I'm trying to make use of the GPT as interrupt controller.
My driver is getting most, but not all of the interrupts, besides that
I'm getting a whole bunch of spurious IRQs, so I'm trying to figure
out what's wrong.
gpt6: ti...@660 {
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x660 0x10>;
interrupts = <1 15 0>;
interrupt-controller;
#interrupt-cells = <1>;
};
My device has the interrupt-parent property which links it to the
above interrupt controller.
s...@f00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <0xf00 0x20>;
interrupts = <2 13 0 2 14 0>;
io-control...@0 {
compatible = "microkey,smc4000io";
linux,modalias = "of_smc4000io";
spi-max-frequency = <800000>;
spi-cpha;
reg = <0>;
word-delay-us = <30>;
interrupt-parent = <&gpt6>;
interrupts = <2>; // And make it edge falling
};
There are two things I find suspicious:
- First of all my interrupt is listed as virq# 16, shouldn't it be
virq# 0x50 ? (16 is te L2 value virq# 0x50 of mpc52xx_irqhost_map)
- Secondly in mpc52xx_gpt.c mpc52xx_gpt_irq_mask() and
mpc52xx_gpt_irq_unmask() resp. clear and set the IrqEn bit of the GPT,
which is described in the MPC5200B_UM as "enables interrupt generation
to the CPU for all modes". The word 'generation' makes me suspicious,
because it could mean that while irqEn is cleared an edge on the GPT's
input does not even request an IRQ immediately after the bit is
cleared. Or in other words, clearing the bit could do more that just
masking.
~ # cat /proc/interrupts
CPU0
16: 1338686 MPC52xx GPT Edge smc4000io
129: 83224 MPC52xx Peripherals Level mpc52xx_psc_uart
130: 1 MPC52xx Peripherals Level mpc52xx_psc_uart
133: 0 MPC52xx Peripherals Level mpc52xx-fec_ctrl
134: 0 MPC52xx Peripherals Level ohci_hcd:usb1
135: 16127 MPC52xx Peripherals Level mpc52xx_ata
141: 0 MPC52xx Peripherals Level mpc5200-spi-modf
142: 79184 MPC52xx Peripherals Level mpc5200-spi-spif
192: 0 MPC52xx SDMA Level ATA task
193: 15 MPC52xx SDMA Level mpc52xx-fec_rx
194: 35615 MPC52xx SDMA Level mpc52xx-fec_tx
LOC: 134286 Local timer interrupts
SPU: 576958 Spurious interrupts
CNT: 0 Performance monitoring interrupts
MCE: 0 Machine check exceptions
~ # dmesg |grep 660
[ 1.975928] irq: irq 0 on host /soc5...@f0000000/ti...@660 mapped
to virtual irq 16
~ # dmesg | grep host_map
[ 0.000000] mpc52xx_irqhost_map: virq=81, l1=2, l2=1
[ 0.319272] mpc52xx_irqhost_map: External IRQ1 virq=41, hw=41. type=8
[ 0.376117] mpc52xx_irqhost_map: virq=49, l1=1, l2=9
[ 0.417213] mpc52xx_irqhost_map: virq=4a, l1=1, l2=10
[ 0.452119] mpc52xx_irqhost_map: virq=4b, l1=1, l2=11
[ 0.487031] mpc52xx_irqhost_map: virq=4c, l1=1, l2=12
[ 0.529899] mpc52xx_irqhost_map: virq=4d, l1=1, l2=13
[ 0.564821] mpc52xx_irqhost_map: virq=4e, l1=1, l2=14
[ 0.599744] mpc52xx_irqhost_map: virq=4f, l1=1, l2=15
[ 0.634669] mpc52xx_irqhost_map: virq=50, l1=1, l2=16
[ 1.629764] mpc52xx_irqhost_map: virq=82, l1=2, l2=2
[ 1.667194] mpc52xx_irqhost_map: virq=84, l1=2, l2=4
[ 1.763299] mpc52xx_irqhost_map: virq=87, l1=2, l2=7
[ 1.790510] mpc52xx_irqhost_map: virq=c0, l1=3, l2=0
[ 1.909341] mpc52xx_irqhost_map: virq=8d, l1=2, l2=13
[ 1.936712] mpc52xx_irqhost_map: virq=8e, l1=2, l2=14
[ 2.055579] mpc52xx_irqhost_map: virq=c1, l1=3, l2=1
[ 2.083018] mpc52xx_irqhost_map: virq=c2, l1=3, l2=2
[ 2.110345] mpc52xx_irqhost_map: virq=85, l1=2, l2=5
[ 2.211890] mpc52xx_irqhost_map: virq=86, l1=2, l2=6
~
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
