > >> On Thu, Apr 7, 2011 at 6:48 AM, Kushwaha Prabhakar-B32579 > >> <b32...@freescale.com> wrote: > >> > Can you please check p2020rdb.dts for IDSEL entries for pci0/1 node? > >> > > >> > In order to work in legacy mode, IDSEL entries are required. > >> > > >> No, the p1020rdb and p2020rdb do not have the IDSEL entries: > >> What would the correct IDSEL entries be? > > > > For legacy interrupt to work IDSEL values are required.. please find > the correct IDSEL values for pci0/1. > > > > pci0: pcie@ffe09000 { > > ... > > Please try with this.. I am in process of pushing these IDSEL values to > upstream. > > > > Do you have these for P1020RDB as well? I found a P1020RDB board that > has the CE10 errata fixed, so IRQ0 is properly pulled up. > Same IDSEL values are valid for P1020RDB also. --Prabhakar _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
