Micha Nelissen wrote:
Do you mean like attached? I had to change the order of the '_GLOBAL'
definitions __setup_cpu_e500v1/__setup_cpu_e500v2 since this bit is
e500v2 only.
Hmm, maybe need to use r0 or r3 instead of r2?
Micha
Index: linux/arch/powerpc/kernel/cpu_setup_fsl_booke.S
===================================================================
--- linux/arch/powerpc/kernel/cpu_setup_fsl_booke.S (revision 2871)
+++ linux/arch/powerpc/kernel/cpu_setup_fsl_booke.S (working copy)
@@ -57,8 +57,14 @@
ori r3,r3,hid0_dap...@l
mtspr SPRN_HID0,r3
b __setup_e200_ivors
+_GLOBAL(__setup_cpu_e500v2)
+#ifdef CONFIG_PTE_64BIT
+ /* enable mas7 register for tlbre/tlbsx */
+ mfspr r0,SPRN_HID0
+ ori r0,r0,hid0_en_mas7_upd...@l
+ mtspr SPRN_HID0,r0
+#endif
_GLOBAL(__setup_cpu_e500v1)
-_GLOBAL(__setup_cpu_e500v2)
mflr r4
bl __e500_icache_setup
bl __e500_dcache_setup
Index: linux/arch/powerpc/include/asm/reg.h
===================================================================
--- linux/arch/powerpc/include/asm/reg.h (revision 2871)
+++ linux/arch/powerpc/include/asm/reg.h (working copy)
@@ -276,6 +276,7 @@
#define HID0_DAPUEN (1<<8) /* Debug APU enable */
#define HID0_SGE (1<<7) /* Store Gathering Enable */
#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */
+#define HID0_EN_MAS7_UPDATE (1<<7) /* Enable MAS7 reg for tlbre/tlbsx */
#define HID0_DCFA (1<<6) /* Data Cache Flush Assist */
#define HID0_LRSTK (1<<4) /* Link register stack - 745x */
#define HID0_BTIC (1<<5) /* Branch Target Instr Cache Enable */
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
