Hello Prabhakar, On Fri, Apr 8, 2011 at 5:44 AM, Kushwaha Prabhakar-B32579 <b32...@freescale.com> wrote: >> -----Original Message----- >> From: linux-ide-ow...@vger.kernel.org [mailto:linux-ide- >> ow...@vger.kernel.org] On Behalf Of Leon Woestenberg >> Sent: Thursday, April 07, 2011 10:23 PM >> To: Kushwaha Prabhakar-B32579 >> Cc: Moffett, Kyle D; Linux PPC; linux-...@vger.kernel.org; Tejun Heo; >> Jeff Garzik >> Subject: Re: known working sata_sil24.c setup on powerpc platforms? >> >> On Thu, Apr 7, 2011 at 6:48 AM, Kushwaha Prabhakar-B32579 >> <b32...@freescale.com> wrote: >> > Can you please check p2020rdb.dts for IDSEL entries for pci0/1 node? >> > >> > In order to work in legacy mode, IDSEL entries are required. >> > >> No, the p1020rdb and p2020rdb do not have the IDSEL entries: >> What would the correct IDSEL entries be? > > For legacy interrupt to work IDSEL values are required.. please find the > correct IDSEL values for pci0/1. > > pci0: pcie@ffe09000 { > ... > Please try with this.. I am in process of pushing these IDSEL values to > upstream. >
Do you have these for P1020RDB as well? I found a P1020RDB board that has the CE10 errata fixed, so IRQ0 is properly pulled up. Regards, -- Leon _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
